journal article·2009-02

Selective growth of tensily strained Si1−yCy films on patterned Si substrates

A. Gouyé, F. Hüe, A. Halimaoui, O. Kermarrec, Y. Campidelli, M.J. Hÿtch, F. Houdellier, A. Claverie, D. Bensahel

Publisher page

Abstract

Advanced structures with poly-Si gates, Si3N4 spacers, and shallow trench isolation (STI) areas were used for elaborating the selective growth of Si1−yCy films into recessed source and drain (S/D). Selective Si1−yCy films were grown by repeated cycles consisting of two distinct steps: a non-selective CVD growth of Si1−yCy layers, and a chemical vapor etching with hydrochloric gas. This cyclic deposition/etching process has been experimented at 600 °C with a methylsilane/(methylsilane+trisilane+hydrogen) mass flow ratio (SiCH6 MFR) equal to 2.8×10−4 used for Si0.99C0.01 film deposition. Regarding etching step, a pure HCl gas/(hydrogen) mass flow ratio (HCl MFR) was about 4.3×10−1. We should note that the poly-crystalline Si1−yCy layers are etched more rapidly than the mono-crystalline layers. The etching rate ratio between poly and mono areas induces the capability, by cyclic process, to remove the deposited poly-crystalline Si1−yCy layers on the dielectric areas (STI, spacers) selectively versus the recessed mono-crystalline Si1−yCy layers. A global time process, of about 3 h, resulted in 50 nm thick Si0.99C0.01 films selectively grown into recessed S/D. The new TEM technique of dark-field holography was used to determine a mapping of the strain at transistor level (within Si channel among S/D). The tensile stress of about 0.2 GPa has been measured within Si channel (300 nm length) among recessed Si0.985C0.015 films.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Silicon Nanostructures and Photoluminescence · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. Ang · IEDM Tech Dig · 2005 · 503
2. Ang · Symp VLSI Technol Dig Tech Pap · 2006 · 6610.1109/VLSIT.2006.1705219 ↗
3. Ang · Appl Phys Lett · 2005 · 86 · 09310210.1063/1.1871351 ↗
4. Berti · Appl Phys Lett · 1998 · 72 · 160210.1063/1.121127 ↗
5. Olesinski · Bull Alloy Phase Diagr · 1984 · 5 · 48610.1007/BF02872902 ↗
6. Tersoff · Phys Rev Lett · 1995 · 74 · 508010.1103/PhysRevLett.74.5080 ↗
7. Simon · Phys Rev B · 1996 · 54 · 1055910.1103/PhysRevB.54.10559 ↗
8. Cherkashin N, Gouyé A, Hüe F, Houdellier F, Hÿtch MJ, Snoeck E, et al. MRS 2007 Fall Proceedings 1026-C07-03.10.1557/PROC-1026-C07-03 ↗
9. Lavéant · Mater Sci Eng B · 2002 · 89 · 24110.1016/S0921-5107(01)00794-2 ↗
10. Hÿtch MJ, Snoeck E, Houdellier F, Hüe F. Procédé et système de mesure de déformations à l’échelle nanométrique. French Patent Application FR No. 07 06711.
11. Hÿtch · Nature · 2008 · 453 · 108610.1038/nature07049 ↗
12. Bauer · ECS Trans · 2006 · 3 · 18710.1149/1.2355808 ↗
13. Yeo · Appl Phys Lett · 2005 · 86 · 02310310.1063/1.1846152 ↗