journal article·2021-03

Efficient ternary all small molecule organic photovoltaics with NC70BA as third component materials

Zhiyong Liu, Ning Wang

Dyes and Pigments· Volume 187
Publisher page

Abstract

Abstract Inverted small molecule organic photovoltaics (SMPVs) were fabricated with BTR as a donor, the narrow band gap material Y11 as an acceptor and NC70BA fullerene derivatives with a broad band gap as the third component materials. When 20 wt% Y11 was replaced by NC70BA, a higher PCE of 13.92% was achieved, which is attributed to simultaneous enhancement of the JSC of 22.16 mA cm−2, the VOC of 0.905 V and the FF of 69.4%. The hollow spherical structure of NC70BA may lead to the connection of Y11 and BTR molecules to form more continuous electron transport channels. Shallow lowest unoccupied molecular orbital (LUMO) energy levels form a cascade of LUMO energy levels among the used materials. In addition, the molecular arrangement and crystallinity in the photoactive layer can be markedly adjusted by incorporating NC70BA into BTR:Y11 binary films. The well-optimized phase separation and molecular arrangement in ternary photoactive layers can well support an enhanced JSC and FF for ternary SMPVs. Thus, the photovoltaic performance of SMPVs can be well improved by employing a ternary strategy with NC70BA as the third component materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Molecular Junctions and Nanostructures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. 18% Efficiency organic solar cells10.1016/j.scib.2020.01.001 ↗
2. Recent progress on non-fullerene acceptors for organic photovoltaics10.1016/j.mattod.2018.09.004 ↗
3. Non-fullerene acceptors for organic solar cells10.1038/natrevmats.2018.3 ↗
4. Design principles and synergistic effects of chlorination on a conjugated backbone for efficient organic photovoltaics: a critical review10.1002/adma.201906175 ↗
5. Alkyl chain tuning of small molecule acceptors for efficient organic solar cells10.1016/j.joule.2019.09.010 ↗
6. Single-junction polymer solar cells with 16.35% efficiency enabled by a platinum(II) complexation strategy10.1002/adma.201901872 ↗
7. Single-junction organic photovoltaic cells with approaching 18% efficiency10.1002/adma.201908205 ↗
8. Small energy loss and broad energy levels offsets lead to efficient ternary polymer solar cells from a blend of two fullerene-free small molecules as electron acceptors10.1002/adom.201900913 ↗
9. Rational design of truxene-bridged PDI trimers as acceptors for efficient organic solar cells10.1016/j.dyepig.2018.04.020 ↗
10. Simple organic donors based on halogenated oligothiophenes for all small molecule solar cells with efficiency over 11%10.1039/D0TA00159G ↗
11. All-small-molecule organic solar cells with an ordered liquid crystalline donor10.1016/j.joule.2019.09.009 ↗
12. Over 16.7% efficiency of ternary organic photovoltaics by employing extra PC71BM as morphology regulator
13. The role of the third component in ternary organic solar cells10.1038/s41578-019-0093-4 ↗
14. Enabling high‐performance tandem organic photovoltaic cells by balancing the front and rear subcells10.1002/adma.202002315 ↗
15. Transparent hole‐transporting frameworks: a unique strategy to design high‐performance semitransparent organic photovoltaics10.1002/adma.202003891 ↗
16. Over 14.5% efficiency and 71.6% fill factor of ternary organic solar cells with 300 nm thick active layers10.1039/C9EE04020J ↗
17. Complementary light absorption and efficient exciton dissociation lead to efficient and excellent ternary polymer solar cells10.1039/C9TA12046G ↗
18. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
19. Next-generation organic photovoltaics based on non-fullerene acceptors10.1038/s41566-018-0104-9 ↗
20. Highly efficient and thermally stable polymer solar cells with dihydronaphthyl-based 70 fullerene bisadduct derivative as the acceptor10.1002/adfm.201102771 ↗
21. Ternary bulk heterojunction solar cells: addition of soluble NIR dyes for photocurrent generation beyond 800 nm10.1021/am5007172 ↗
22. High-efficiency organic solar cells with low non-radiative recombination loss and low energetic disorder10.1038/s41566-019-0573-5 ↗
23. High-efficiency small-molecule ternary solar cells with a hierarchical morphology enabled by synergizing fullerene and non-fullerene acceptors10.1038/s41560-018-0234-9 ↗
24. Benzotriazole-based acceptor and donors, coupled with chlorination, achieve a high V-oc of 1.24 V and an efficiency of 10.5% in fullerene-free organic solar cells10.1021/acs.chemmater.8b05316 ↗
25. Correlations between performance of organic solar cells and film-depth-dependent optical and electronic variations10.1002/adom.201900152 ↗
26. Recombination dynamics as a key determinant of open circuit voltage in organic bulk heterojunction solar cells: a comparison of four different donor polymers10.1002/adma.201002360 ↗
27. Insights into charge separation and transport in ternary polymer solar cells10.1021/acsami.8b18240 ↗
28. 13.9% efficiency ternary nonfullerene organic solar cells featuring low-structural order10.1021/acsenergylett.9b01630 ↗
29. Ternary nonfullerene polymer solar cells with efficiency >13.7% by integrating the advantages of the materials and two binary cells10.1039/C8EE01107A ↗
30. 13.26% efficiency polymer solar cells by optimizing photogenerated exciton distribution and phase separation with the third component10.1002/solr.201900269 ↗
31. Tuning the optoelectronic properties of vinylene linked perylenediimide dimer by ring annulation at the inside or outside bay positions for fullerene-free organic solar cells10.1016/j.jechem.2019.03.007 ↗
32. Enhanced performance and stability of ternary organic solar cells utilizing two similar structure blend fullerene-free molecules as electron acceptor10.1002/adom.201901241 ↗
33. Tuning Voc for high performance organic ternary solar cells with non-fullerene acceptor alloys10.1039/C7TA06237K ↗
34. Achieving high-performance ternary organic solar cells through tuning acceptor alloy10.1002/adma.201603154 ↗
35. Efficient polymer solar cells having high open-circuit voltage and low energy loss enabled by a main-chain twisted small molecular acceptor10.1021/acsami.9b03499 ↗
36. Balancing high open circuit voltage over 1.0 V and high short circuit current in benzodithiophene-based polymer solar cells with low energy loss: a synergistic effect of fluorination and alkylthiolation10.1002/aenm.201701471 ↗
37. C-60-small arylamine push-pull dyads for single-material organic solar cells10.1016/j.dyepig.2019.107748 ↗
38. Effect of dihydronaphthyl-based C60 bisadduct as third component materials on the photovoltaic performance and charge carrier recombination of binary PBDB-T:ITIC polymer solar cells10.1039/C8NR01969J ↗
39. A ternary organic solar cell with 300 nm thick active layer shows over 14% efficiency10.1007/s11426-019-9556-7 ↗
40. Achieving 17.4% efficiency of ternary organic photovoltaics with two well-compatible nonfullerene acceptors for minimizing energy loss10.1002/aenm.202001404 ↗
41. Impact of an electron withdrawing group on the thiophene-fused benzotriazole unit on the photovoltaic performance of the derived polymer solar cells10.1016/j.dyepig.2019.03.056 ↗
42. The effect of alkyl chain branching positions on the electron mobility and photovoltaic performance of naphthodithiophene diimide (NDTI)-based polymers10.1007/s11426-019-9645-1 ↗
43. Two compatible polymer donors contribute synergistically for ternary organic solar cells with 17.53% efficiency10.1039/D0EE02516J ↗
44. From recombination dynamics to device performance: quantifying the efficiency of exciton dissociation, charge separation, and extraction in bulk heterojunction solar cells with fluorine-substituted polymer donors10.1002/aenm.201701678 ↗
45. Distinct exciton dissociation behavior of organolead trihalide perovskite and excitonic semiconductors studied in the same system10.1002/smll.201402905 ↗
46. Small energy loss in ternary organic solar cells with a blend of cascade energy levels two fullerene-free acceptors as the electron acceptor10.1039/C9TC03210J ↗
47. The finale of a trilogy: comparing terpolymers and ternary blends with structurally similar backbones for use in organic bulk heterojunction solar cells10.1039/C8TA05132A ↗
48. The comprehensive utilization of the synergistic effect of fullerene and non-fullerene acceptors to achieve highly efficient polymer solar cells10.1039/C9TA04286E ↗
49. Morphology-dependent hole transfer under negligible HOMO difference in non-fullerene acceptor-based ternary polymer solar cells10.1021/acsami.8b20884 ↗
50. Introducing fluorine and sulfur atoms into quinoxaline-based p-type polymers to gradually improve the performance of fullerene-free organic solar cells10.1021/acsmacrolett.9b00368 ↗
51. Ternary organic solar cells with NC(70)BA as a third component material exhibit high open-circuit voltage and small energy losses10.1016/j.jpowsour.2019.227442 ↗
52. A new fluorinated pyran-bridged A-D-A type small molecular acceptor for organic solar cells10.1016/j.dyepig.2019.108165 ↗
53. Ternary polymer–perylenediimide–carbon nanotube photovoltaics with high efficiency and stability under super-solar irradiation10.1021/acsenergylett.6b00291 ↗
54. Excimer emission induced intra-system selfabsorption enhancement – a novel strategy to realize high efficiency and excellent stability ternary organic solar cells processed in green solvents10.1039/C8TA09350D ↗
55. 13.34 % efficiency non-fullerene all-small-molecule organic solar cells enabled by modulating the crystallinity of donors via a fluorination strategy10.1002/anie.201910297 ↗
56. 16.67% rigid and 14.06% flexible organic solar cells enabled by ternary heterojunction strategy10.1002/adma.201902210 ↗
57. Side chain engineering of quinoxaline-based small molecular nonfullerene acceptors for high-performance poly(3-hexylthiophene)-based organic solar cells10.1007/s11426-019-9618-7 ↗
58. Controlling the cyano-containing A2 segments in A2-A1-D-A1-A2 type non-fullerene acceptors to combine with a benzotriazole-based p-type polymer: “same-acceptor-strategy” for high VOC organic solar cells10.1002/solr.201800332 ↗
59. 16.55% efficiency ternary organic solar cells enabled by incorporating a small molecular donor10.1039/C9TA10145D ↗
60. Insight into the effects of alkoxy side chain position in nonfullerene electron acceptors on the morphological stability of organic solar cells10.1016/j.dyepig.2020.108562 ↗
61. The role of Y6 as the third component in fullerene-free ternary organic photovoltaics10.1016/j.dyepig.2020.108613 ↗
62. Alloy-like ternary polymer solar cells with over 17.2% efficiency10.1016/j.scib.2020.01.012 ↗
63. Ternary non-fullerene polymer solar cells with a high crystallinity n-type organic semiconductor as the second acceptor10.1039/C8TA08406H ↗