Vinylene- and ethynylene-bridged perylene diimide dimers as nonfullerene acceptors for polymer solar cells
Source abstract
Abstract
Abstract Vinylene ( V )- and ethynylene ( E )-bridged perylene diimide dimers ( PDI-V and PDI-E ) were designed, synthesized and used as nonfullerene acceptors for polymer solar cells. Our researches revealed that the linkage between two PDI units has a great impact on the molecular geometry, the optical properties, the blend film morphology, the molecular packing orientation, and the photovoltaic performance. Computational calculations via density functional theory (DFT) showed that PDI-E and PDI-V possessed planar and twisted geometric structures, respectively. TEM investigations showed that PTB7-Th : PDI-V based blend film exhibited a uniform morphology with small domain size and PTB7-Th : PDI-E based one showed apparent phase separation with large domain size. GIWAXS results revealed that the PDI-V can influence PTB7-Th to take on a face-on orientation, which is beneficial for vertical charge transport to increase J sc . A PCE of 4.51% with a V oc of 0.76 V, a J sc of 10.03 mA cm −2 , and an FF of 0.59 was obtained for PSCs based on PTB7-Th : PDI-V , which is almost two times higher than that of PTB7-Th : PDI-E based devices, which showed a PCE of 2.66%, a V oc of 0.66 V, a J sc of 7.33 mA cm −2 , and an FF of 0.55. These results help to gain deeper insight into the design of new nonfullerene small molecular acceptors for high efficiency PSCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Photoinduced electron-transfer from a conducting polymer to buckminsterfullerene10.1126/science.258.5087.1474 ↗
2. 25th anniversary article: bulk heterojunction solar cells: understanding the mechanism of operation10.1002/adma.201304373 ↗
3. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200903697 ↗
4. Synthesis of conjugated polymers for organic solar cell applications10.1021/cr900182s ↗
5. Evaluating the photovoltaic properties of two conjugated polymers synthesized by Suzuki polycondensation and direct C-H activation10.1007/s11426-014-5278-5 ↗
6. 6,7-dialkoxy-2,3-diphenylquinoxaline based conjugated polymers for solar cells with high open-circuit voltage10.1007/s10118-013-1275-y ↗
7. The influence of molecular orientation on organic bulk heterojunction solar cells10.1038/nphoton.2014.55 ↗
8. Realizing over 10% efficiency in polymer solar cell by device optimization10.1007/s11426-014-5273-x ↗
9. n-Type water/alcohol-soluble naphthalene diimide-based conjugated polymers for high-performance polymer solar cells10.1021/jacs.5b12664 ↗
10. Efficient inverted polymer solar cells employing favourable molecular orientation10.1038/nphoton.2015.84 ↗
11. Recent advances of non-fullerene, small molecular acceptors for solution processed bulk heterojunction solar cells10.1039/C3TA14236A ↗
12. High-efficiency non-fullerene organic solar cells enabled by a difluorobenzothiadiazole-based donor polymer combined with a properly matched small molecule acceptor10.1039/C4EE02990A ↗
13. Nonfullerene polymer solar cells with 8.5% efficiency enabled by a new highly twisted electron acceptor dimer10.1002/adma.201503801 ↗
14. 8.4% efficient fullerene-free organic solar cells exploiting long-range exciton energy transfer10.1038/ncomms4406 ↗
15. Bulk-heterojunction organic solar cells: five core technologies for their commercialization10.1002/adma.201601197 ↗
16. Alkoxy substituted benzodithiophene-alt-fluorobenzotriazole copolymer as donor in non-fullerene polymer solar cells10.1007/s11426-016-0173-y ↗
17. Donor polymer design enables efficient non-fullerene organic solar cells10.1038/ncomms13094 ↗
18. Side-Chain isomerization on n-type organic semiconductor ITIC acceptor make 11.77% high efficiency polymer solar cells10.1021/jacs.6b09110 ↗
19. High-efficiency nonfullerene polymer solar cells with medium bandgap polymer donor and narrow bandgap organic semiconductor acceptor10.1002/adma.201601595 ↗
20. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
21. Tetrafluoroquinoxaline based polymers for non-fullerene polymer solar cells with efficiency over 9%10.1016/j.nanoen.2016.10.008 ↗
22. Side chain effect of nonfullerene acceptors on the photovoltaic performance of wide band gap polymer solar cells10.1016/j.synthmet.2016.07.015 ↗
23. 1,8-Naphthalimide-Based planar small molecular acceptor for organic solar cells10.1021/acsami.5b10211 ↗
24. 1,8-Naphthalimide-based nonfullerene acceptors for wide optical band gap polymer solar cells with an ultrathin active layer thickness of 35 nm10.1039/C6TC01438K ↗
25. A nonfullerene acceptor for wide band gap polymer based organic solar cells10.1039/C5CC08023A ↗
26. NDI-based small molecule as promising nonfullerene acceptor for solution-processed organic photovoltaics10.1002/aenm.201500195 ↗
27. Covalently bound clusters of alpha-substituted PDI-Rival electron acceptors to fullerene for organic solar cells10.1021/jacs.6b03562 ↗
28. High-performance solution-processed non-fullerene organic solar cells based on selenophene-containing perylene bisimide acceptor10.1021/jacs.5b11149 ↗
29. Efficient organic solar cells with helical perylene diimide electron acceptors10.1021/ja5092613 ↗
30. Bay-linked perylene bisimides as promising non-fullerene acceptors for organic solar cells10.1039/C3CC47204C ↗
31. Towards rational design of organic electron acceptors for photovoltaics: a study based on perylenediimide derivatives10.1039/c3sc51841h ↗
32. A perylene bisimide derivative with a LUMO level of-4.56 eV for non-fullerene solar cells10.1039/C6TC01045H ↗
33. Non-fullerene-acceptor-based bulk-heterojunction organic solar cells with efficiency over 7%10.1021/jacs.5b06414 ↗
34. Ring-fusion as a perylenediimide dimer design concept for high-performance non-fullerene organic photovoltaic acceptors10.1039/C5SC04956C ↗
35. In-depth understanding of photocurrent enhancement in solution-processed small-molecule:perylene diimide non-fullerene organic solar cells10.1002/pssa.201532102 ↗
36. Effects of crystalline perylenediimide acceptor morphology on optoelectronic properties and device performance10.1021/acs.chemmater.6b01230 ↗
37. Fullerene-free organic solar cells with an efficiency of 3.7% based on a low-cost geometrically planar perylene diimide monomer10.1039/C4TA02851A ↗
38. Efficient organic solar cells with helical perylene diimide electron acceptors10.1021/ja5092613 ↗
39. Synthesis, characterization and photovoltaic performance of novel glass-forming perylenediimide derivatives10.1016/j.orgel.2016.04.025 ↗
40. Achieving high performance non-fullerene organic solar cells through tuning the numbers of electron deficient building blocks of molecular acceptors10.1016/j.jpowsour.2016.05.119 ↗
41. Electron acceptors based on alpha-substituted perylene diimide (PDI) for organic solar cells10.1021/acs.chemmater.5b04570 ↗
42. Geometrically controlled organic small molecule acceptors for efficient fullerene-free organic photovoltaic devices10.1039/C6TA04344E ↗
43. Influence of molecular geometry of perylene diimide dimers and polymers on bulk heterojunction morphology toward high-performance nonfullerene polymer solar cells10.1002/adfm.201501971 ↗
44. Perylene diimide based all small-molecule organic solar cells: impact of branched-alkyl side chains on solubility, photophysics, self-assembly, and photovoltaic parameters10.1016/j.orgel.2016.05.012 ↗
45. A vinylene-bridged perylenediimide-based polymeric acceptor enabling efficient all-polymer solar cells processed under ambient conditions10.1002/adma.201602387 ↗
46. Energy-level modulation of small-molecule electron acceptors to achieve over 12% efficiency in polymer solar cells10.1002/adma.201602776 ↗
47. Single-junction binary-blend nonfullerene polymer solar cells with 12.1% efficiency10.1002/adma.201700144 ↗
48. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
49. Terminal modulation of d-pi-a small molecule for organic photovoltaic materials: a theoretical molecular design10.1021/acs.jpcc.6b09927 ↗
50. Correlation of intermolecular packing distance and crystallinity of D-A polymers according to pi-spacer for polymer solar cells10.1016/j.polymer.2016.07.082 ↗
51. Non-fullerene acceptor with low energy loss and high external quantum efficiency: towards high performance polymer solar cells10.1039/C6TA00612D ↗
52. Fullerene derivative-doped zinc oxide nanofilm as the cathode of inverted polymer solar cells with low-bandgap polymer (PTB7-Th) for high performance10.1002/adma.201301476 ↗