Solution-based flexible indium oxide thin-film transistors with high mobility and stability by selective surface modification
Source abstract
Abstract
Abstract Improved performances of solution-based flexible indium oxide (In2O3) thin-film transistors (TFTs) was achieved by introducing clear-cut edges of the active areas on substrate surfaces. Patterned areas for the In2O3 active regions were converted to hydrophilic by oxygen plasma treatment whereas the remaining areas between the active region patterns were converted to hydrophobic by transferring oligomer molecules from a partially cured polydimethylsiloxane (PDMS) mask. This way, In2O3 precursor could be settled only on the intended patterns for the active regions and therefore the active regions were formed with distinct edges and regular shapes. A model TFT prepared via this method exhibited significantly improved performances over a reference device prepared without the selective surface treatment in terms of threshold voltage (Vth), subthreshold swing (SS), saturation mobility (μsat), off-state current (Ioff), and bias-stress stability. Furthermore, the TFT exhibited good electrical stability under a bias stress and sustainable mechanical stability even at 10,000 cycles of bending tests at a radius of curvature of 5 mm. Such improvements were attributed to decreased trap state density at the channel/dielectric interface due to clear distinction of the active region edges and good interface properties, which also helped improving the mechanical stability under prolonged cyclic bending.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thin-Film Transistor Technologies · ZnO doping and properties · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. High-performance flexible thin-film transistors exfoliated from bulk wafer10.1021/nl302735f ↗
2. The status and perspectives of metal oxide thin-film transistors for active matrix flexible displays10.1088/0268-1242/26/3/034008 ↗
3. Wearable electronics and smart textiles: A critical review10.3390/s140711957 ↗
4. Wearable and flexible sensors for user-interactive health-monitoring devices10.1039/C8TB01063C ↗
5. Electronic skin: Achievements, issues and trends10.1016/j.protcy.2014.09.015 ↗
6. Wearable flexible sensors: A review10.1109/JSEN.2017.2705700 ↗
7. Wide bandgap BaSnO3 films with room temperature conductivity exceeding 104 Scm-110.1038/ncomms15167 ↗
8. Oxide-based thin film transistors for flexible electronics10.1088/1674-4926/39/1/011005 ↗
9. Improvement of dielectric flexibility and electrical properties of mechanically flexible thin film devices using titanium oxide materials fabricated at a very low temperature of 100 °c10.1016/j.jallcom.2014.12.061 ↗
10. Amorphous silicon TFTs and their applications10.1016/0167-9317(92)90416-O ↗
11. Area laser crystallized LTPS TFTs with implanted contacts for active matrix OLED displays10.1016/j.sse.2007.10.014 ↗
12. A solution-processed organic thin-film transistor backplane for flexible multiphoton emission organic light-emitting diode displays10.1109/LED.2015.2443184 ↗
13. An oxygen gettering scheme for improving device mobility and subthreshold swing of InGaZnO-based thin-film transistor10.1109/TNANO.2014.2332395 ↗
14. Facile and environmentally friendly solution-processed aluminum oxide dielectric for low-temperature, high-performance oxide thin-film transistors10.1021/am508775c ↗
15. Indium oxide thin-film transistors processed at low temperature via ultrasonic spray pyrolysis10.1021/am5072139 ↗
16. Sol-gel metal oxide dielectrics for all-solution-processed electronics10.1016/j.mser.2017.01.003 ↗
17. Device characteristics of amorphous indium-gallium-zinc-oxide channel capped with silicon oxide passivation layers10.1016/j.mssp.2016.03.020 ↗
18. Poly-Si TFT fabricated at 150 oC using ICP-CVD and excimer laser annealing10.1109/JPROC.2005.851535 ↗
19. Layer-controlled, wafer-scale, and conformal synthesis of tungsten disulfide nanosheets using atomic layer deposition10.1021/nn405194e ↗
20. All-solution-processed, transparent thin-film transistors based on metal oxides and single-walled carbon nanotubes10.1039/c2tc00405d ↗
21. Large-Scale precise printing of ultrathin sol-gel oxide dielectrics for directly patterned solution-processed metal oxide transistor arrays10.1002/adma.201502239 ↗
22. Low-temperature spray-deposited indium oxide for flexible thin-film transistors and integrated circuits10.1063/1.4914085 ↗
23. Carbon nanotubes for thin film transistor: Fabrication, properties, and applications10.1155/2013/627215 ↗
24. Enhancement of reliability and stability for transparent amorphous indium-zinc-tin-oxide thin film transistors10.1039/C6RA22423G ↗
25. All-sputtered, flexible, bottom-gate IGZO/Al2O3 bi-layer thin film transistors on PEN fabricated by a fully room temperature process10.1039/C7TC02068F ↗
26. Fast and slow transient charging of oxide semiconductor transistors
27. Inkjet-printed zinc tin oxide thin-film transistor10.1021/la901436p ↗
28. Precise patterning of large-scale TFT arrays based on solution-processed oxide semiconductors: A comparative study of additive and subtractive approaches
29. Chemical durability engineering of solution-processed oxide thin films and its application in chemically-robust patterned oxide thin-film transistors10.1039/C6TC04094B ↗
30. All-inkjet-printed thin-film transistors: Manufacturing process reliability by root cause analysis10.1038/srep33490 ↗
31. Direct patterning of sol–gel metal oxide semiconductor and dielectric films via selective surface wetting10.1039/C5RA04515K ↗
32. Patterning of amorphous-InGaZnO thin-film transistors by stamping of surface-modified polydimethylsiloxane10.1039/C6RA06264D ↗
33. Effect of softness of polydimethylsiloxane on the hydrophobicity of pillar-like patterned surfaces10.1039/C1SM06649H ↗
34. Low-temperature fabrication of high performance indium oxide thin film transistors10.1039/C5RA04145G ↗
35. Comparative passivation effect of ALD-driven HfO2 and Al2O3 buffer layers on the interface chemistry and electrical characteristics of Dy-based gate dielectrics10.1039/C8TC05736B ↗
36. Capacitance-voltage studies on enhancement-mode InGaAs metal-oxide-semiconductor field-effect transistor using atomic-layer-deposited Al2O3 gate dielectric10.1063/1.2217258 ↗
37. Fully solution-induced high performance indium oxide thin film transistors with ZrOx high-k gate dielectrics10.1039/C8RA02108B ↗
38. Inversion layer carrier concentration and mobility in 4H-SiC metal-oxide-semiconductor field-effect transistors10.1063/1.3484043 ↗
39. Charge trapping and detrapping characteristics in amorphous InGaZnO TFTs under static and dynamic stresses10.1088/0268-1242/24/1/015013 ↗
40. Electrical-stress-induced threshold voltage instability in solution-processed ZnO thin-film transistors: An experimental and simulation study10.1109/TED.2011.2138143 ↗
41. Resolution of amorphous silicon thin‐film transistor instability mechanisms using ambipolar transistors Appl
42. Improvement of negative bias stress stability in Mg0.03 Zn0.97 O thin-film transistors10.1109/LED.2015.2459600 ↗
43. Crack initiation patterns at electrode edges in multilayer ferroelectric actuators10.1088/0964-1726/21/9/094011 ↗
44. Failure resistance of amorphous silicon transistors under extreme in-plane strain10.1063/1.125174 ↗