journal article·2015-08Open access

Small molecules containing rigidified thiophenes and a cyanopyridone acceptor unit for solution-processable bulk-heterojunction solar cells

Akhil Gupta, Abdelselam Ali, Mei Gao, Th. Birendra Singh, Ante Bilic, Scott E. Watkins, Udo Bach, Richard A. Evans

Dyes and Pigments· Volume 119

Abstract

Abstract We designed two solution processable small molecules, 5-((5-(4-(diphenylamino)phenyl)thieno[3,2-b]thiophene-2-yl)methylene)-1-(2-ethylhexyl)-4-methyl-2,6-dioxo-1,2,5,6-tetrahydropyridine-3-carbonitrile (1) and 5-((6-(4-(diphenylamino)phenyl)-4-(2-ethylhexyl)-4H-dithieno[3,2-b:2′,3′-d]pyrrol-2-yl)methylene)-1-(2-ethylhexyl)-4-methyl-2,6-dioxo-1,2,5,6-tetrahydropyridine-3-carbonitrile (2), consisting of a triphenylamine electron donating group and a cyanopyridone electron accepting group linked by two different rigidified π-spacer thiophenes. Ultraviolet–visible absorption spectra revealed that the use of three fused rings (dithienopyrrole) as the conjugated π-spacer resulted in an enhanced intramolecular charge transfer transition and reduction of band gap, when compared with a non-fused bithiophene and two fused thiophenes (thienothiophene) analogues. Power conversion efficiencies (PCEs) of 2.39% and 2.14% were achieved for simple photovoltaic devices based on 1/PC61BM and 2/PC61BM under simulated AM 1.5 illumination (100 mW cm−2), respectively. It has been observed that the degree of conjugation of the central π-bridge was not a key factor for the enhancement of photovoltaic performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
2. π-conjugated polymers for organic electronics and photovoltaic cell applications10.1021/cm102419z ↗
3. Processable low-bandgap polymers for photovoltaic applications10.1021/cm1021855 ↗
4. Band-gap tuning of pendant polymers for organic light-emitting devices and photovoltaic applications10.1016/j.synthmet.2011.02.013 ↗
5. Fullerene derivative acceptors for high performance polymer solar cells10.1039/C0CP01178A ↗
6. Small molecule solution-processed bulk heterojunction solar cells10.1021/cm102189g ↗
7. Solution processable D–A small molecules for bulk-heterojunction solar cells10.1039/c003946b ↗
8. Small-molecule, nonfullerene acceptors for polymer bulk heterojunction organic photovoltaics10.1021/cm1023019 ↗
9. Small molecule organic semiconductors on the move: promises for future solar energy technology10.1002/anie.201102326 ↗
10. Small molecule semiconductors for high-efficiency organic photovoltaics10.1039/c2cs15313k ↗
11. Polymer–fullerene composite solar cells10.1002/anie.200702506 ↗
12. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
13. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
14. Development of novel conjugated donor polymers for high-efficiency bulk-heterojunction photovoltaic devices10.1021/ar900061z ↗
15. Synthesis of conjugated polymers for organic solar cell applications10.1021/cr900182s ↗
16. Conjugated polymer photovoltaic materials with broad absorption band and high charge carrier mobility10.1002/adma.200800606 ↗
17. Solvent-annealed crystalline squaraine:PC70BM (1:6) solar cells10.1002/aenm.201100045 ↗
18. Spin-coated small molecules for high performance solar cells10.1002/aenm.201100230 ↗
19. Tailored merocyanine dyes for solution-processed BHJ solar cells10.1039/B916181C ↗
20. Near-infrared absorbing merocyanine dyes for bulk heterojunction solar cells10.1021/ol101492q ↗
21. Nanoscale phase separation and high photovoltaic efficiency in solution-processed, small-molecule bulk heterojunction solar cells10.1002/adfm.200900832 ↗
22. Dibenzo[b,def ]chrysene derivatives: solution-processable small molecules that deliver high power-conversion efficiencies in bulk heterojunction solar cells10.1021/cm9028337 ↗
23. Molecular engineering of push-pull chromophore for efficient bulk-heterojunction morphology in solution processed small molecule organic photovoltaics10.1039/c1jm10667h ↗
24. Absorption enhancement of oligothiophene dyes through the use of a cyanopyridone acceptor group in solution-processed organic solar cells10.1039/c2cc17325e ↗
25. The effect of direct amine substituted push-pull oligothiophene chromophores on dye-sensitized and bulk heterojunction solar cells performance10.1016/j.tet.2013.02.040 ↗
26. Solution processable rhodanine-based small molecule organic photovoltaic cells with a power conversion efficiency of 6.1%10.1002/aenm.201100572 ↗
27. Non-basic high-performance molecules for solution-processed organic solar cells10.1002/adma.201201127 ↗
28. Small molecules based on benzo[1,2-b:4,5-b′]dithiophene unit for high-performance solution-processed organic solar cells10.1021/ja306865z ↗
29. Barium: an efficient cathode layer for bulk-heterojunction solar cells10.1038/srep01965 ↗
30. Solution-processed and high-performance organic solar cells using small molecules with a benzodithiophene unit10.1021/ja403318y ↗
31. Molecular engineering for panchromatic absorbing oligothiophene donor-acceptor organic semiconductors10.1016/j.tet.2012.09.009 ↗
32. Design rules for donors in bulk-heterojunction solar cells-towards 10% energy-conversion efficiency10.1002/adma.200501717 ↗
33. Cyanomethylbenzoic acid: an acceptor for donor–π–acceptor chromophores used in dye-sensitized solar cells10.1002/cssc.201200636 ↗
34. N-alkyl- and N-aryl-dithieno[3,2-b:2′,3′-d]pyrrole-containing organic dyes for efficient dye-sensitized solar cells10.1016/j.tet.2014.02.002 ↗
35. Analysis of solids, liquids, and biological tissues using solids probe introduction at atmospheric pressure on commercial LC/MS instruments10.1021/ac051470k ↗
36. Frisch · 2013
37. Toward a rational design of poly(2,7-carbazole) derivatives for solar cells10.1021/ja0771989 ↗
38. Correlation between oxidation potential and open-circuit voltage of composite solar cells based on blends of polythiophenes/fullerene derivative10.1063/1.1650878 ↗
39. Poly(diketopyrrolopyrrole−terthiophene) for ambipolar logic and photovoltaics10.1021/ja907506r ↗