Modulation of energy levels and vertical charge transport in polythiophene through copolymerization of non-fluorinated and fluorinated units for organic indoor photovoltaics
Source abstract
Abstract
Abstract Organic indoor photovoltaics (OIPVs) for the development of a wireless power supplier that allows the portable operation of Internet-of-things and low-energy consumption devices have received tremendous interest. Particularly, polythiophene represented by poly(3-hexylthiophene) has been considered as a promising photoactive material for OIPVs owing to their desirable optoelectrical properties and power conversion efficiencies (PCEs) that exceed Si-based PVs under low-intensity illumination. However, the polythiophene-based OIPVs suffer from an inadequate charge transporting ability in the out-of-plane direction and a low open-circuit voltage (VOC), which currently hinder the further improvement of OIPVs. Herein, we designed and synthesized a new polythiophene derivative by combining fluorination and random copolymerization strategies. The optimized polymer obtained by tuning the ratio of fluorinated and non-fluorinated bi-thiophene units showed an increased population of face-on oriented crystallites, a denser packing, and a deeper highest occupied molecule orbital energy level compared with its homopolymer analogue. The optimized polymer was also revealed to provide improved vertical charge transport than homopolymer analogue. As a result, when fabricated using the phenyl-C71-butyric acid methyl ester as an electron-acceptor, the OIPVs with the optimized polymer showed high PCEs up to 13.4% with VOC of 0.68 V under 1000 lux white light-emitting diode illumination, which were improved values compared with the efficiencies observed in the devices with homopolymer (PCE = 5.6% and VOC = 0.57 V).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Intrinsically stable organic solar cells under high-intensity illumination10.1038/s41586-019-1544-1 ↗
2. High-efficiency organic solar cells with low non-radiative recombination loss and low energetic disorder10.1038/s41566-019-0573-5 ↗
3. It's time to focus on organic solar cell stability10.1038/s41560-020-00732-2 ↗
4. Lead-Free perovskite-inspired absorbers for indoor photovoltaics
5. n-Type molecular photovoltaic materials: design strategies and device applications10.1021/jacs.0c04084 ↗
6. Technology and market perspective for indoor photovoltaic cells10.1016/j.joule.2019.03.026 ↗
7. All-polymer indoor photovoltaics with high open-circuit voltage10.1039/C9TA10040G ↗
8. Transparent thin-film silicon solar cells for indoor light harvesting with conversion efficiencies of 36% without photodegradation10.1021/acsami.0c04517 ↗
9. You · Adv Funct Mater · 2019 · 29
10. Single‐junction binary‐blend nonfullerene polymer solar cells with 12.1% efficiency
11. Noncovalent Se···O conformational locks for constructing high‐performing optoelectronic conjugated polymers10.1002/adma.201606025 ↗
12. Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages10.1038/s41467-019-10351-5 ↗
13. Achieving fast charge separation and low nonradiative recombination loss by rational fluorination for high‐efficiency polymer solar cells10.1002/adma.201905480 ↗
14. High‐performance all‐polymer solar cells enabled by an n‐type polymer based on a fluorinated imide‐functionalized arene10.1002/adma.201807220 ↗
15. Fluorination enhances NIR‐II fluorescence of polymer dots for quantitative brain tumor imaging10.1002/anie.202007886 ↗
16. Sequentially fluorinated PTAA polymers for enhancing VOC of high‐performance perovskite solar cells10.1002/aenm.201801668 ↗
17. Feasible D1–A–D2–A random copolymers for simultaneous high-performance fullerene and nonfullerene solar cells10.1002/aenm.201702166 ↗
18. High-performance all-polymer solar cells: synthesis of polymer acceptor by a random ternary copolymerization strategy10.1002/anie.202005357 ↗
19. The effect of irregularity from asymmetric random π-conjugated polymers on the photovoltaic performance of fullerene-free organic solar cells10.1039/C9PY00461K ↗
20. Energy level modulation of donor–acceptor alternating random conjugated copolymers for achieving high-performance polymer solar cells10.1039/C9TC05601G ↗
21. Random copolymerization of polythiophene for simultaneous enhancement of in-plane and out-of-plane charge transport for organic transistors and perovskite solar cells10.1002/er.6293 ↗
22. Amidation, esterification, and thioesterification of a carboxyl‐functionalized covalent organic framework10.1002/anie.201912579 ↗
23. Synthesis of α,β-unsaturated esters of perfluoropolyalkylethers (PFPAEs) based on hexafluoropropylene oxide units for photopolymerization10.1039/C8RA06354K ↗
24. A monothiophene unit incorporating both fluoro and ester substitution enabling high-performance donor polymers for non-fullerene solar cells with 16.4% efficiency10.1039/C9EE01890E ↗
25. Effect of linear side-chain length on the photovoltaic performance of benzodithiophene-alt-dicarboxylic ester terthiophene polymers10.1039/C9NJ02484K ↗
26. Toward high-efficiency, hysteresis-less, stable perovskite solar cells: unusual doping of a hole-transporting material using a fluorine-containing hydrophobic Lewis acid10.1039/C8EE00036K ↗
27. The introduction of fluorine and sulfur atoms into benzotriazole‐based p‐type polymers to match with a benzotriazole‐containing n‐type small molecule: “the same‐acceptor‐strategy” to realize high open‐circuit voltage10.1002/aenm.201801582 ↗
28. Impact of side-chain fluorination on photovoltaic properties: fine tuning of the microstructure and energy levels of 2D-conjugated copolymers10.1039/C7TA04098A ↗
29. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
30. Organic and solution-processed tandem solar cells with 17.3% efficiency10.1126/science.aat2612 ↗
31. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
32. Exploiting noncovalently conformational locking as a design strategy for high performance fused-ring electron acceptor used in polymer solar cells10.1021/jacs.7b00566 ↗
33. Characterization of hydrogen bonding formation and breaking in semiconducting polymers under mechanical strain10.1021/acs.macromol.9b00145 ↗
34. A wide band gap polymer with a deep highest occupied molecular orbital level enables 14.2% efficiency in polymer solar cells10.1021/jacs.8b02695 ↗
35. Perovskite solar cells: donor–acceptor type dopant‐free, polymeric hole transport material for planar perovskite solar cells (19.8%)
36. Effect of molecular orientation of donor polymers on charge generation and photovoltaic properties in bulk heterojunction all‐polymer solar cells10.1002/aenm.201601365 ↗
37. A thienoisoindigo-naphthalene polymer with ultrahigh mobility of 14.4 cm2/V·s that substantially exceeds benchmark values for amorphous silicon semiconductors10.1021/ja504537v ↗
38. Polymer electrolyte blend gate dielectrics for high-performance ultrathin organic transistors: toward favorable polymer blend miscibility and reliability10.1021/acsami.9b03999 ↗
39. Ultrahigh mobility in solution‐processed solid‐state electrolyte‐gated transistors10.1002/adma.201605685 ↗
40. Selective Soxhlets extraction to enhance solubility of newly-synthesized poly(indoloindole-selenophene vinylene selenophene) donor for photovoltaic applications10.1186/s40580-020-0219-9 ↗
41. Double-gate thin film transistor with suspended-gate applicable to tactile force sensor10.1186/s40580-020-00240-9 ↗
42. Toward efficient thick active PTB7 photovoltaic layers using diphenyl ether as a solvent additive10.1021/acsami.6b03453 ↗
43. Key tradeoffs limiting the performance of organic photovoltaics10.1002/aenm.201703551 ↗
44. Measuring the competition between bimolecular charge recombination and charge transport in organic solar cells under operating conditions10.1039/C8EE01559G ↗
45. Every atom counts: elucidating the fundamental impact of structural Change in conjugated polymers for organic photovoltaics10.1021/acs.chemmater.8b00590 ↗
46. White light emitting diode based on purely organic fluorescent to modern thermally activated delayed fluorescence (TADF) and perovskite materials10.1186/s40580-019-0201-6 ↗
47. 1 cm2 organic photovoltaic cells for indoor application with over 20% efficiency10.1002/adma.201904512 ↗