journal article·2020-06

Chemical stability for humidity control during the processing of solar cells with halide perovskites

Eddie Nahúm Armendáriz-Mireles, Wilian Jesús Pech-Rodríguez, Carlos Adrián Calles-Arriaga, Enrique Rocha-Rangel

Publisher page

Abstract

Abstract The implementation of Perovskite solar cell (PSCs) technology in practical applications has been hindered by their poor chemical stability and low efficiency. Organic halide materials with a Perovskite crystal structure have been proposed to improve the global efficiency in PSCs. Nevertheless, it has been seen that humidity is one key parameter to be considered during the processing of Perovskite films, because humidity strongly affects its structural properties and therefore their performance. In this work, it was studied the effect of two prominent solvents molecules named Dimethylformamide (DMF) and Dimethylsulfoxide (DMSO) as solvents to control the chemical stability of the synthesized perovskite layer under relative high humidity. When Perovskite layers were fabricated under relative humidity of 45% and 55%, the photocurrent-voltage curves show that whit the adequate ratio of DMF and DMSO efficiencies of 12.3% can be obtained. Therefore, these results suggest that the use of DMF and DMSO as solvents for PSCs is an effective strategy to fabricate cheaper and efficient Perovskite nanostructures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Solar energy for future world: - a review10.1016/j.rser.2016.05.022 ↗
2. Optimization of ITO glass/TiO2 based DSSC photo-anodes through electrophoretic deposition and sintering techniques10.1016/j.ceramint.2017.05.113 ↗
3. Hybrid organic-inorganic perovskites: polar properties and applications10.1016/j.ccr.2019.02.012 ↗
4. Perovskite photovoltaic modules: life cycle assessment of pre-industrial production process10.1016/j.isci.2018.10.020 ↗
5. Limit of efficiency for photon-enhanced thermionic emission vs. photovoltaic and thermal conversion10.1016/j.solmat.2015.05.001 ↗
6. InGaAs and GaAs quantum dot solar cells grown by droplet epitaxy10.1016/j.solmat.2016.12.024 ↗
7. Comparison of life cycle environmental impacts of different perovskite solar cell systems10.1016/j.solmat.2017.03.008 ↗
8. Effect of different lead precursors on perovskite solar cell performance and stability10.1039/C4TA06198E ↗
9. Ionic effect enhances light emission and the photovoltage of methylammonium lead bromide perovskite solar cells by reduced surface recombination10.1021/acsenergylett.9b00186 ↗
10. Fundamental Physics behind high efficiency organometal halide perovskite solar cells
11. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
12. National Renewable Energy Laboratory · 2019
13. Efficient, stable and scalable perovskite solar cells using poly (3-hexylthiophene)10.1038/s41586-019-1036-3 ↗
14. Molecular dynamics simulations of organohalide perovskite precursors: solvent effects in the formation of perovskite solar cells10.1039/C5CP03220B ↗
15. “Flash infrared annealing as a cost-effective and low environmental impact processing method for planar perovskite solar cells” Materials
16. Perovskite sensitized erbium doped TiO2 photoanode solar cells with enhanced photovoltaic performance10.1016/j.optmat.2019.05.039 ↗
17. Contreras-Bernal · 2019 · vol. 1902
18. Homeopathic perovskite solar cells: effect of humidity during fabrication on the performance and stability of the device10.1021/acs.jpcc.8b01558 ↗
19. A. Guerrero and juan bisquert “ionic effect enhances light emission and the photovoltage of methylammonium lead bromide perovskite solar cells by reduced surface recombination10.1021/acsenergylett.9b00186 ↗
20. Efficient, high yield perovskite photovoltaic devices grown by interdiffusion of solution-processed precursor stacking layers10.1039/C4EE01138D ↗
21. Impact of moisture on efficiency-determining electronic processes in perovskite solar cells10.1039/C7TA02264F ↗
22. Unusual defect Physics in CH3NH3PbI3 perovskite solar cell absorber10.1063/1.4864778 ↗
23. Morphology-photovoltaic property correlation in perovskite solar cells: one-step versus two-step deposition of CH3NH3PbI3
24. Origin and whereabouts of recombination in perovskite solar cells10.1021/acs.jpcc.7b01206 ↗
25. Specific cation interactions as the cause of slow dynamics and hysteresis in dye and perovskite solar cells: a small-perturbation study10.1039/C6CP05851E ↗
26. Chemical pathways connecting lead (II) iodide and perovskite via polymeric plumbate(II) fiber10.1021/jacs.5b10599 ↗
27. Coordination chemistry dictates the structural defects in lead halide perovskite10.1002/cphc.201600575 ↗
28. Formation criteria of high efficiency perovskite solar cells under ambient conditions”10.1039/C6SE00077K ↗
29. Controllable perovskite crystallization via antisolvent technique using chloride additives for highly effiient planar perovskite solar cells10.1002/aenm.201803587 ↗
30. Highly reproducible perovskite solar cells with average efficiency of 18.3% and best efficiency of 19.7% fabricated via Lewis base adduct of lead (II) iodide10.1021/jacs.5b04930 ↗
31. Operation mechanism of perovskite quantum dot solar cells probed by impedance spectroscopy10.1021/acsenergylett.8b02157 ↗
32. Effect of calcination temperature on performance of ZnO nanoparticles for dye-sensitized solar cells10.1016/j.powtec.2017.11.065 ↗
33. Understanding the influence of interface morphology on the performance of perovskite solar cells10.3390/ma11071073 ↗
34. Elucidating transport-recombination mechanisms in perovskite solar cells by small-perturbation techniques10.1021/jp5069076 ↗
35. An inorganic hole conductor for organo lead halide perovskite solar cells. Improved hole conductivity with copper iodide10.1021/ja411014k ↗
36. How to make over 20% efficient perovskite solar cells in regular (n-i-p) and inverted (p-i-n) architectures10.1021/acs.chemmater.8b00136 ↗
37. ZnO@SnO2 engineered composite photoanodes for dye sensitized solar cells10.1038/srep14523 ↗
38. “Control of I – V hysteresis in CH 3 NH 3 PbI 3 perovskite solar cell”10.1021/acs.jpclett.5b02273 ↗
39. Atmospheric effects on the photovoltaic performance of hybrid perovskite solar cells10.1016/j.solmat.2015.01.023 ↗
40. Reversible hydration of CH 3 NH 3 PbI 3 in films, single crystals, and solar cells10.1021/acs.chemmater.5b00660 ↗
41. Humidity-induced grain boundaries in MAPbI3 perovskite films
42. Effect of relative humidity on crystal growth, device performance and hysteresis in planar heterojunction perovskite solar cells10.1039/C5NR04179A ↗
43. Huang · 2017 · vol. 10 · 599
44. Anti-solvent crystallization strategies for highly efficient perovskite solar cells10.3390/cryst7100291 ↗
45. Effects of process parameters on the characteristics of mixed-halide perovskite solar cells fabricated by one-step and two-step sequential coating10.1186/s11671-016-1601-8 ↗
46. Perovskite solar cell modeling using light and voltage modulated techniques10.1021/acs.jpcc.9b01187 ↗
47. Unbroken perovskite: interplay of morphology, electro-optical properties, and ionic movement10.1002/adma.201600624 ↗
48. Microseconds, milliseconds and seconds: deconvoluting the Dynamic behaviour of planar perovskite solar cells10.1039/C6CP08424A ↗