Control of the coffee ring effect during R2R gravure printing for minimizing threshold voltage variation in printed carbon nanotube-based thin film transistors
Source abstract
Abstract
Devising a high-throughput additive manufacturing method (HTAM) could aid in fabricating flexible electronic devices with marginal greenhouse gas (GG) emissions and net zero by-products. A roll-to-roll (R2R) gravure printing method is considered a typical platform of HTAM to fabricate carbon nanotube-based flexible electronic devices. However, the large variation in threshold voltage (Vth) in the printed carbon nanotube devices restricts device yield, thereby limiting their practical applications. In this study, the authors would like to show a way of minimizing the variation of Vth in the R2R gravure printed carbon nanotube thin-film transistors (TFTs) by understanding how the morphology of the printed dielectric layer can be controlled during ink drying. Since the formation of an uneven morphology after drying with higher edge thickness, also known as the coffee ring effect (CRE), is one of the key factors causing the variation in Vth, regulating the morphology of the dielectric ink is vital in minimizing the Vth variation of the TFTs printed via R2R gravure. By optimizing the rheological characteristics of the dielectric ink, a homogeneous morphology was attained without CRE, consequently minimizing the Vth variation from 19.6% to 6.9%. Furthermore, the printed device stability was improved by removing the CRE and avoiding the localized bias stress during device operation. Based on this work, the yield, and the stability of R2R gravure printed devices could be improved, enabling the rapid commercialization of additively manufactured flexible devices without the emission of GG or any harmful by-products.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Nanomaterials and Printing Technologies · Thin-Film Transistor Technologies · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Fully roll-to-roll gravure printed electronics: challenges and the way to integrating logic gates
2. Roll-to-roll gravure-printed flexible perovskite solar cells using eco-friendly antisolvent bathing with wide processing window
3. Fully roll-to-roll gravure printable wireless (13.56 MHz) sensor-signage tags for smart packaging10.1038/srep05387 ↗
4. Fully roll-to-roll gravure printed 4-bit code generator based on p-type SWCNT thin-film transistors
5. Enhancing transparent thin-film transistor device performances by using a Ti-doped GaZnO channel layer10.1039/C5RA14858H ↗
6. Key issues with printed flexible thin film transistors and their application in disposable RF sensors10.1109/JPROC.2015.2410303 ↗
7. Influence of fluid physical properties on ink-jet printability10.1021/la900059m ↗
8. Fully printed flexible and disposable wireless cyclic voltammetry tag10.1038/srep08105 ↗
9. Geometry control of source/drain electrodes in organic field-effect transistors by electrohydrodynamic inkjet printing10.3390/ma13214974 ↗
10. Ink-Jet-printed organic− inorganic hybrid dielectrics for organic thin-film transistors10.1021/jp711786e ↗
11. Accuracy control for roll and sheet processed printed electronics on flexible plastic substrates10.1007/s00170-022-08717-z ↗
12. Capillary flow as the cause of ring stains from dried liquid drops10.1038/39827 ↗
13. Particle convection in an evaporating colloidal droplet10.1021/la015518a ↗
14. Self-organization of ink-jet-printed triisopropylsilylethynyl pentacene via evaporation-induced flows in a drying droplet10.1002/adfm.200700859 ↗
15. Inkjet-printed line morphologies and temperature control of the coffee ring effect10.1021/la7026847 ↗
16. Modulation of the coffee-ring effect in particle/surfactant mixtures: the importance of particle–interface interactions10.1021/acs.langmuir.5b00453 ↗
17. Ink-jet printing of polymers–from single dots to thin film libraries10.1039/b407478e ↗
18. Suppression of the coffee ring effect by hydrosoluble polymer additives10.1021/am300423p ↗
19. Overcoming the “coffee-stain” effect by compositional Marangoni-flow-assisted drop-drying10.1021/jp3009628 ↗
20. Effects of particle shape on growth dynamics at edges of evaporating drops of colloidal suspensions10.1103/PhysRevLett.110.035501 ↗
21. Rapid self-assembly of monodisperse colloidal spheres in an ink-jet printed droplet10.1021/cm035256t ↗
22. Intrinsically viscoelastic supramolecular conjugated polymer towards suppressing coffee-ring effect
23. Scalability of carbon-nanotube-based thin film transistors for flexible electronic devices manufactured using an all roll-to-roll gravure printing system10.1038/srep14459 ↗
24. Fully R2R-printed carbon-nanotube-based limitless length of flexible active-matrix for electrophoretic display application10.1002/aelm.201901431 ↗
25. A fully roll-to-roll gravure-printed carbon nanotube-based active matrix for multi-touch sensors10.1038/srep17707 ↗
26. The first step towards a R2R printing foundry via a complementary design rule in physical dimension for fabricating flexible 4-bit code generator
27. Suppression of threshold voltage variability in MOSFETs by adjustment of ion implantation parameters10.1016/j.spmi.2017.10.034 ↗
28. Scalability of roll-to-roll gravure-printed electrodes on plastic foils10.1109/TEPM.2010.2057512 ↗
29. Characterization of silver nanoparticle inks toward stable roll-to-roll gravure printing
30. Bridging R2R printed wireless 1 bit-code generator with an electrophoretic QR code acting as WORM for NFC carrier enabled authentication label
31. History and challenges of barium titanate: Part II10.2298/SOS0803235V ↗
32. Barium titanate-enhanced hexagonal boron nitride inks for printable high-performance dielectrics10.1088/1361-6528/ac553f ↗
33. Determining dielectric constants using a parallel plate capacitor10.1119/1.1794757 ↗
34. Understanding, optimizing, and utilizing nonideal transistors based on organic or organic hybrid semiconductors
35. Multimode transistors and neural networks based on ion-dynamic capacitance
36. Printed four key-device units for unified platform of wireless anti-counterfeiting label to bridge in blockchain10.1002/admt.202100969 ↗
37. Relationship between printability and rheological behavior of ink-jet conductive inks10.1016/j.ceramint.2013.02.039 ↗
38. Demonstration of upper and lower Newtonian fluid behaviour in a pseudoplastic fluid10.1038/265126a0 ↗
39. Experimental investigations of the viscosity of nanofluids at low temperatures10.1016/j.apenergy.2011.12.101 ↗
40. Natural convection within a non-uniformly heated cavity partly filled with a shear-thinning nanofluid and partly with air10.1016/j.jnnfm.2021.104490 ↗
41. Kitsomboonloha · 2015
42. The influence of ink viscosity, water and fabric construction on the quality of ink-jet printed polyester10.1111/cote.12439 ↗
43. McKinley · 2005
44. How to extract the Newtonian viscosity from capillary breakup measurements in a filament rheometer10.1122/1.551105 ↗
45. Pinch-off dynamics and dripping-onto-substrate (DoS) rheometry of complex fluids10.1039/C6LC01155A ↗
46. Control of the drying patterns for complex colloidal solutions and their applications10.3390/nano12152600 ↗
47. Wetting and drying of colloidal droplets: physics and pattern formation
48. Rate-dependent interface capture beyond the coffee-ring effect
49. Analysis on the ink transfer mechanism in R2R application10.1007/s12206-009-1146-1 ↗
50. Profile control of inkjet printed silver electrodes and their application to organic transistors10.1021/am400632s ↗
51. Limits of performance gain of aligned CNT over randomized network: theoretical predictions and experimental validation10.1109/LED.2007.898256 ↗
52. Bias stress stability of indium gallium zinc oxide channel based transparent thin film transistors10.1063/1.2824758 ↗
53. Bias stress induced threshold voltage shift in pentacene thin-film transistors10.1143/JJAP.45.L1127 ↗
54. Turnaround phenomenon of threshold voltage shifts in amorphous silicon thin film transistors under negative bias stress10.1143/JJAP.39.5763 ↗
55. Drain-bias dependence of threshold voltage stability of amorphous silicon TFTs10.1109/LED.2004.825154 ↗
56. Improving bias-stress stability of p-type organic field-effect transistors by constructing an electron injection barrier at the drain electrode/semiconductor interfaces10.1021/acsami.0c12188 ↗
57. Comprehensive analysis of two-dimensional charge transport mechanism in thin-film transistors based on random networks of single-wall carbon nanotubes using transient measurements10.1007/s12274-021-3697-0 ↗
58. Reduced gate-leakage current and charge trapping characteristics of dysprosium-incorporated HfO2 gate-oxide n-MOS devices10.1109/TED.2010.2091453 ↗
59. Zhu · 2021 · 1
60. Modeling early breakdown failures of gate oxide in SiC power MOSFETs10.1109/TED.2016.2586483 ↗
61. Aichinger · 2020 · 1