Material removal characteristic of single abrasive scratching 4H–SiC crystal with different crystal surface
Source abstract
Abstract
Silicon carbide (SiC) crystal is a third-generation semiconductor material, which is widely used in the fields of radio frequency components, aerospace, new energy vehicles, etc. The anisotropy of 4H–SiC leads to differences in material removal characteristics of different crystal surfaces, which influences the design of process parameters for SiC crystal polishing. A model of single abrasive scratching 4H–SiC crystal was established using molecular dynamics. The effect of scratching speed and depth on the material removal characteristics and the wafer surface morphology was investigated when a single abrasive scratches the C surface and Si surface. Scratching experiments were conducted to verify the model by measuring scratch cross-sectional area, scratch profile, and surface roughness. The simulation results reveal that compared to the Si surface, the distribution range of high hydrostatic stress of the C surface is less, resulting in fewer amorphous atoms and easier dislocation, which means the C surface is more favorable for getting plastic removal and obtaining better surface quality. The experiment data suggested that the C surface has a smaller surface roughness and a friction coefficient, and the cross-sectional area of the scratch is larger than that of the Si surface. Under low-speed conditions, the influence of anisotropy is more pronounced. Consistent with the simulation result, the material removal characteristics of the C surface are better than those of the Si surface when single abrasive scratching 4H–SiC crystal.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Application of SiC power electronic devices in secondary power source for aircraft10.1016/j.rser.2016.12.035 ↗
2. Review of Silicon Carbide power devices and their applications10.1109/TIE.2017.2652401 ↗
3. Recent progress in synthesis, properties and potential applications of SiC nanomaterials10.1016/j.pmatsci.2015.01.003 ↗
4. Electron mobility in bulk n-doped SiC-polytypes 3C-SiC, 4H-SiC, and 6H-SiC: a Comparison10.1134/S1063782621070150 ↗
5. Material removal mechanism of 6H-SiC studied by nano-scratching with Berkovich indenter10.1007/s00339-016-9802-7 ↗
6. Removal mechanism of 4H- and 6H-SiC substrates (0001 and 0001-) in mechanical planarization machining10.1177/0954405417718595 ↗
7. Investigation of the anisotropy of 4H-SiC materials in nanoindentation and scratch experiments10.3390/ma15072496 ↗
8. Material removal characteristics of single-crystal 4H-SiC based on varied-load nanoscratch tests10.1186/s10033-023-00944-z ↗
9. Experimental and theoretical studies of the physicochemical and mechanical properties of multi-layered TiN/SiC films: temperature effects on the nanocomposite structure10.1016/j.compositesb.2018.01.004 ↗
10. Interfacial friction properties in diamond polishing process and its molecular dynamic analysis10.1016/j.diamond.2019.107546 ↗
11. Molecular simulation of the plastic deformation and crack formation in single grit grinding of 4H-SiC single crystal10.1016/j.ijmecsci.2023.108147 ↗
12. Study of deformation mechanism of structural anisotropy in 4H–SiC film by nanoindentation10.1016/j.mssp.2022.106671 ↗
13. Coupling effect on the removal mechanism and surface/subsurface characteristics of SiC during grinding process at the nanoscale10.1016/j.ceramint.2018.10.175 ↗
14. A molecular dynamics investigation into nanoscale scratching mechanism of polycrystalline silicon carbide10.1016/j.commatsci.2018.02.038 ↗
15. Molecular dynamics simulation of single-crystal 4H-SiC nano scratching with different scratching directions of the tool10.3390/cryst13071044 ↗
16. Study on nanomechanical properties of 4H-SiC and 6H-SiC by molecular dynamics simulations10.1016/j.ceramint.2019.07.214 ↗
17. Molecular dynamics simulation of the material removal in the scratching of 4H-SiC and 6H-SiC substrates10.1088/2631-7990/abc26c ↗
18. LAMMPS - a flexible simulation tool for particle-based materials modeling at the atomic, meso, and continuum scales10.1016/j.cpc.2021.108171 ↗
19. Visualization and analysis of atomistic simulation data with OVITO-the Open Visualization Tool10.1088/0965-0393/18/1/015012 ↗
20. Modeling solid-state chemistry: interatomic potentials for multicomponent systems10.1103/PhysRevB.39.5566 ↗
21. Erratum: Modeling solid-state chemistry: interatomic potentials for multicomponent systems10.1103/PhysRevB.41.3248.2 ↗
22. Investigation on diamond damaged process during a single-scratch of single crystal silicon carbide
23. Global transition path search for dislocation formation in Ge on Si(001)10.1016/j.cpc.2016.04.001 ↗
24. Study on mechanical properties of single-crystal silicon carbide by nanoindentation10.4028/www.scientific.net/AMR.1136.549 ↗
25. Automated identification and indexing of dislocations in crystal interfaces