journal article·2017-11Open access

Donor–acceptor–acceptor-based non-fullerene acceptors comprising terminal chromen-2-one functionality for efficient bulk-heterojunction devices

Pedada Srinivasa Rao, Akhil Gupta, Sidhanath V. Bhosale, Ante Bilic, Wanchun Xiang, Richard A. Evans, Sheshanath V. Bhosale

Dyes and Pigments· Volume 146

Abstract

Abstract Two simple semiconducting donor–acceptor–acceptor (D–A 1 –A) modular, small molecule, non-fullerene electron acceptors, 2-(4-(diphenylamino)phenyl)-3-(4-((2-oxo-2 H -chromen-3-yl)ethynyl)phenyl)buta-1,3-diene-1,1,4,4-tetracarbonitrile ( P2 ) and 2-(4-(3,3-dicyano-1-(4-(diphenylamino)phenyl)-2-(4-((2-oxo-2 H -chromen-3-yl)ethynyl)phenyl)allylidene)cyclohexa-2,5-dien-1-ylidene)malononitrile ( P3 ), were designed, synthesized and characterized for application in solution-processable bulk-heterojunction solar cells. The optoelectronic and photovoltaic properties of P2 and P3 were directly compared with those of a structural analogue, 3-((4-((4-(diphenylamino)phenyl)ethynyl)phenyl)ethynyl)-2 H -chromen-2-one ( P1 ), which was designed based on a D–A format. All of these new materials comprised an electron rich triphenylamine (TPA) donor core (D) and electron deficient chromen-2-one terminal core (A). In the simple D–A system, TPA and chromenone were the terminal functionalities, whereas in the D–A 1 –A system, tetracyanoethylene (TCNE) and tetracyanoquinodimethane (TCNQ) derived functionalities were incorporated as A 1 units by keeping the D/A units constant. The inclusion of A 1 was primarily done to induce cross-conjugation within the molecular backbone and hence to generate low band gap targets. The physical and optoelectronic properties were characterized by ultraviolet–visible (UV–Vis), thermogravimetric analysis, photo-electron spectroscopy in air and cyclic voltammetry. These new materials exhibited broadened absorption spectra, for instance panchromatic absorbance in case of P3 , excellent solubility and thermal stability, and energy levels matching those of the conventional and routinely used donor polymer poly(3-hexyl thiophene) (P3HT). Solution-processable bulk-heterojunction devices were fabricated with P1 , P2 and P3 as non-fullerene electron acceptors. Studies on the photovoltaic properties revealed that the best P3HT: P3 -based device showed an impressive enhanced power conversion efficiency of 4.21%, an increase of around two-fold with respect to the efficiency of the best P3HT: P1 -based device (2.28%). Our results clearly demonstrate that the D–A 1 –A type small molecules are promising non-fullerene electron acceptors in the research field of organic solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Recherches sur les effets de la radiation chimique de la lumiere solaire au moyen des courants electriques
2. Two-layer organic photovoltaic cell10.1063/1.96937 ↗
3. Polymer photovoltiac cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
4. Cyanomethylbenzoic acid: an acceptor for donor–π–acceptor chromophores used in dye-sensitized solar cells10.1002/cssc.201200636 ↗
5. 25th anniversary article: bulk heterojunction solar cells: understanding the mechanism of operation10.1002/adma.201304373 ↗
6. Bulk heterojunction solar cells: morphology and performance relationships10.1021/cr400353v ↗
7. Small molecule semiconductors for high-efficiency organic photovoltaics10.1039/c2cs15313k ↗
8. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
9. Single-junction polymer solar cells exceeding 10% power conversion efficiency10.1002/adma.201404535 ↗
10. A series of simple oligomer-like small molecules based on oligothiophenes for solution-processed solar cells with high efficiency10.1021/jacs.5b00305 ↗
11. Efficient organic solar cells with helical perylene diimide electron acceptors10.1021/ja5092613 ↗
12. Fine-tuning the 3D structure of nonfullerene electron acceptors toward high-performance polymer solar cells10.1002/adma.201500577 ↗
13. Electron-accepting conjugated materials based on 2-vinyl-4, 5-dicyanoimidazoles for application in organic electronics10.1021/jo802720m ↗
14. Fullerene-free polymer solar cells with over 11% efficiency and excellent thermal stability10.1002/adma.201600281 ↗
15. Energy-level modulation of small-molecule electron acceptors to achieve over 12% efficiency in polymer solar cells10.1002/adma.201602776 ↗
16. High-performance fullerene-free polymer solar cells with 6.31% efficiency10.1039/C4EE03424D ↗
17. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
18. Star-shaped isoindigo-based small molecules as potential non-fullerene acceptors in bulk heterojunction solar cells10.1039/C5NJ01893E ↗
19. Pyrene terminal functionalized perylene diimide as non-fullerene acceptors for bulk heterojunction solar cells10.1039/C5RA13188J ↗
20. Synthesis and photovoltaic properties of A–D–A type non-fullerene acceptors containing isoindigo terminal units10.1039/C5RA23321F ↗
21. Nonfullerene polymer solar cells with 8.5% efficiency enabled by a new highly twisted electron acceptor dimer10.1002/adma.201503801 ↗
22. Helicity multiplexed broadband metasurface holograms
23. A spirobifluorene and diketopyrrolopyrrole moieties based non-fullerene acceptor for efficient and thermally stable polymer solar cells with high open-circuit voltage10.1039/C5EE03481G ↗
24. A non-fullerene electron acceptor based on fluorene and diketopyrrolopyrrole building blocks for solution-processable organic solar cells with an impressive open-circuit voltage10.1039/C4CP03727H ↗
25. A diketopyrrolopyrrole and benzothiadiazole based small molecule electron acceptor: design, synthesis, characterization and photovoltaic properties10.1039/C4RA09668A ↗
26. Conjoint use of dibenzosilole and indan-1, 3-dione functionalities to prepare an efficient non-fullerene acceptor for solution-processable bulk-heterojunction solar cells10.1002/ajoc.201500207 ↗
27. An H-shaped, small molecular non-fullerene acceptor for efficient organic solar cells with an impressive open-circuit voltage of 1.17 V10.1039/C7QM00084G ↗
28. Small molecular non-fullerene acceptors based on naphthalenediimide and benzoisoquinoline-dione functionalities for efficient bulk-heterojunction devices10.1016/j.dyepig.2017.04.014 ↗
29. Non-fullerene acceptors based on central naphthalene diimide flanked by rhodanine or 1,3-indanedione10.1039/C7CC03122J ↗
30. Recent progress in non-fullerene small molecule acceptors in organic solar cells10.1039/C6TC05066B ↗
31. A perylene diimide (PDI)-based small molecule with tetrahedral configuration as a non-fullerene acceptor for organic solar cells10.1039/C5TC00865D ↗
32. Novel donor–acceptor polymers based on 7-perfluorophenyl-6H-[1,2,5]thiadiazole[3,4-g]benzoimidazole for bulk heterojunction solar cells10.1039/C5RA05849J ↗
33. Quinoxaline-functionalized C60 derivatives as electron acceptors in organic solar cells10.1039/C4RA02911A ↗
34. Synthesis and photovoltaic properties of novel C60 bisadducts based on benzo[2,1,3]-thiadiazole10.1016/j.tet.2014.01.026 ↗
35. A push–pull macrocycle with both linearly conjugated and cross-conjugated bridges10.1021/ol401697d ↗
36. Oligomeric and polymeric systems with a cross-conjugated π-framework10.1021/cr0505573 ↗
37. Cross-conjugated cruciform fluorophores10.1021/ar900218d ↗
38. Absorption enhancement of oligothiophene dyes through the use of a cyanopyridone acceptor group in solution-processed organic solar cells10.1039/c2cc17325e ↗
39. The effect of direct amine substituted push–pull oligothiophene chromophores on dye-sensitized and bulk heterojunction solar cells performance10.1016/j.tet.2013.02.040 ↗
40. Enhanced photovoltaic efficiency via light-triggered self-assembly10.1039/c3cc43841d ↗
41. Molecular engineering for panchromatic absorbing oligothiophene donor–π–acceptor organic semiconductors10.1016/j.tet.2012.09.009 ↗
42. A non-fullerene electron acceptor based on central carbazole and terminal diketopyrrolopyrrole functionalities for efficient, reproducible and solution-processable bulk-heterojunction devices10.1039/C6RA01558A ↗
43. Alternated stacks of nonpolar oligo (p-phenyleneethynylene)-BODIPY systems10.1002/chem.201203279 ↗
44. Preparation of a rigid macrocycle with two exotopic phenanthroline binding sites10.1055/s-1999-2714 ↗
45. Frisch · 2013