journal article·2018-09-01Open access

Physical properties of ZnTe semiconductor thin films prepared by high vacuum resistive system

M. Abbas, N. A. Shah, K. Jehangir, M. Fareed, A. Zaidi

Materials Science-Poland· Volume 36· Issue 3

Abstract

Abstract Zinc telluride (ZnTe) polycrystalline films have been grown on well-cleaned glass substrates by thermal vacuum evaporation technique using 99.99 % pure ZnTe powder as an evaporant. The samples were prepared at different substrate temperatures, rates of evaporation and thicknesses. The X-ray diffraction was used to study the structure of the films. The structures of the samples were found to be polycrystalline with preferred (1 1 1) orientation. Transmission spectra of all ZnTe films were recorded in the range of 300 nm to 2500 nm. The films were electrically characterized using Hall effect measurements at room temperature. It has been stated that the electrical resistivity, mobility and carrier concentration are strongly influenced by the substrate temperature. From the SEM results, it is clear that the surface of ZnTe is very smooth with occasional large particles on it.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Phase-change materials and chalcogenides · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Physics, COMSATS Institute of Information Technology , Islamabad 4000 , Pakistan

Ripha International University , Islamabad 4000 , Pakistan

Pakistan Council of Renewable Energy Technologies , Islamabad 4000 , Pakistan

References (20)

Show source-provided references
1. [1] Ali A., Shah N.A., Aqili A.K.S., Maqsood A., Semicond. Sci. Tech., 21 (2006), 1296.10.1088/0268-1242/21/9/014 ↗
2. [2] Syed W.A., Shah N.A., Chalcogenide Lett., 12 (2015), 157.
3. [3] Kazmerski L.L., Ayyagari M.S., Sanborn G.A., J., Appl. Phys., 46 (1975), 4865.10.1063/1.321521
4. [4] Rao G.K., Bangera K.V., Shivakumar G.K., Solid State Electron., 54 (2010), 787.10.1016/j.sse.2010.03.013 ↗
5. [5] Feng L., Mao D., Tang J., Culins R.T., Trenfny J.U., J. Electron. Mater., 25 (1996), 1442.10.1007/BF02655377 ↗
6. [6] Chaure N.B., Nasir J.P., Jayakrishnan R., Ganesan V., Pandey R.K., Thin Solid Films, 324 (1998), 78.10.1016/S0040-6090(97)01209-1 ↗
7. [7] Shah N.A., Nazir A., Mahmood W., Syed W.A.A., Butt S., Ali Z., Maqsood A., J. Alloy. Compd., 512 (2012), 27.10.1016/j.jallcom.2011.08.081 ↗
8. [8] Shah N.A., Ali A., Maqsood A., J. Electron. Mater., 37 (2008), 145.10.1007/s11664-007-0338-7 ↗
9. [9] Murali K.R., Rajkumar P.R., J. Mater. Sci. Mater. Electron., 17 (2006), 393.10.1007/s10854-006-7476-1
10. [10] Matsumoto T., Ishida T., J. Cryst. Growth, 67 (1984), 135.10.1016/0022-0248(84)90142-8 ↗
11. [11] Pal U., Saha S., Chaudhuri A.K., Rao V.V., Banerjee H.D., J. Phys. D Appl. Phys., 22 (1989), 965.10.1088/0022-3727/22/7/014
12. [12] Waqar M., Shah N.A., Opt. Mater., 36 (2014), 1449.10.1016/j.optmat.2013.09.003 ↗
13. [13] Patel S.M., Patel N.G., Mater. Lett., 1 (1983), 131.10.1016/0167-577X(83)90053-8 ↗
14. [14] Vincett P.S., Barlow W.A., Roberts G.G., J. Appl. Phys., 48 (1977), 3800.10.1063/1.324299
15. [15] Kobayashi S., Saito N., Shibua T., Jpn. J. Appl. Phys., 19 (1980), 1199.10.1143/JJAP.19.1199 ↗
16. [16] Waqar M., Shah N.A., Thin Solid Films, 544 (2013), 307.10.1016/j.tsf.2013.03.088 ↗
17. [17] Nguyen C.Q., Adeogun A., Afzaal M., Malik M.A., Brien P.O., Chem. Commun., 18 (2006), 2182.10.1039/b603198f
18. [18] Binks D.J., Bant S.P., West D.P., Brien P.O., Malik M.A., J. Mod. Opt., 50 (2003), 299.10.1080/09500340210149714 ↗
19. [19] Akhtar M., Akhter J., Malik M.A., Brien P.O., Tuna F., Raftery J., Helliwell M., J. Mater. Chem., 21 (2011), 9737.10.1039/c1jm10703h10.1039/c1jm10703h ↗
20. [20] Ali A., Shah N.A, Aqili A.K.S., Maqsood A., Cryst. Growth Des., 6 (2006), 2149.10.1021/cg060217q10.1021/cg060217q ↗