journal article·2025-12Open access

Non-hydrolytic sol-gel synthesis of BaTiO3 nanoparticles for piezoelectric-enhanced photocatalytic degradation of organic pollutants

Yina Zheng, Guo Feng, Chao Chen, Yunjing Chen, Na Tu, Feng Jiang, Xiangping Jiang

Abstract

Piezo-photocatalysis is a promising green route for dye degradation, but the widely studied ferroelectric BaTiO 3 (BT) suffers from weak light absorption and insufficient piezoelectric polarization, leading to low catalytic activity. In this work, BaTiO 3 (BT) nanopowders were synthesized via the non-hydrolytic sol-gel (NHSG) method. By tuning particle size, phase structure and defect distribution, the piezo-photocatalytic activity was significantly enhanced. This paper systematically explores the reaction pathways for the synthesis of BT nanopowders via the NHSG method and highlights the significant effect of calcination temperature on the evolution of the crystal structure of BT. Within the 600–950 °C range, increasing calcination temperature significantly improved the crystallinity of the BT samples, with a gradual increase in the tetragonal phase content. The sample calcined at 850 °C (BT-850) exhibited smaller crystallite size and higher specific surface area compared to commercial BT (BT-C). Under combined UV irradiation and ultrasound vibration, BT-850 displayed superior catalytic activity. This enhancement is attributed to improved spontaneous polarization, shortened charge carrier migration paths, and abundant surface active sites. Polarization treatment further enhanced catalytic performance, with the degradation rate constant ( k ) increasing by 39.2–56.8 %. The polarized BT-850 exhibited the highest performance, achieving a Rhodamine B degradation efficiency of 95.76 % and a degradation rate constant ( k ) of 22.57 × 10 −3 min −1 . These results confirm the crucial role of ferroelectric domain orientation in the piezo-photocatalytic synergy. This study provides valuable insight into the controllable preparation of high-performance BT nanopowders for advanced catalytic applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Photocatalysis Techniques · Gas Sensing Nanomaterials and Sensors · TiO2 Photocatalysis and Solar Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Enhanced piezotronics by single-crystalline ferroelectrics for uniformly strengthening the piezo-photocatalysis of electrospun BaTiO3@TiO2 nanofibers10.1039/D2NR03828E ↗
2. The interface design of (0D/2D/1D) AgI/BiOI/C3N5 dual Z-scheme heterostructures with efficient visible-light-driven photocatalytic activity10.1016/j.seppur.2022.122815 ↗
3. A novel NiO/BaTiO3 heterojunction for piezocatalytic water purification under ultrasonic vibration10.1016/j.ultsonch.2022.106285 ↗
4. Excellent catalytic performance of molten-salt-synthesized Bi0.5Na0.5TiO3 nanorods by the piezo-phototronic coupling effect10.1016/j.nanoen.2021.105936 ↗
5. Piezotronic-enhanced photocatalytic performance of heterostructured BaTiO3/SrTiO3 nanofibers10.1016/j.nanoen.2021.106391 ↗
6. Signally enhanced piezo-photocatalysis of Bi0.5Na0.5TiO3/MWCNTs composite for degradation of rhodamine B10.1016/j.chemosphere.2022.136596 ↗
7. Ultrasound-assisted piezoelectric photocatalysis: an effective strategy for enhancing hydrogen evolution from water splitting10.1016/j.nanoen.2023.108993 ↗
8. Advances in piezo-phototronic effect enhanced photocatalysis and photoelectrocatalysis10.1002/aenm.202000214 ↗
9. Ultrathin BaTiO3 nanowires with high aspect ratio: a simple one-step hydrothermal synthesis and their strong microwave absorption10.1021/am4014506 ↗
10. A dual chelating sol-gel synthesis of BaTiO3 nanoparticles with effective photocatalytic activity for removing humic acid from water10.1016/j.materresbull.2012.11.075 ↗
11. A simple one-step hydrothermal synthesis and photocatalysis of bowl-like BaTiO3 nanoparticles10.1080/15533174.2016.1212227 ↗
12. High piezo-photocatalysis of BaTiO3 nanofibers for organic dye decomposition
13. Synthesis of flexible BaTiO3 nanofibers for efficient vibration-driven piezocatalysis10.1016/j.ceramint.2021.05.264 ↗
14. Nano‐ferroelectric for high efficiency overall water splitting under ultrasonic vibration10.1002/anie.201907695 ↗
15. Ultra-small size and crystal-axis-oriented BaTiO3 nanocrystals: dielectric and photocatalytic response10.1016/j.ceramint.2024.07.159 ↗
16. A critical review on strategies for improving efficiency of BaTiO3-based photocatalysts for wastewater treatment10.1016/j.jenvman.2021.112679 ↗
17. Piezo-photocatalysts in the field of energy and environment: designs, applications, and prospects10.1016/j.nanoen.2023.108508 ↗
18. Hollow-structured BaTiO3 nanoparticles with cerium-regulated defect engineering to promote piezocatalytic antibacterial treatment10.1016/j.apcatb.2023.122520 ↗
19. Impact of oxygen vacancy occupancy on piezo-catalytic activity of BaTiO3 nanobelt10.1016/j.apcatb.2020.119340 ↗
20. Solid-state synthesis of nano-sized BaTiO3 powder with high tetragonality10.1007/s10853-007-1537-6 ↗
21. Hydrothermal synthesis and structure characterization of nanocrystalline barium titanate powders10.4028/www.scientific.net/AMR.11-12.23 ↗
22. Solvothermal synthesis and characterization of barium titanate powders10.1111/j.1151-2916.2000.tb01606.x ↗
23. Polymorphism and dielectric properties of Sc-doped BaTiO3 nanopowders synthesized by sol-gel method10.1016/j.materresbull.2013.02.044 ↗
24. Controllable preparation of Na0.4K0.1Bi0.5TiO3-CaZrO3-NaNbO3 nanoceramics with excellent temperature-stable energy storage performance by combining sol-gel synthesis and two-step sintering10.1016/j.ceramint.2022.06.091 ↗
25. Nonhydrolytic sol-gel in-situ synthesis of novel recoverable amorphous Fe2TiO5/C hollow spheres as visible-light driven photocatalysts10.1016/j.matdes.2020.108928 ↗
26. Non-hydrolytic sol-gel synthesis of BaTiO3 nano-powder: effect of calcination temperature and modified titanium source on particles
27. Review on strategies toward efficient piezocatalysis of BaTiO3 nanomaterials for wastewater treatment through harvesting vibration energy10.1016/j.nanoen.2023.108507 ↗
28. Phase content, tetragonality, and crystallite size of nanoscaled barium titanate synthesized by the catecholate process: effect of calcination temperature10.1016/S0955-2219(02)00071-7 ↗
29. Preparation, structure and supercapacitance of bonded carbon nanofiber electrode materials10.1016/j.carbon.2011.02.005 ↗
30. Entropy-change measurement of electrocaloric effect of BaTiO3 single crystal10.1002/pssa.201127695 ↗
31. Nondestructive prediction of isoflavones and oligosaccharides in intact soybean seed using fourier transform near-infrared (FT-NIR) and fourier transform infrared (FT-IR) spectroscopic techniques10.3390/foods11020232 ↗
32. How do H-bonding interactions control viscoelasticity and thixotropy of molecular gels? Insights from mono-, di-and tri-hydroxymethylated alkanamide gelators10.1016/j.jcis.2016.10.008 ↗
33. Comparison of supramolecular hydrogen bonded liquid crystals10.1080/01411594.2011.601409 ↗
34. Barium titanate sols prepared by a diol-based sol-gel route10.1016/j.jnoncrysol.2004.12.008 ↗
35. Simple hydrothermal synthesis and photocatalytic performance of coral-like BaTiO3 nanostructures10.1039/C4RA13642J ↗
36. Piezo-photocatalytic degradation of organic pollutant by a novel BaTiO3-NiO composite10.1140/epjp/s13360-023-04029-7 ↗
37. Ferroelectric Fe-Cr Co-doped BaTiO3 nanoparticles for the photocatalytic oxidation of azo dyes10.1021/acsanm.9b00336 ↗
38. Impact of oxygen vacancy on piezo-photocatalytic catalytic activity of barium titanate10.1016/j.apsusc.2023.156794 ↗
39. Evidence for oxygen vacancy inducing spontaneous normal-relaxor transition in complex perovskite ferroelectrics10.1063/1.2125110 ↗
40. Colossal permittivity with ultra-wide temperature stability in Bi+ ca co-doped BaTiO310.1016/j.jmat.2024.03.019 ↗
41. Engineering carrier dynamics in halide perovskites by dynamical lattice distortion10.1002/advs.202300386 ↗
42. Piezoelectric effect-assisted TiO2/BaTiO3 bicomponent for enhanced photocatalytic degradation of xanthate
43. Boosting tetracycline degradation of BaTiO3-based piezo-catalysts via modulating phase boundary and band structure10.1016/j.jcis.2024.03.191 ↗
44. Influence of pH values on the surface and properties of BCZT nanopowders synthesized via sol-gel auto-combustion method10.1016/j.surfcoat.2016.03.091 ↗
45. Non-hydrolytic sol-gel synthesis of BaTiO3 nano-powder: effect of calcination temperature and modified titanium source on particles
46. Piezophototronic effect in enhancing charge carrier separation and transfer in ZnO/BaTiO3 heterostructures for high-efficiency catalytic oxidation10.1016/j.nanoen.2019.104127 ↗
47. Construction and embedding of oxygen vacancies in organic-inorganic S-scheme heterojunctions for optimizing the photocatalytic degradation performance of PDI-Nb/BiVO4 towards antibiotics
48. Electronic structure and optical properties of monoclinic HfO2 with oxygen vacancy10.1016/S1875-5372(13)60093-4 ↗
49. Improved piezo-photocatalysis performance of Ba1-xSrxTiO3 nano-podwers via synergistically optimizing phase ratio, defects and polarization10.1016/j.jallcom.2024.178348 ↗
50. BiVO4/Bi4Ti3O12 heterojunction enabling efficient photocatalytic reduction of CO2 with H2O to CH3OH and CO10.1016/j.apcatb.2020.118876 ↗
51. Effect of controlled oxygen vacancy on H2-production through the piezocatalysis and piezophototronics of ferroelectric R3C ZnSnO3 nanowires
52. Analysis of point defects in polycrystalline BaTiO3 by electron paramagnetic resonance10.1016/S0022-3697(02)00454-7 ↗
53. Bimetal doping enhanced polarization electric field in BiFeO3 for piezocatalytic U(Ⅵ) reduction and hydrogen production10.1016/j.apcatb.2025.125113 ↗
54. Removal of multifold heavy metal contaminations in drinking water by porous magnetic Fe2O3@AlO(OH) superstructure10.1039/C2TA00594H ↗
55. Engineering strontium titanate-based photocatalysts for green hydrogen generation: recent advances and achievements10.1016/j.apcatb.2023.123383 ↗
56. Enhanced catalytic activity of Molar-like BaTiO3 by oxygen vacancies10.1016/j.ceramint.2023.09.332 ↗
57. Pyro-catalytic hydrogen evolution by Ba0.7Sr0.3TiO3 nanoparticles: harvesting cold-hot alternation energy near room-temperature10.1039/C8EE01016A ↗
58. Y. Zheng, M. Cheng, X. Wu, S. Zhang, Z. Liu, Y. Li, W. Shao, Q. Lin, J. Tan, S. Gao, Y. Zhang, W. Ye, Sm-doped (1 –.
59. Pb(Mg1/3Nb2/3)O3-xPbTiO3 nanostructures for piezocatalytic dye degradation10.1021/acsanm.1c02886 ↗
60. Application of a piezo-photocatalytic thin film (FTO/BaTiO3/SnO2) for enhanced degradation of organic pollutants and disinfection of wastewater10.1016/j.ceramint.2022.10.251 ↗
61. Recent advances and innovations in the piezoelectrochemical process for energy and the environment: a review10.1016/j.est.2024.110576 ↗
62. Directing charge transfer in a chemical‐bonded BaTiO3@ReS2 Schottky heterojunction for piezoelectric enhanced photocatalysis