State-of-the-art passivation strategies of c-Si for photovoltaic applications: A review
Source abstract
Abstract
The carrier recombination is a major bottleneck in enhancing the power conversion efficiency of first-generation solar cells. As a remedy, passivation minimizes the recombination at the surface and bulk by either neutralizing the dangling bonds or creating a field-effect. The review describes the evolution of the different cell structures based on passivation and classifies the passivation schemes according to the mechanism. The two ways of passivating the crystalline Si are either by reducing the minority carrier concentration at the surface or decreasing the intermediate density of states. Field-effect passivation is achieved by creating an electric field at the surface of Si to repel the minority carriers. The paper compares the typical and emerging dielectric layers in terms of substrate compatibility, effectiveness, interface qualities, and carrier-selective emitters for contact passivation. The effective lifetime of solution-based chemical passivation is compared for various electrolytes. In addition to surface passivation, it describes the advanced hydrogen passivation for bulk defects, such as shielded-hydrogen passivation and laser passivation. Further, the recent developments in the passivation strategies for trending solar cell architectures are discussed from the perspective of challenges.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Integrated Circuits and Semiconductor Failure Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Solar PV policy framework of Indian States: overview, pitfalls, challenges, and improvements10.1016/j.ref.2018.07.001 ↗
2. Silicon heterojunction solar cell with interdigitated back contacts for a photoconversion efficiency over 26%
3. Solar cell efficiency tables (Version 60)10.1002/pip.3595 ↗
4. 2013 · 1
5. High-efficiency amorphous silicon solar cells: impact of deposition rate on metastability10.1063/1.4907001 ↗
6. Solar cell efficiency tables (version 49)10.1002/pip.2855 ↗
7. High-efficiency crystalline silicon solar cells: status and perspectives10.1039/C5EE03380B ↗
8. Crystalline silicon solar cells: better than ever10.1038/nenergy.2017.67 ↗
9. Restructured porous silicon for solar photovoltaic: a review10.1016/j.micromeso.2019.109619 ↗
10. Integration of silicon nanowires in solar cell structure for efficiency enhancement: a review10.1016/j.jmat.2018.11.007 ↗
11. Transfer of vertically aligned silicon nanowires array using sacrificial porous silicon layer
12. Solar cell fill factors: general graph and empirical expressions10.1016/0038-1101(81)90062-9 ↗
13. Benda · 2018 · 151
14. Towards the efficiency limits of silicon solar cells: how thin is too thin?10.1016/j.solmat.2015.06.054 ↗
15. Silicon solar cells: evolution, high-efficiency design and efficiency enhancements10.1088/0268-1242/8/1/001 ↗
16. Next-generation multi-crystalline silicon solar cells: diamond-wire sawing, nano-texture and high efficiency10.1016/j.solmat.2015.05.030 ↗
17. A large-volume manufacturing of multi-crystalline silicon solar cells with 18.8% efficiency incorporating practical advanced technologies10.1039/C6RA05765A ↗
18. Development of the PERC solar cell10.1109/JPHOTOV.2019.2899460 ↗
19. Optimization of Silicon Nitride (SiNX) Anti-reflective coating (arc) and passivation layers using industrial plasma enhanced chemical vapor deposition (pecvd) for perc type solar cells
20. A roadmap toward 24% efficient PERC solar cells in industrial mass production10.1109/JPHOTOV.2017.2749007 ↗
21. Development of large-area bifacial interdigitated-back-contact (IBC) solar cell with industrial production environment
22. Silicon solar cells: toward the efficiency limits
23. Review of status developments of high-efficiency crystalline silicon solar cells
24. Towards 28 %-efficient Si single-junction solar cells with better passivating POLO junctions and photonic crystals
25. Optimization of TOPCon structured solar cell using AFORS-HET10.1007/s42341-020-00220-0 ↗
26. Evolution of PERC from Al-BSF: optimization based on root cause analysis10.1007/s00339-020-03747-4 ↗
27. The passivated emitter and rear cell (PERC): from conception to mass production10.1016/j.solmat.2015.06.055 ↗
28. Efficiency roadmap for evolutionary upgrades of PERC solar cells by TOPCon: impact of parasitic absorption10.1109/JPHOTOV.2019.2957642 ↗
29. Fundamentals, present status and future perspective of TOPCon solar cells: a comprehensive review
30. Toward the practical limits of silicon solar cells10.1109/JPHOTOV.2014.2350695 ↗
31. Optimization of tunnel-junction IBC solar cells based on a series resistance model10.1016/j.solmat.2019.110036 ↗
32. Development of TOPCon tunnel-IBC solar cells with screen-printed fire-through contacts by laser patterning10.1016/j.solmat.2020.110834 ↗
33. Improved parameterization of Auger recombination in silicon10.1016/j.egypro.2012.07.034 ↗
34. Radiative recombination in silicon p-n junctions10.1002/pssb.19690360132 ↗
35. An improved approach to the Shockley-Read-Hall recombination in inhomogeneous fields of space-charge regions10.1063/1.350929 ↗
36. A contactless minority lifetime probe of heterostructures, surfaces, interfaces and bulk wafers10.1016/0038-1101(92)90230-A ↗
37. Unusually low surface-recombination velocity on silicon and germanium surfaces10.1103/PhysRevLett.57.249 ↗
38. Contactless determination of current-voltage characteristics and minority-carrier lifetimes in semiconductors from quasi-steady-state photoconductance data10.1063/1.117723 ↗
39. Carrier-diffusion corrected J0-analysis of charge carrier lifetime measurements for increased consistency10.1016/j.solmat.2015.06.043 ↗
40. Analysis of the interaction of a laser pulse with a silicon wafer: determination of bulk lifetime and surface recombination velocity
41. Dimensionless solution of the equation describing the effect of surface recombination on carrier decay in semiconductors10.1063/1.357521 ↗
42. Dielectric surface passivation for silicon solar cells: a review
43. Temporary surface passivation for characterisation of bulk defects in silicon: a review10.1002/pssr.201700243 ↗
44. Statistics of the recombinations of holes and electrons10.1103/PhysRev.87.835 ↗
45. Determination of Si-SiO2 interface recombination parameters using a gate-controlled point-junction diode under illumination10.1109/16.2441 ↗
46. On effective surface recombination parameters10.1063/1.4886595 ↗
47. On the determination of the emitter saturation current density from lifetime measurements of silicon devices10.1002/pip.2167 ↗
48. Extracting surface saturation current density from lifetime measurements of samples with metallized surfaces
49. Carrier-diffusion corrected J0-analysis of charge carrier lifetime measurements for increased consistency10.1016/j.solmat.2015.06.043 ↗
50. Atomic layer deposition of vanadium oxide as hole-selective contact for crystalline silicon solar cells10.1002/aelm.202000467 ↗
51. Ultralow surface recombination of c-Si substrates passivated by plasma-assisted atomic layer deposited Al2O310.1063/1.2240736 ↗
52. Kinetics of a-Si:H bulk defect and a-Si:H/c-Si interface-state reduction10.1103/PhysRevB.85.113302 ↗
53. Exploring the practical efficiency limit of silicon solar cells using thin solar-grade substrates10.1039/D0TA04575F ↗
54. Comparison of sputtering and atomic layer deposition based ultra-thin alumina protective layers for high temperature surface acoustic wave devices10.1016/j.jmrt.2021.10.081 ↗
55. Corona charge in SiO2: kinetics and surface passivation for high efficiency silicon solar cells10.1016/j.egypro.2016.07.090 ↗
56. Long term stability of c-Si surface passivation using corona charged SiO210.1016/j.apsusc.2017.03.204 ↗
57. SiO2 surface passivation layers – a key technology for silicon solar cells10.1016/j.solmat.2018.04.029 ↗
58. Excellent passivation of highly doped p -type Si surfaces by the negative-charge-dielectric Al2O310.1063/1.2784168 ↗
59. High efficiency n-type Si solar cells on Al2O3-passivated boron emitters10.1063/1.2945287 ↗
60. Hydrogen passivation of carbon P b like centers at the 3C- and 4H-SiCSiO2 interfaces in oxidized porous SiC10.1063/1.2179128 ↗
61. Carrier trap passivation in multicrystalline Si solar cells by hydrogen from SiNx:H layers10.1063/1.2219142 ↗
62. Shielded hydrogen passivation - a novel method for introducing hydrogen into silicon
63. Review of advanced hydrogen passivation for high efficient crystalline silicon solar cells10.1016/j.mssp.2018.01.019 ↗
64. Demonstration of c-Si solar cells with gallium oxide surface passivation and laser-doped gallium p+ regions
65. Electrical and chemical characterization of chemically passivated silicon surfaces
66. Chemical modification and patterning of iodine-terminated silicon surfaces using visible light10.1021/jp013523h ↗
67. Wet-chemical treatment for improved surface passivation of textured silicon heterojunction solar cells
68. Delay of regeneration by adding aluminum in boron-doped crystalline Si
69. Development and prospects of surface passivation schemes for high-efficiency c-Si solar cells10.1016/j.solener.2018.03.025 ↗
70. Life-cycle assessment of p-type multi-Si back surface field (BSF) solar module in China of 201910.1016/j.solener.2019.12.018 ↗
71. Analysis of aluminum back surface field at different wafer specifications in crystalline silicon solar cells10.1016/j.cap.2016.05.016 ↗
72. Surface passivation of crystalline silicon solar cells: present and future10.1016/j.solmat.2018.06.047 ↗
73. A unified mobility model for device simulation-I. Model equations and concentration dependence10.1016/0038-1101(92)90325-7 ↗
74. A unified mobility model for device simulation-II. Temperature dependence of carrier mobility and lifetime10.1016/0038-1101(92)90326-8 ↗
75. Finite-temperature full random-phase approximation model of band gap narrowing for silicon device simulation10.1063/1.368545 ↗
76. Electronic and chemical properties of the c-Si/Al2O3 interface10.1063/1.3587227 ↗
77. Impact of illumination level and oxide parameters on Shockley-Read-Hall recombination at the Si-SiO2 interface10.1063/1.350782 ↗
78. Silicon surface passivation by atomic layer deposited Al2 O 310.1063/1.2963707 ↗
79. On the c-Si surface passivation mechanism by the negative-charge-dielectric Al2 O310.1063/1.3021091 ↗
80. Advanced modeling of the effective minority carrier lifetime of passivated crystalline silicon wafers10.1063/1.4749572 ↗
81. Influence of the oxidant on the chemical and field-effect passivation of Si by ALD Al2 O310.1149/1.3501970 ↗
82. An investigation of Si-SiO2 interface charges in thermally oxidized (100), (110), (111), and (511) silicon10.1063/1.347042 ↗
83. Fixed charge density in silicon nitride films on crystalline silicon surfaces under illumination
84. Al2O3/TiO2 stack layers for effective surface passivation of crystalline silicon10.1063/1.4825258 ↗
85. Low temperature processed hafnium oxide: structural and electrical properties10.1016/j.mssp.2006.10.031 ↗
86. Recombination at textured silicon surfaces passivated with silicon dioxide
87. Passivation of textured silicon wafers: influence of pyramid size distribution, a-Si:H deposition temperature, and post-treatment
88. A synergetic effect of surface texture and field-effect passivations on improving Si solar cell performance10.1016/j.physe.2015.03.025 ↗
89. 20.8% industrial PERC solar cell: ALD Al2O3 rear surface passivation, efficiency loss mechanisms analysis and roadmap to 24%10.1016/j.solmat.2016.11.018 ↗
90. A new back surface passivation stack for thin crystalline silicon solar cells with screen-printed back contacts
91. Control of solution wettability on fine-textured crystalline silicon surface to obtain high-quality passivation for solar cells10.1063/1.5085434 ↗
92. Firing stability of SiNy/SiNx stacks for the surface passivation of crystalline silicon solar cells10.1016/j.solmat.2011.09.051 ↗
93. Ultrathin titanium dioxide nanolayers by atomic layer deposition for surface passivation of crystalline silicon10.1109/JPHOTOV.2016.2545404 ↗
94. Area-selective ALD of TiO2 nanolines with electron-beam lithography10.1021/jp5037662 ↗
95. Field-effect passivation of the SiO2-Si interface10.1063/1.370784 ↗
96. High quality passivation for heterojunction solar cells by hydrogenated amorphous silicon suboxide films10.1063/1.2837192 ↗
97. Very low bulk and surface recombination in oxidized silicon wafers10.1088/0268-1242/17/1/306 ↗
98. Models of Si-SiO2 interface reactions10.1088/0268-1242/4/12/003 ↗
99. Influence of annealing and Al 2O 3 properties on the hydrogen-induced passivation of the Si/SiO2 interface10.1063/1.4709729 ↗
100. The influence of thermal SiO[sub 2] surface constitution on the adherence of photoresists10.1149/1.2411384 ↗