Influence of the terminal group on optoelectronic properties of fused-ring nonfullerene acceptors with ethylhexyl side chain
Source abstract
Abstract
Abstract Three fused-ring nonfullerene electron acceptors are designed and synthesized by combining side chain effect and terminal group modification. The 2-ethylhexyl substituent is employed to replace the commonly used n-hexyl or n-hexylphenyl side chains. Three acceptor units, 2-(3-oxo-2,3-dihydroinden-1-ylidene) malononitrile (IC), 2-(6-oxo-5,6-dihydro-4H-cyclopenta [c]thiophen-4-ylidene) malononitrile (CPTCN), and 2-(5,6-dichloro-3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile (IC–2Cl) are used as the terminal groups and the three fused-ring nonfullerene acceptors, IDTC8-IC, IDTC8-Th, and IDTC8-4Cl are developed, respectively. The thermal, photophysical, electrochemical and photovoltaic properties of the three acceptors are systematically studied in view of the influence of the side chain and the terminal group. The three acceptors exhibit strong absorption ranging from 500 nm to 720 nm in solution with high molar extinction coefficients. The large bandgap polymer PM6 is chosen as the donor to blend with the acceptors, due to the complementary absorption bands and well-matched energy levels. The optimized organic solar cell based on PM6:IDTC8-IC exhibits a power conversion efficiency (PCE) of 8.56% with an open-circuit voltage (VOC) of 0.98 V, a short-circuit current density (JSC) of 13.93 mA cm−2, and a fill factor (FF) of 62.42%. The PM6:IDTC8-4Cl device demonstrates the best performance with a PCE of 9.79%, a VOC of 0.82 V, a JSC of 17.40 mA cm−2, and a FF of 68.67%. The impacts of carrier mobility, film morphology, and molecular packing properties of the blend films on photovoltaic performances are systematically investigated. The results imply that the synergistic effect of alkyl chains on the central core and modification of the terminal groups yields improved photovoltaic performance of nonfullerene acceptors.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Polymer photovoltaic cells enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
2. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200903697 ↗
3. Polymer solar cells10.1038/nphoton.2012.11 ↗
4. Non-fullerene acceptors for organic photovoltaics: an emerging horizon10.1039/C4MH00042K ↗
5. Trends in the electronic and geometric structure of non-fullerene based acceptors for organic solar cells10.1039/C6EE03654F ↗
6. Non-fullerene small molecule electron acceptors for high-performance organic solar cells10.1016/j.jechem.2017.11.028 ↗
7. Organic solar cells based on non-fullerene acceptors10.1038/nmat5063 ↗
8. Nonfullerene acceptor molecules for bulk heterojunction organic solar cells10.1021/acs.chemrev.7b00535 ↗
9. A tetraphenylethylene core-based 3D structure small molecular acceptor enabling efficient non-fullerene organic solar cells10.1002/adma.201404152 ↗
10. Non-fullerene-acceptor-based bulk-heterojunction organic solar cells with efficiency over 7%10.1021/jacs.5b06414 ↗
11. Design and synthesis of a low bandgap small molecule acceptor for efficient polymer solar cells10.1002/adma.201602642 ↗
12. High-performance electron acceptor with thienyl side chains for organic photovoltaics10.1021/jacs.6b02004 ↗
13. Side-chain isomerization on an n-type organic semiconductor ITIC acceptor makes 11.77% high efficiency polymer solar cells10.1021/jacs.6b09110 ↗
14. Preparation of non-fullerene acceptors with a multi-asymmetric configuration in a one-pot reaction for organic solar cells10.1039/D0TC04749J ↗
15. Integrated molecular, interfacial, and device engineering towards high-performance non-fullerene based organic solar cells10.1002/adma.201401992 ↗
16. Low-bandgap small molecules as non-fullerene electron acceptors composed of benzothiadiazole and diketopyrrolopyrrole for all organic solar cells10.1021/acs.chemmater.5b02480 ↗
17. High performance organic solar cells based on a twisted bay-substituted tetraphenyl functionalized perylenediimide electron acceptor10.1002/aenm.201500032 ↗
18. A high efficiency nonfullerene organic solar cell with optimized crystalline organizations10.1002/adma.201504091 ↗
19. High-performance solution-processed non-fullerene organic solar cells based on selenophene-containing perylene bisimide acceptor10.1021/jacs.5b11149 ↗
20. A spirobifluorene and diketopyrrolopyrrole moieties based non-fullerene acceptor for efficient and thermally stable polymer solar cells with high open-circuit voltage10.1039/C5EE03481G ↗
21. Tetraphenylethylene vs triphenylethylene core-based perylene diimide acceptor for non-fullerene organic solar cells10.1016/j.dyepig.2020.108813 ↗
22. Fused perylenediimide dimer as nonfullerene acceptor for high-performance organic solar cells10.1016/j.dyepig.2021.109269 ↗
23. Non-fullerene acceptors for organic solar cells10.1038/natrevmats.2018.3 ↗
24. Molecular engineering of central fused-ring cores of non-fullerene acceptors for high-efficiency organic solar cells10.1039/C8TA12465E ↗
25. Nonfullerene all-small-molecule organic solar cells10.1021/acsenergylett.9b00528 ↗
26. Recent progress in molecular design of fused ring electron acceptors for organic solar cells10.1002/smll.201900134 ↗
27. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
28. Structure evolution of oligomer fused-ring electron acceptors toward high efficiency of as-cast polymer solar cells10.1002/aenm.201600854 ↗
29. High-efficiency and air-stable P3HT-based polymer solar cells with a new non-fullerene acceptor10.1038/ncomms11585 ↗
30. Mapping polymer donors toward high-efficiency fullerene free organic solar cells10.1002/adma.201604155 ↗
31. Constructing a strongly absorbing low-bandgap polymer acceptor for high-performance all-polymer solar cells10.1002/anie.201707678 ↗
32. A highly crystalline fused-ring n-type small molecule for non-fullerene acceptor based organic solar cells and field-effect transistors10.1002/adfm.201802895 ↗
33. Balanced partnership between donor and acceptor components in nonfullerene organic solar cells with >12% efficiency10.1002/adma.201706363 ↗
34. All-small-molecule organic solar cells based on pentathiophene donor and alkylated indacenodithiophene-based acceptors with efficiency over 8%10.1021/acsaem.8b00205 ↗
35. A facile planar fused-ring electron acceptor for as-cast polymer solar cells with 8.71% efficiency10.1021/jacs.6b00853 ↗
36. Influence of alkyl chains on photovoltaic properties of 3D rylene propeller electron acceptors10.1039/C6TA09049D ↗
37. Enhancing performance of non-fullerene organic solar cells via side chain engineering of fused-ring electron acceptors10.1016/j.dyepig.2016.12.065 ↗
38. Side-chain impact on molecular orientation of organic semiconductor acceptors: high performance nonfullerene polymer solar cells with thick active layer over 400 nm10.1002/aenm.201800856 ↗
39. Improving molecular planarity by changing alkyl chain position enables 12.3% efficiency all‐small‐molecule organic solar cells with enhanced carrier lifetime and reduced recombination10.1002/solr.201900326 ↗
40. Bandgap tailored nonfullerene acceptors for low-energy-loss near-infrared organic photovoltaics10.1021/acsmaterialslett.9b00512 ↗
41. Effects of alkoxylation position on fused-ring electron acceptors10.1039/D0TC02158J ↗
42. Synergistic effect of alkyl chain and chlorination engineering on high-performance nonfullerene acceptors10.1021/acsami.0c07856 ↗
43. Alkyl chain engineering of chlorinated acceptors for elevated solar conversion10.1039/C9TA12558B ↗
44. Altering alkyl-chains branching positions for boosting the performance of small-molecule acceptors for highly efficient nonfullerene organic solar cells10.1007/s11426-019-9670-2 ↗
45. Insight into the effects of alkoxy side chain position in nonfullerene electron acceptors on the morphological stability of organic solar cells10.1016/j.dyepig.2020.108562 ↗
46. Small-molecule acceptors with long alkyl chains for high-performance as-cast nonfullerene organic solar cells10.1016/j.orgel.2021.106167 ↗
47. Fluorination-enabled optimal morphology leads to over 11% efficiency for inverted small-molecule organic solar cells10.1038/ncomms13740 ↗
48. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
49. Fused tris(thienothiophene)-based electron acceptor with strong near-infrared absorption for high-performance as-cast solar cells10.1002/adma.201705969 ↗
50. Over 14% efficiency in organic solar cells enabled by chlorinated nonfullerene small-molecule acceptors10.1002/adma.201800613 ↗
51. Combining chlorination and sulfuration strategies for high-performance all-small-molecule organic solar cells10.1016/j.jechem.2020.04.041 ↗
52. Synergistic effect of the selenophene-containing central core and the regioisomeric monochlorinated terminals on the molecular packing, crystallinity, film morphology, and photovoltaic performance of selenophene-based nonfullerene acceptors10.1039/D0TC05261B ↗
53. Nonfullerene acceptors from thieno[3,2-b]thiophene-fused naphthalene donor core with six-member-ring connection for efficient organic solar cells10.1016/j.dyepig.2020.108892 ↗
54. Achieving highly efficient nonfullerene organic solar cells with improved intermolecular interaction and open-circuit voltage10.1002/adma.201700254 ↗
55. Fine-tuned photoactive and interconnection layers for achieving over 13% efficiency in a fullerene-free tandem organic solar cell10.1021/jacs.7b01493 ↗
56. A novel thiophene-fused ending group enabling an excellent small molecule acceptor for high-performance fullerene-free polymer solar cells with 11.8% efficiency10.1002/solr.201700044 ↗
57. Achieving over 10% efficiency in a new acceptor ITTC and its blends with hexafluoroquinoxaline based polymers10.1039/C7TA02486J ↗
58. Fine-tuning of molecular packing and energy level through methyl substitution enabling excellent small molecule acceptors for nonfullerene polymer solar cells with efficiency up to 12.54%10.1002/adma.201706124 ↗
59. A new non-fullerene acceptor based on the combination of a heptacyclic benzothiadiazole unit and a thiophene-fused end group achieving over 13% efficiency10.1039/C9CP05015A ↗
60. Subtle polymer donor and molecular acceptor design enable efficient polymer solar cells with a very small energy loss10.1002/adfm.201907570 ↗
61. Optimized fibril network morphology by precise side-chain engineering to achieve high-performance bulk-heterojunction organic solar cells10.1002/adma.201707353 ↗
62. A large-bandgap conjugated polymer for versatile photovoltaic applications with high performance10.1002/adma.201502110 ↗
63. Toward over 15% power conversion efficiency for organic solar cells: current status and perspectives10.1002/smtd.201700258 ↗
64. Modulation of the molecular orientation at the bulk heterojunction interface via tuning the small molecular donor-nonfullerene acceptor interactions10.1021/acsami.8b08608 ↗
65. Non-fullerene acceptors based on fused-ring oligomers for efficient polymer solar cells via complementary light-absorption10.1039/C7TA06631G ↗