journal article·2021-07Open access

Molecular packing modulation enabling optimized blend morphology and efficient all small molecule organic solar cells

Yuwei Duan, Xiaopeng Xu, Liyang Yu, Ying Li, Ruipeng Li, Qiang Peng

Dyes and Pigments· Volume 191

Abstract

Abstract The molecular planarity of a small molecule donor is one of the key factors affecting its molecular packing behavior, the morphology of the related active blend and thus the photovoltaic properties of all small molecule organic solar cells (ASM-OSCs). In this contribution, a series of new benzodithiophene (BDT)-based A-π-D-π-A type small molecules were developed, namely SD1, SD2 and SD3, by combining the chemical modification of side chain (sulfuration), π-bridge (alkoxy groups introducing) and end group (different type or different alkyl chain). The sulfuration of the BDT side chains and introducing alkoxy group to the π-bridge could induce intermolecular S⋯S and intramolecular S⋯O non-covalent interactions for higher planarity of these small molecules. The rhodanine and cyanoacetate end groups showed less effect on the optical and electronic properties but significantly affected the molecular packing behavior and blend morphology. From SD1:Y6-T to SD2:Y6-T and SD3:Y6-T, the face-to-face packing was gradually reduced, while the face-to-edge packing was increased, which resulted in lowered exciton dissociation efficiency, further decreased the device performance. SD1:Y6-T blend exhibited more favorable face-to-face packing and ideal morphology for efficient charge dissociation and transport, contributing to a champion PCE of 10.12%. This work provided a deep insight of the donor and acceptor packing behavior effect on the photovoltaic property by molecular design.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Effect of side-chain modification on the active layer morphology and photovoltaic performance of liquid crystalline molecular materials10.1021/acsami.0c20389 ↗
2. Emerging approaches in enhancing the efficiency and stability in non‐fullerene organic solar cells10.1002/aenm.202002746 ↗
3. Recent advances in wide bandgap polymer donors and their applications in organic solar cells10.1002/cjoc.202000451 ↗
4. Improving open-circuit voltage by a chlorinated polymer donor endows binary organic solar cells efficiencies over 17%10.1007/s11426-019-9669-3 ↗
5. Highly efficient non-fullerene organic solar cells enabled by a delayed processing method using a non-halogenated solvent10.1039/D0EE02034F ↗
6. Fine-tuning of side-chain orientations on nonfullerene acceptors enables organic solar cells with 17.7% efficiency10.1039/D0EE03506H ↗
7. Single-layered organic photovoltaics with double cascading charge transport pathways: 18% efficiencies10.1038/s41467-020-20580-8 ↗
8. 17.1%-efficient eco-compatible organic solar cells from a dissymmetric 3D network acceptor10.1002/anie.202013053 ↗
9. 18% efficiency organic solar cells10.1016/j.scib.2020.01.001 ↗
10. Fine-tuning energy levels via asymmetric end groups enables polymer solar cells with efficiencies over 17%10.1016/j.joule.2020.03.023 ↗
11. Low-bandgap non-fullerene acceptors enabling high-performance organic solar cells10.1021/acsenergylett.0c02384 ↗
12. n-Type molecular photovoltaic materials: design strategies and device applications10.1021/jacs.0c04084 ↗
13. New phase for organic solar cell research: emergence of Y-series electron acceptors and their perspectives10.1021/acsenergylett.0c00537 ↗
14. The recent progress of wide bandgap donor polymers towards non-fullerene organic solar cells10.1016/j.cclet.2019.02.030 ↗
15. 14.46% efficiency small molecule organic photovoltaics enabled by the well trade-off between phase separation and photon harvesting10.1016/j.jechem.2020.09.025 ↗
16. Modulation of donor alkyl terminal chains with the shifting branching point leads to the optimized morphology and efficient all-small-molecule organic solar cells10.1021/acsami.0c03977 ↗
17. Over 15% efficiency all-small-molecule organic solar cells enabled by a C-shaped small molecule donor with tailorable asymmetric backbone10.1016/j.nanoen.2020.105612 ↗
18. Nonfullerene all-small-molecule organic solar cells10.1021/acsenergylett.9b00528 ↗
19. Moving alkyl-chain branching point induced a hierarchical morphology for efficient all-small-molecule organic solar cells10.1002/adfm.202005426 ↗
20. A novel wide-bandgap small molecule donor for high efficiency all-small-molecule organic solar cells with small non-radiative energy losses10.1039/C9EE04199K ↗
21. High-efficiency all-small-molecule organic solar cells based on an organic molecule donor with an asymmetric thieno[2,3-f]benzofuran unit10.1007/s11426-020-9753-x ↗
22. Highly efficient all-small-molecule organic solar cells with appropriate active layer morphology by side chain engineering of donor molecules and thermal annealing10.1002/adma.201908373 ↗
23. 15.3% efficiency all-small-molecule organic solar cells enabled by symmetric phenyl substitution10.1007/s40843-020-1269-9 ↗
24. Side-chain engineering of benzodithiophene-bridged dimeric porphyrin donors for all-small-molecule organic solar cells10.1021/acsami.0c11410 ↗
25. Solution-processed organic solar cells with 9.8% efficiency based on a new small molecule containing a 2D fluorinated benzodithiophene central unit10.1002/aelm.201600061 ↗
26. Synergistic effect of halogenation on molecular energy level and photovoltaic performance modulations of highly efficient small molecular materials10.1016/j.nanoen.2017.08.027 ↗
27. 13.34 % efficiency non-fullerene all-small-molecule organic solar cells enabled by modulating the crystallinity of donors via a fluorination strategy10.1002/anie.201910297 ↗
28. Weak makes it powerful: the role of cognate small molecules as an alloy donor in 2D/1A ternary fullerene solar cells for finely tuned hierarchical morphology in thick active layers10.1002/smtd.201900766 ↗
29. Precise control of phase separation enables 12% efficiency in all small molecule solar cells10.1002/aenm.202001589 ↗
30. Highly efficient halogen-free solvent processed small-molecule organic solar cells enabled by material design and device engineering10.1039/C7EE00805H ↗
31. Effective molecular engineering approach for employing a halogen-free solvent for the fabrication of solution-processed small-molecule solar cells10.1021/acsami.8b14888 ↗
32. High-efficiency all-small-molecule organic solar cells based on an organic molecule donor with alkylsilyl-thienyl conjugated side chains10.1002/adma.201706361 ↗
33. Benzodithiophene-based small-molecule donors for next-generation all-small-molecule organic photovoltaics10.1016/j.matt.2020.09.001 ↗
34. High-performance small molecule via tailoring intermolecular interactions and its application in large-area organic photovoltaic modules10.1002/aenm.201600228 ↗
35. Solution-processed and high-performance organic solar cells using small molecules with a benzodithiophene unit10.1021/ja403318y ↗
36. High-performance organic solar cells based on a small molecule with alkylthio-thienyl-conjugated side chains without extra treatments10.1002/adma.201503815 ↗
37. 13.7% efficiency small-molecule solar cells enabled by a combination of material and morphology optimization10.1002/adma.201904283 ↗
38. Improved efficiency in all-small-molecule organic solar cells with ternary blend of nonfullerene acceptor and chlorinated and nonchlorinated donors10.1021/acsami.9b16900 ↗
39. All-small-molecule organic solar cells with an ordered liquid crystalline donor10.1016/j.joule.2019.09.009 ↗
40. Terminal group engineering for small-molecule donors boosts the performance of nonfullerene organic solar cells10.1039/C8TA11420J ↗
41. Fluorination-enabled optimal morphology leads to over 11% efficiency for inverted small-molecule organic solar cells10.1038/ncomms13740 ↗
42. Small molecule donors with different conjugated π linking bridges: synthesis and photovoltaic properties10.1088/1674-4926/41/12/122201 ↗
43. Improving molecular planarity by changing alkyl chain position enables 12.3% efficiency all‐small‐molecule organic solar cells with enhanced carrier lifetime and reduced recombination10.1002/solr.201900326 ↗
44. Over 14% efficiency nonfullerene all-small-molecule organic solar cells enabled by improving the ordering of molecular donors via side-chain engineering10.1039/D0TA01893G ↗
45. A new small molecule donor for efficient and stable all small molecule organic solar cells10.1016/j.orgel.2019.03.011 ↗
46. Effects of alkoxy and fluorine atom substitution of donor molecules on the morphology and photovoltaic performance of all small molecule organic solar cells10.3389/fchem.2018.00413 ↗
47. 15.34% efficiency all-small-molecule organic solar cells with an improved fill factor enabled by a fullerene additive10.1039/D0EE00714E ↗
48. Noncovalently fused-ring electron acceptors with near-infrared absorption for high-performance organic solar cells10.1038/s41467-019-11001-6 ↗
49. A fully non-fused ring acceptor with planar backbone and near-ir absorption for high performance polymer solar cells10.1002/anie.202010856 ↗
50. Organic and polymeric semiconductors enhanced by noncovalent conformational locks10.1021/acs.chemrev.7b00084 ↗
51. Designing high performance conjugated materials for photovoltaic cells with the aid of intramolecular noncovalent interactions10.1039/D0CC07086F ↗
52. Enhancing the performance of organic solar cells by hierarchically supramolecular self-assembly of fused-ring electron acceptors10.1021/acs.chemmater.8b01319 ↗
53. Simple-structured nir-absorbing small-molecule acceptors with a thiazolothiazole core: multiple noncovalent conformational locks and D-A effect for efficient OSCs10.1021/acsami.9b16686 ↗
54. Regulating the packing of non-fullerene acceptors via multiple noncovalent interactions for enhancing the performance of organic solar cells10.1021/acsami.9b18076 ↗
55. Bis(methylthio)tetracenes: synthesis, crystal-packing structures, and OFET properties10.1021/jo200696a ↗
56. Simultaneous enhancement of three parameters of P3HT-based organic solar cells with one oxygen atom10.1002/aenm.201803012 ↗
57. Exploiting noncovalently conformational locking as a design strategy for high performance fused-ring electron acceptor used in polymer solar cells10.1021/jacs.7b00566 ↗
58. Developing wide bandgap polymers based on sole benzodithiophene units for efficient polymer solar cells10.1002/chem.202000951 ↗
59. Subtle polymer donor and molecular acceptor design enable efficient polymer solar cells with a very small energy loss10.1002/adfm.201907570 ↗
60. Controlling conformations of conjugated polymers and small molecules: the role of nonbonding interactions10.1021/ja403667s ↗
61. Efficient organic solar cell with 16.88% efficiency enabled by refined acceptor crystallization and morphology with improved charge transfer and transport properties10.1002/aenm.201904234 ↗
62. Fused ring non-fullerene acceptors with benzothiophene dioxide end groups and their side chain effect investigations10.1016/j.dyepig.2020.108452 ↗