journal article·2024-08Open access

Reduction of interface defects in gate-recessed GaN HEMTs by neutral beam etching

Chia Hao Yu, Wei Hsiang Chiang, Yi-Ho Chen, Seiji Samukawa, Dong Sing Wuu, Chin-Han Chung, Ching-Lien Hsiao, Ray Hua Horng

Abstract

This study investigates and compares the impact of different etching techniques on the fabrication of GaN high electron mobility transistors (HEMTs) between the inductively coupled plasma reactive ion etching (ICP-RIE) and the neutral beam etching (NBE) for the gate recess. By conducting direct current analysis, it was found that devices manufactured using the NBE exhibited superior electrical performance as compared with those produced using the ICP-RIE. These enhanced electrical characteristics include a transconductance of up to 100.4 mS/mm, a threshold voltage (V th ) of −2.3 V, an on/off current ratio of 1.1 × 10 9 , a subthreshold swing (S.S.) of 99.63 mV/dec, and a remarkably low gate leakage current. Additionally, we noted varying degrees of hysteresis in the I–V characteristics were related to process disparities possibly leading to interface defects. Multi-frequency capacitance-voltage (C–V) measurements were used to identify the interface defects at the oxide/AlGaN interface of the gate. The results revealed that devices fabricated using the NBE exhibited a lower interface defect density as compared with those fabricated using the ICP-RIE, thereby elucidating the reduced hysteresis observed in the I–V characteristics. These findings indicated the significant advantages of the NBE process in the fabrication of GaN HEMTs.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: GaN-based semiconductor devices and materials · Semiconductor materials and devices · Advancements in Semiconductor Devices and Circuit Design

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Comparative study between partially and fully recessed-gate enhancement-mode AlGaN/GaN MIS HEMT on the breakdown mechanism10.1002/pssa.201900115 ↗
2. Recessed-gate enhancement-mode GaN HEMT with high threshold voltage10.1049/el:20050161 ↗
3. Recessed-gate structure approach toward normally off high-Voltage AlGaN/GaN HEMT for power electronics applications10.1109/TED.2005.862708 ↗
4. Recessed 0.25 μm gate AlGaN/GaN HEMTs on SiC with high gate-drain breakdown voltage using ICP-RIE10.1049/el:20010999 ↗
5. Improving GaN-based HEMTs performance by gate recess technique
6. Study on positive threshold voltage shift and DC characteristics of HEMTs using gate recess technique10.1142/S021798492141013X ↗
7. Analysis of GaN damage induced by Cl2/SiCl4/Ar plasma10.1143/JJAP.50.08JE03 ↗
8. Synergy effect of particle radiation and ultraviolet radiation from capacitively coupled radio frequency argon plasmas on n-GaN etching damage10.1143/JJAP.47.6863 ↗
9. Analysis of GaN etching damage by capacitively coupled RF Ar plasma exposure10.1016/j.tsf.2007.08.019 ↗
10. Interface properties of Al2O3/n-GaN structures with inductively coupled plasma etching of GaN surfaces10.1143/JJAP.51.060201 ↗
11. NH3/N2 plasma treatment on etched AlGaN surface for high-performance p-GaN HEMTs fabrication10.1016/j.mssp.2023.107761 ↗
12. Characteristics of n-GaN after Cl2/Ar and Cl2/N2 inductively coupled plasma etching10.1143/JJAP.42.6409 ↗
13. Positive-bias temperature instability (PBTI) of GaN MOSFETs
14. Current collapse and high-electric-field reliability of unpassivated GaN/alGaN/GaN HEMTs10.1109/TED.2006.885681 ↗
15. High-field stress, low-frequency noise, and long-term reliability of AlGaN/GaN HEMTs10.1109/TDMR.2016.2581178 ↗
16. Review of dynamic effects and reliability of depletion and enhancement GaN HEMTs for power switching applications10.1049/iet-pel.2017.0403 ↗
17. AlGaN/GaN HEMTs with damage-free neutral beam etched gate recess for high-performance millimeter-wave applications10.1109/LED.2016.2609938 ↗
18. Enhancement-mode AlGaN/GaN MIS-HEMTs with low threshold voltage hysteresis using damage-free neutral beam etched gate recess
19. Enhancing the performance of E-mode AlGaN/GaN HEMTs with recessed gates through low-damage neutral beam etching and post-metallization annealing10.1109/OJNANO.2023.3306011 ↗
20. Neutral beam process in AlGaN/GaN HEMTs: impact on current collapse10.1016/j.sse.2017.07.015 ↗
21. AlN passivation by plasma-enhanced atomic layer deposition for GaN-based power switches and power amplifiers10.1088/0268-1242/28/7/074015 ↗
22. A novel insight on interface traps density (dit) extraction in GaN-on-Si MOS-c HEMTs
23. Characterization of interface defects with distributed activation energies in GaN-based MIS-HEMTs10.1109/TED.2017.2655367 ↗
24. Characterization of deep and shallow traps in GaN HEMT using multi-frequency C-V measurement and pulse-mode voltage stress10.1109/TDMR.2019.2910454 ↗
25. Mapping of interface traps in high-performance Al2O3/AlGaN/GaN MIS-heterostructures using frequency- and temperature-dependent C-V techniques
26. Correlation between dynamic Rdsou transients and Carbon related buffer traps in AlGaN/GaN HEMTs
27. Evolution of surface roughness of AlN and GaN induced by inductively coupled Cl2/Ar plasma etching10.1063/1.1688993 ↗
28. Effect of dry etching conditions on surface morphology and optical properties of GaN films in chlorine-based inductively coupled plasmas10.1116/1.1336830 ↗
29. 3 - physical properties of gallium nitride and related III–V nitrides
30. Analytical derivation of interface state density from sub-threshold swing in AlGaN/GaN metal–insulator–semiconductor high-electron-mobility transistors10.7567/JJAP.56.104101 ↗
31. GaN MIS-HEMTs with nitrogen passivation for power device applications10.1109/LED.2014.2345130 ↗
32. Effect of border traps on the threshold voltage instability of fluoride-doped AlGaN/GaN metal–insulator–semiconductor high-electron-mobility transistors10.1088/1361-6463/ab053d ↗