Study on the p-type ohmic contact in GaAs-based laser diode
Source abstract
Abstract
Abstract In this paper, the p-GaAs ohmic contact, which is important to improve the conversion efficiency and long-term reliability of high-power optoelectronic devices, was studied. The p-GaAs layer was grown by metal-organic chemical vapor deposition (MOCVD) with a hole concentration of 1.2×1020cm-3, and the metal electrode was fabricated by E-beam evaporation technology based on Ti/Pt/Au metal system. The CTLM tests showed that the p-GaAs contacts were both typical ohmic contact before and after annealing, and the smallest specific contact resistivity of 4.8×10-6Ω·cm2 was obtained after annealing, which mainly due to the direct tunneling effect on the highly doped p-GaAs surface and the formed non-alloy ohmic contact. SEM and EDX analysis showed that the annealing processes used in the n-GaAs metal alloy for laser diode had a little influence on the surface morphology and inter-diffusion of As, Pt, Au elements, while it enhanced the inter-diffusion of Ga and Ti in the contact.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor Quantum Structures and Devices · Semiconductor materials and interfaces · Semiconductor Lasers and Optical Devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. High wall-plug efficiency 808-nm laser diodes with a power up to 30.1 W10.1088/1674-4926/41/3/032901 ↗
2. Low-resistance p-type ohmic contacts for high-power InGaAs/GaAs-980 nm CW semiconductor lasers10.1016/j.vacuum.2008.01.006 ↗
3. Transmission electron microscopy characterization of Au/Pt/Ti/Pt/GaAs ohmic contacts for high power GaAs/InGaAs semiconductor lasers10.1111/j.1365-2818.2009.03258.x ↗
4. Ohmic performance comparison for Ti/Ni/Au and Ti/Pt/Au on InAs/graded InGaAs/GaAs layers10.1016/S0254-0584(99)00208-4 ↗
5. Formation of ohmic contacts to P-GaAs
6. Influences of annealing parameters on the ohmic contact property of p-type GaAs
7. Pt/Ti ohmic contacts to ultrahigh carbon-doped p-GaAs formed by rapid thermal processing10.1063/1.102605 ↗
8. Non-alloyed, refractory metal contact optimization with shallow implantations of Zn and Mg10.1016/0040-6090(94)90373-5 ↗
9. Nonspiking ohmic contact to p-GaAs by solid‐phase regrowth10.1063/1.346990 ↗
10. Study on the ohmic contact property of p-type GaAs
11. The effects of contact size and non-zero metal resistance on the determination of specific contact resistance10.1016/0038-1101(82)90036-3 ↗