journal article·2016-08

Synthesis and properties of a novel narrow band gap oligomeric diketopyrrolopyrrole-based organic semiconductor

Mylène Le Borgne, Jesse Quinn, Jaime Martín, Natalie Stingelin, Guillaume Wantz, Yuning Li

Dyes and Pigments· Volume 131
Publisher page

Abstract

An oligomeric semiconductor containing three bisthiophenediketopyrrolopyrole units (Tri-BTDPP) was synthesized and characterized. Tri-BTDPP has a HOMO level of -5.34 eV, a broad absorption close to the near infrared region and a low band gap of 1.33 eV. Additionally, a promising hole mobility of 1 x 10-3 cm V-1 s-1 was achieved after thermal annealing at 150 C in organic field effect transistors (OFET). Organic photovoltaic (OPV) cells containing Tri-BTDPP and PC71BM as the donor/acceptor couple exhibited a power conversion efficiency (PCE) of 0.72%. Through an intensive study of the active layer using AFM, XRD, and DSC, it was found that Tri-BTDPP and PC71BM were unable to intermix effectively, resulting in oversized Tri-BTDPP crystalline phases and thus poor charge separation. Strategies to improve the OPV performance were thus proposed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Dye-based donor/acceptor solar cells10.1016/S0927-0248(99)00097-5 ↗
2. Small-molecule solar cells-status and perspectives10.1088/0957-4484/19/42/424001 ↗
3. Small molecule organic semiconductors on the move: promises for future solar energy technology10.1002/anie.201102326 ↗
4. Solution processable D–A small molecules for bulk-heterojunction solar cells10.1039/c003946b ↗
5. Small molecule semiconductors for high-efficiency organic photovoltaics10.1039/c2cs15313k ↗
6. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
7. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
8. Polymer solar cells10.1038/nphoton.2012.11 ↗
9. Polymer-based solar cells10.1016/S1369-7021(07)70276-6 ↗
10. Single-junction polymer solar cells exceeding 10% power conversion efficiency10.1002/adma.201404535 ↗
11. Single junction inverted polymer solar cell reaching power conversion efficiency 10.31% by employing dual-doped zinc oxide nano-film as cathode interlayer10.1038/srep06813 ↗
12. Aggregation-dependent photovoltaic properties of squaraine/PC61BM bulk heterojunctions10.1039/c2cp40789b ↗
13. Small-molecule solar cells with efficiency over 9%10.1038/nphoton.2014.269 ↗
14. Solution-processed small-molecule solar cells with 6.7% efficiency10.1038/nmat3160 ↗
15. Rational design of small molecular donor for solution-processed organic photovoltaics with 8.1% efficiency and high fill factor via multiple fluorine substituents and thiophene bridge10.1002/adfm.201500190 ↗
16. Solution-processed small-molecule solar cells: breaking the 10% power conversion efficiency10.1038/srep03356 ↗
17. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
18. Improving the ordering and photovoltaic properties by extending π-conjugated area of electron-donating units in polymers with D-A structure10.1002/adma.201200995 ↗
19. Prominent short-circuit currents of fluorinated quinoxaline-based copolymer solar cells with a power conversion efficiency of 8.0%10.1021/cm302861s ↗
20. Wallquist · 2001
21. A low band gap, solution processable oligothiophene with a diketopyrrolopyrrole core for use in organic solar cells10.1021/jp8031572 ↗
22. Tri-diketopyrrolopyrrole molecular donor materials for high-performance solution-processed bulk heterojunction solar cells10.1002/adma.201302007 ↗
23. Efficient strategies to improve photovoltaic performance of linear-shape molecules by introducing large planar aryls in molecular center and terminals10.1016/j.orgel.2014.12.004 ↗
24. An ester-functionalized diketopyrrolopyrrole molecule with appropriate energy levels for application in solution-processed organic solar cells10.1039/C2TA00148A ↗
25. Solution-processed DPP-based small molecule that gives high photovoltaic efficiency with judicious device optimization10.1021/am302896u ↗
26. A naphthodithiophene-diketopyrrolopyrrole donor molecule for efficient solution-processed solar cells10.1021/ja202791n ↗
27. A direct arylation-derived DPP-based small molecule for solution-processed organic solar cells10.1088/0957-4484/25/1/014006 ↗
28. Conjugated polymers containing diketopyrrolopyrrole units in the main chain10.3762/bjoc.6.92 ↗
29. Diketopyrrolopyrrole (DPP)-based materials for organic photovoltaics10.1039/c2cc17886a ↗
30. High mobility diketopyrrolopyrrole (DPP)-based organic semiconductor materials for organic thin film transistors and photovoltaics10.1039/c3ee00015j ↗
31. C–H activation: making diketopyrrolopyrrole derivatives easily accessible10.1039/c2ta01318e ↗
32. Fluorinated benzothiadiazole (BT) groups as a powerful unit for high-performance electron-transporting polymers10.1021/am505925w ↗
33. Synthesis and applications of novel low bandgap star-burst molecules containing a triphenylamine core and dialkylated diketopyrrolopyrrole arms for organic photovoltaics10.1039/c2jm16760c ↗
34. Capturing a ghost. Synthesis and structural characterization of Pd(dba)[P(o-Tol)3]210.1021/om400335a ↗
35. New two-dimensional thiophene-acceptor conjugated copolymers for field effect transistor and photovoltaic cell applications10.1021/cm100661z ↗
36. A stable solution-processed polymer semiconductor with record high-mobility for printed transistors10.1038/srep00754 ↗
37. Record high electron mobility of 6.3 cm2 V−1 s−1 achieved for polymer semiconductors using a new building block10.1002/adma.201305981 ↗
38. Influence of side chain length and bifurcation point on the crystalline structure and charge transport of diketopyrrolopyrrole-quaterthiophene copolymers (PDQTs)10.1039/C3TC32219J ↗
39. Is a polymer semiconductor having a “perfect” regular structure desirable for organic thin film transistors?10.1039/C5SC00843C ↗
40. Tri-diketopyrrolopyrrole molecular donor materials for high-performance solution-processed bulk heterojunction solar cells10.1002/adma.201302007 ↗
41. Design rules for donors in bulk-heterojunction solar cells—towards 10 % energy-conversion efficiency10.1002/adma.200501717 ↗
42. Relationship between the ionization and oxidation potentials of molecular organic semiconductors10.1016/j.orgel.2005.01.002 ↗
43. A low-bandgap alternating copolymer containing the dimethylbenzimidazole moiety10.1039/c0jm00772b ↗
44. Tri-diketopyrrolopyrrole molecular donor materials for high-performance solution-processed bulk heterojunction solar cells
45. Solvent additive effects on small molecule crystallization in bulk heterojunction solar cells probed during spin casting10.1002/adma.201302389 ↗
46. Morphology control of solution processable small molecule bulk heterojunction solar cells via solvent additives10.1039/c2ra01182d ↗
47. Recent progress of bulk heterojunction solar cells based on small-molecular donors10.1007/s11434-013-5930-z ↗
48. Small molecular weight organic thin-film photodetectors and solar cells10.1063/1.1534621 ↗
49. Enhanced exciton diffusion in an organic photovoltaic cell by energy transfer using a phosphorescent sensitizer10.1063/1.3120566 ↗
50. Solvent-induced morphology in polymer-based systems for organic photovoltaics10.1002/adfm.201100945 ↗
51. Evolution of vertical phase separation in P3HT: PCBM thin films induced by thermal annealing10.1016/j.matchemphys.2011.06.007 ↗
52. Three-dimensional bulk heterojunction morphology for achieving high internal quantum efficiency in polymer solar cells10.1002/adfm.200900183 ↗
53. On the role of intermixed phases in organic photovoltaic blends10.1039/c3ee41821a ↗
54. The influence of microstructure on charge separation dynamics in organic bulk heterojunction materials for solar cell applications10.1039/C3TA15112C ↗
55. Achieving balanced intermixed and pure crystalline phases in PDI-based non-fullerene organic solar cells via selective solvent additives10.1039/C4CP04161E ↗
56. Two-dimensional charge transport in self-organized, high-mobility conjugated polymers10.1038/44359 ↗
57. Fullerene nucleating agents: a route towards thermally stable photovoltaic blends10.1002/aenm.201301437 ↗
58. Use of a commercially available nucleating agent to control the morphological development of solution-processed small molecule bulk heterojunction organic solar cells10.1039/C4TA03469D ↗