Structural and morphological tuning of dithienobenzodithiophene-core small molecules for efficient solution processed organic solar cells
Source abstract
Abstract
Abstract The fused dithieno[2,3- d :2′,3′- d ′]benzo[1,2- b :4,5- b ′]dithiophene (DTBDT) structure was coupled with diketopyrrolopyrrole (DPP) moieties to generate highly planar bis(2,5-bis(2-ethylhexyl)-3,6-di(thiophen-2-yl)-2,5-dihydropyrrolo[3,4- c ]pyrrole-1,4-dione)dithieno[2,3- d :2′,3′- d ′]benzo[1,2- b :4,5- b ′]dithiophene (DTBDTDPP-EH) and bis(2,5-bis(2-butyloctyl)-3,6-di(thiophen-2-yl)-2,5-dihydropyrrolo[3,4- c ]pyrrole-1,4-dione)dithieno[2,3- d :2′,3′- d ′]benzo[1,2- b :4,5- b ′]dithiophene (DTBDTDPP-BO) molecules, where the EH and BO stands for 2-ethylhexyl and 2-butyloctyl groups respectively. The morphology of the DTBDTDPP-EH alone or DTBDTDPP-EH:[6,6]-phenyl-C 61 -butyric acid methyl ester (PCBM) blend film was controlled using post-thermal annealing at 130 °C or addition of 1,8-diiodooctane (DIO) additives. The DIO-additive treatment was more effective than thermal annealing at increasing crystallinity; the DIO-additives promoted the formation of nanoscopically well-connected molecular crystalline domains in the blend films. This observation well explained the ordering of the photovoltaic properties of DTBDTDPP-EH:PCBM devices: from worst to best, as-cast, thermally treated, and DIO-treated photoactive films. The DTBDTDPP-BO:PCBM device followed the similar trend with lower performances due to the presence of irregularly overgrown domains. Overall, we demonstrate that it is critical to optimize nanoscale film morphologies by engineering alkyl chains and selecting an appropriate processing method.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Design and synthesis of molecular donors for solution-processed high-efficiency organic solar cells10.1021/ar400136b ↗
2. High performance photovoltaic applications using solution-processed small molecules10.1021/ar400088c ↗
3. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
4. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
5. Synergistic effect of fluorination on molecular energy level modulation in highly efficient photovoltaic polymers10.1002/adma.201304427 ↗
6. High-efficiency polymer solar cells via the incorporation of an amino-functionalized conjugated metallopolymer as a cathode interlayer10.1021/ja408363c ↗
7. Fast inline roll-to-roll printing for indium-tin-oxide-free polymer solar cells using automatic registration10.1002/ente.201200029 ↗
8. 25th Anniversary article: rise to power – OPV-based solar parks10.1002/adma.201302031 ↗
9. It is all in the pattern—high-efficiency power extraction from polymer solar cells through high-voltage serial connection10.1002/ente.201200055 ↗
10. Roll-to-roll fabrication of large area functional organic materials10.1002/polb.23192 ↗
11. Fullerene derivative-doped zinc oxide nanofilm as the cathode of inverted polymer solar cells with low-bandgap polymer (PTB7-Th) for high performance10.1002/adma.201301476 ↗
12. Improved light harvesting and improved efficiency by insertion of an optical spacer (ZnO) in solution-processed small-molecule solar cells10.1021/nl401758g ↗
13. Solution-processed and high-performance organic solar cells using small molecules with a benzodithiophene unit10.1021/ja403318y ↗
14. Solution-processed organic solar cells based on dialkylthiol-substituted benzodithiophene unit with efficiency near 10%10.1021/ja509703k ↗
15. Small molecule organic semiconductors on the move: promises for future solar energy technology10.1002/anie.201102326 ↗
16. Solution-processed DPP-based small molecule that gives high photovoltaic efficiency with judicious device optimization10.1021/am302896u ↗
17. Enhanced photovoltaic performance of low-bandgap polymers with deep LUMO levels10.1002/anie.201003357 ↗
18. Development of fluorinated benzothiadiazole as a structural unit for a polymer solar cell of 7 % efficiency10.1002/anie.201005451 ↗
19. Non-basic high-performance molecules for solution-processed organic solar cells10.1002/adma.201201127 ↗
20. Side-chain effect on cyclopentadithiophene/fluorobenzothiadiazole-based low band gap polymers and their applications for polymer solar cells10.1021/ma4009302 ↗
21. Solution-processed small-molecule solar cells with 6.7% efficiency10.1038/nmat3160 ↗
22. High-molecular-weight regular alternating diketopyrrolopyrrole-based terpolymers for efficient organic solar cells10.1002/anie.201302319 ↗
23. Photocurrent enhancement from diketopyrrolopyrrole polymer solar cells through alkyl-chain branching point manipulation10.1021/ja406934j ↗
24. A naphthodithiophene-diketopyrrolopyrrole donor molecule for efficient solution-processed solar cells10.1021/ja202791n ↗
25. A “zig-zag” naphthodithiophene core for increased efficiency in solution-processed small molecule solar cells10.1039/c2cc32646a ↗
26. Optimization of energy levels by molecular design: evaluation of bis-diketopyrrolopyrrole molecular donor materials for bulk heterojunction solar cells10.1039/c3ee24351f ↗
27. Nanoscale phase separation and high photovoltaic efficiency in solution-processed, small-molecule bulk heterojunction solar cells10.1002/adfm.200900832 ↗
28. Effects of solvent additives on morphology, charge generation, transport, and recombination in solution-processed small-molecule solar cells10.1002/aenm.201301469 ↗
29. Understanding the role of thermal processing in high performance solution processed small molecule bulk heterojunction solar cells10.1002/aenm.201200631 ↗
30. A solution-processable small molecule based on benzodithiophene and diketopyrrolopyrrole for high-performance organic solar cells10.1002/aenm.201300181 ↗
31. Influence of the position of the side chain on crystallization and solar cell performance of DPP-based small molecules10.1021/cm4034484 ↗
32. Diketopyrrolopyrrole (DPP)-based materials for organic photovoltaics10.1039/c2cc17886a ↗
33. Nanoscopic management of molecular packing and orientation of small molecules by a combination of linear and branched alkyl side chains10.1021/nn501133y ↗
34. Synthetic control of structural order in N-alkylthieno[3,4-c]pyrrole-4,6-dione-based polymers for efficient solar cells10.1021/ja103275u ↗
35. Highly efficient solar cell polymers developed via fine-tuning of structural and electronic properties10.1021/ja901545q ↗
36. Highly efficient 2D-conjugated benzodithiophene-based photovoltaic polymer with linear alkylthio side chain10.1021/cm501513n ↗
37. Correlation between polymer structure and polymer:fullerene blend morphology and its implications for high performance polymer solar cells10.1021/jp405744d ↗
38. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
39. Processing additives for improved efficiency from bulk heterojunction solar cells10.1021/ja710079w ↗
40. Effects of additives on the morphology of solution phase aggregates formed by active layer components of high-efficiency organic solar cells10.1021/ja2085564 ↗
41. Solvent additive effects on small molecule crystallization in bulk heterojunction solar cells probed during spin casting10.1002/adma.201302389 ↗
42. Improving device efficiency of polymer/fullerene bulk heterojunction solar cells through enhanced crystallinity and reduced grain boundaries induced by solvent additives10.1002/adma.201101274 ↗
43. Controlling polarity of organic bulk heterojunction field-effect transistors via solvent additives10.1021/am400546x ↗
44. Synthesis and photovoltaic effect in dithieno[2,3-d:2′,3′-d′]benzo[1,2-b:4,5-b′]dithiophene-based conjugated polymers10.1002/adma.201204238 ↗
45. PDT-S-T: a new polymer with optimized molecular conformation for controlled aggregation and π–π stacking and its application in efficient photovoltaic devices10.1002/adma.201301174 ↗
46. Systematic investigation of benzodithiophene- and diketopyrrolopyrrole-based low-bandgap polymers designed for single junction and tandem polymer solar cells10.1021/ja301460s ↗
47. J-aggregation induced low bandgap anthracene-based conjugated molecule for solution-processed solar cells10.1039/c2cc34109c ↗
48. The spectral signatures of Frenkel Polarons in H- and J-aggregates10.1021/ar900233v ↗
49. Small-angle X-ray scattering and ultraviolet-visible spectroscopy studies on the structure and structural changes in Langmuir-Blodgett films of polyglutamates with azobenzene moieties tethered by alkyl spacers of different length10.1021/la00018a052 ↗
50. Self-organizing mesomorphic diketopyrrolopyrrole derivatives for efficient solution-processed organic solar cells10.1021/cm401244x ↗
51. Formation of highly crystalline and texturized donor domains in DPP(TBFu)2:PC71BM SM-BHJ devices via solvent vapour annealing: implications for device function10.1039/c2jm31235b ↗
52. A fluorinated phenylene unit as a building block for high-performance n-type semiconducting polymer10.1002/adma.201205320 ↗
53. Ground- and excited-state electronic structures of the solar cell sensitizer bis(4,4′-dicarboxylato-2,2′-bipyridine)bis(isothiocyanato)ruthenium(II)10.1021/jp020927g ↗
54. Natural transition orbitals
55. Exciton localization in a Pt–acetylide complex10.1021/jp053139a ↗
56. The quantified NTO analysis for the electronic excitations of molecular many-body systems10.1016/j.cplett.2011.08.066 ↗
57. Polymer–fullerene composite solar cells10.1002/anie.200702506 ↗
58. Competition between the charge transfer state and the singlet states of donor or acceptor limiting the efficiency in polymer:fullerene solar cells10.1021/ja210029w ↗
59. Structure, dynamics, and power conversion efficiency correlations in a new low bandgap polymer: PCBM solar cell10.1021/jp909135k ↗
60. Hierarchical nanomorphologies promote exciton dissociation in polymer/fullerene bulk heterojunction solar cells10.1021/nl201715q ↗
61. Effect of charge recombination on the fill factor of small molecule bulk heterojunction solar cells10.1002/aenm.201100040 ↗
62. Effect of asymmetric solubility of diketopyrrolopyrrole-based polymers and PC71BMs in a binary solvent system on the performance of bulk heterojunction solar cells10.1016/j.solmat.2014.02.011 ↗
63. Multi-length-scale morphologies in PCPDTBT/PCBM bulk-heterojunction solar cells10.1002/aenm.201100726 ↗
64. Electrical performance of organic solar cells with additive-assisted vertical phase separation in the photoactive layer10.1002/aenm.201300612 ↗