journal article·2014-10

Improved photovoltaic performance of two-dimensional low band-gap conjugated polymers with thieno[3,2-b]thiophene and diketopyrrolopyrrole units by altering pendent position of conjugated side chain

Dongfeng Dang, Pei Zhou, Qing Peng, Keqi He, Haigang Jiang, Pingao Yang, Hua Tan, Yafei Wang, Yu Liu, Gangtie Lei, Weiguo Zhu

Dyes and Pigments· Volume 109
Publisher page

Abstract

Abstract Two-dimensional low band-gap copolymers of P1 and P2 with a framework of (2,5-di(thiophen-2-yl)thieno[3,2-b]thiophene)- alt -(2,5-bis(2-ethylhexyl)-3,6-di(thiophen-2-yl)pyrrolo[3,4-c]pyrrole-1,4(2 H ,5 H )-dione) (DTTT- alt -DTPP) were synthesized, in which two 2,3-dioctylthiophene-5-yl groups were pended into the 3-positions of two thiophenyl rings close to the thieno[3,2-b]thiophene (TT) unit for P1 and the 3, 6-positions of the TT unit for P2, respectively. The influence of pending positions on optophysical and photovoltaic properties were studied. Similar broad absorption spectra from 350 to 950 nm were observed with a low band-gap of 1.25 eV. However, significantly different photovoltaic properties were obtained in the bulk heterojunction polymer solar cells with a device structure of ITO/PEDOT:PSS/active layer/LiF/Al. The P1-based devices showed a power conversion efficiency (PCE) of 0.79%, but the P2-based devices displayed a notably increasing PCE up to 2.12% under an AM 1.5G irradiation with an intensity of 100 mW cm −2 . Our results indicate that altering pendent position of alkyl thiophene is effective way to improve the photovoltaic properties for the two-dimensional copolymers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption10.1021/ar2002446 ↗
2. Rational design of high performance conjugated polymers for organic solar cells10.1021/ma201648t ↗
3. Recent development of push–pull conjugated polymers for bulk-heterojunction photovoltaics: rational design and fine tailoring of molecular structures10.1039/c2jm30470h ↗
4. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
5. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
6. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
7. Prominent short-circuit currents of fluorinated quinoxaline based copolymer solar cells with a power conversion efficiency of 8.0%10.1021/cm302861s ↗
8. PDT-S-T: a new polymer with optimized molecular conformation for controlled aggregation and π–π stacking and its application in efficient photovoltaic devices10.1002/adma.201301174 ↗
9. Efficient polymer solar cells with a high open circuit voltage of 1 volt10.1002/adfm.201201535 ↗
10. Bulk heterojunction solar cells using thieno[3,4-c] pyrrole-4,6-dione and dithieno[3,2-b:2',3'-d]silole copolymer with a power conversion efficiency of 7.3%10.1021/ja200314m ↗
11. Donor–acceptor type low band gap polymers: polysquaraines and related systems10.1039/B204251G ↗
12. Replacing alkoxy groups with alkylthienyl groups: a feasible approach to improve the properties of photovoltaic polymers10.1002/anie.201103313 ↗
13. Two-dimensional regioregular polythiophenes with conjugated side chains for use in organic solar cells10.1016/j.solmat.2008.12.017 ↗
14. Effects of side-chain interdigitation on stability: an environmentally, electrically, and thermally stable semiconducting polymer10.1021/am201301u ↗
15. High-performance ambipolar transistors and inverters from an ultralow bandgap polymer10.1002/adma.201103836 ↗
16. A [3,2-b]thienothiophene-alt-benzothiadiazole copolymer for photovoltaic applications: design, synthesis, material characterization and device performances10.1039/b819177h ↗
17. A selenium-substituted low-bandgap polymer with versatile photovoltaic applications10.1002/adma.201203827 ↗
18. A novel benzo[1,2-b:4,5-b']dithiophene-based conjugated polymer with a pendant diketopyrrolopyrrole unit for high-performance solar cells10.1021/ma302243r ↗
19. Diketopyrrolopyrrole (DPP)-based materials for organic photovoltaics10.1039/c2cc17886a ↗
20. A high mobility p-type DPP-thieno[3,2-b]thiophene copolymer for organic thin-film transistors10.1002/adma.201002313 ↗
21. Importance of solubilizing group and backbone planarity in low band gap polymers for high performance ambipolar field-effect transistors10.1021/cm2037487 ↗
22. Low bandgap copolymer of 1,4-diketopyrrolo[3,4-c]pyrrole and thieno[3,2-b] thiophene: synthesis and applications in polymer solar cells and field- effect transistors10.1016/j.synthmet.2011.06.015 ↗
23. Low band gap selenophenediketo- pyrrolopyrrole polymers exhibiting high and balanced ambipolar performance in bottom-gate transistors10.1039/C1SC00477H ↗
24. Systematic investigation of benzodithiophene and diketopyrrolopyrrole-based low-bandgap polymers designed for single junction and tandem polymer solar cells10.1021/ja301460s ↗
25. Improved charge transport and absorption coefficient in indacenodithieno[3,2-b] thiophene-based ladder-type polymer leading to highly efficient polymer solar cells10.1002/adma.201203246 ↗
26. High charge carrier mobility, low band gap donor-acceptor benzothiadiazole-oligothiophene based polymeric semiconductors10.1021/cm3021929 ↗
27. Synthesis, characterization and photovoltaic properties of poly(cyclopentadithiophene -alt-isoindigo)10.1039/c3py00119a ↗
28. Electrochemical considerations for determining absolute frontier orbital energy levels of conjugated polymers for solar cell applications10.1002/adma.201004554 ↗
29. Band structure engineering for low band gap polymers containing thienopyrazine10.1039/c2jm12312f ↗
30. Influence of D/A ratio on photovoltaic performance of a highly efficient polymer solar cell system10.1002/adma.201202719 ↗
31. Synthesis of quinoxaline-based donor-acceptor narrow-band- gap polymers and their cyclized derivatives for bulk-heterojunction polymer solar cell applications10.1021/ma1027164 ↗