Nanoindentation of GaAs/AlAs distributed bragg reflector grown on GaAs substrate
Source abstract
Abstract
Nanoindentation was used to investigate the mechanical parameters of GaAs/AlAs Distributed Bragg Reflectors. Such heterostructures are commonly employed in surface-emitting optoelectronic devices as LED or lasers. The investigation was carried for fully pseudomorphic AlAs/GaAs heterostructures and compared with bulk GaAs. The nanoindentation tests with sharp (Vickers) and spherical tip were conducted, and pop-in events were observed. We show that below pop-in load, the response of both materials is similar i.e., elastic parameters of the heterostructure and GaAs are practically the same. However, the pop-in events take place at higher loads for heterostructures than for GaAs. This in turn indicates that the heterostructure has a higher resistance to damage. For both materials, the pop-in load depends on loading rate. The possible mechanisms of pop-in are discussed. In the elastic-plastic stage (after pop-in), the heterostructure exhibits lower stiffness and lower hardness than GaAs does. The surface cracks that are generated in the heterostructure during the indentation test continue to grow even when the load is removed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · GaN-based semiconductor devices and materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Indentation hardnesses of semiconductors and a scaling rule10.1080/0950083021000022288 ↗
2. Nakamura · 2000
3. Nanoindentation of Si, GaP, GaAs and ZnSe single crystals10.1088/0022-3727/36/1/102 ↗
4. Nanoindentation cracking in gallium arsenide: Part I. In situ SEM nanoindentation10.1557/jmr.2013.252 ↗
5. Nanoindentation cracking in gallium arsenide: Part II. TEM investigation10.1557/jmr.2013.275 ↗
6. Dislocations and cracks at Vickers indentations in GaN and GaAs bulk crystals10.1002/pssc.201084020 ↗
7. Anisotropy of crack and dislocation formation in GaAs
8. Elastic and plastic properties of InxGa1−xAs10.1088/0022-3727/41/20/205406 ↗
9. 2013
10. 2010
11. Faist · 2013
12. Ultimate High Power Operation of 9xx-nm Single Emitter Broad Stripe Laser Diodes
13. DʹAsaro · 2005 · vol. 39 · 62
14. Quantum design strategy pushes high-power verticalexternal-cavity surface-emitting lasers beyond 100W10.1002/lpor.201200034 ↗
15. Progress in high-power continuous-wave quantum cascade lasers10.1364/AO.56.000H15 ↗
16. Dicing of gallium–arsenide high performance laser diodes for industrial applications Part I. Scratching operation10.1016/j.jmatprotec.2007.06.055 ↗
17. Dicing of gallium–arsenide high performance laser diodes for industrial applications Part II. Cleavage operation10.1016/j.jmatprotec.2007.06.054 ↗
18. Determination of hardness and Young’s modulus for important III–V compound semiconductors10.1016/j.tsf.2013.08.079 ↗
19. Supernormal hardness increase of dilute Ga(As, N) thin films10.1063/1.4978019 ↗
20. Plastic behavior of an AlAs/GaAs superlattice with a short period10.1080/09500830010033314 ↗
21. Stored elastic energy influence on the elastic–plastic transition of GaAs structures10.1557/jmr.2011.296 ↗
22. Subsurface deformations induced by a Vickers indenter in GaAs/AlGaAs superlattice10.1023/A:1014971619783 ↗
23. Strength enhancement of compensated strained InP/AlP superlattice10.1002/1521-396X(200201)189:1<175::AID-PSSA175>3.0.CO;2-I ↗
24. Adachi · 2009
25. Onset of plasticity in InxGa1-xAs multilayers10.1016/j.actamat.2009.08.056 ↗
26. A different type of indentation size effect10.1016/j.scriptamat.2008.07.026 ↗
27. Analysis of GaAs substrate removal etching with citric acid : H 2O2 and NH 4 OH : H 2O2 for application to compliant substrates10.1149/1.1837422 ↗
28. Advances in selective wet oxidation of AlGaAs alloys10.1109/2944.640645 ↗
29. Nanoindentation experiments with different loading rate distinguish the mechanism of incipient plasticity10.1063/1.4818260 ↗
30. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
31. Adachi · 1993