A review on additive manufacturing of piezoelectric ceramics: From feedstock development to properties of sintered parts
Source abstract
Abstract
Piezoelectric ceramics are extensively used in several engineering applications in the field of sensors, actuators, energy harvesting , biomedical, and many more. Traditional ways of manufacturing piezoelectric devices result in better piezoelectric/ferroelectric performance. However, they are restricted to only simple shapes. With the widespread influence of additive manufacturing (AM), it is now possible to fabricate complex structures which were not possible by conventional technologies. In order to fabricate such complex structures with precision, it is necessary to understand in detail the factors influencing the feedstock preparation and the challenges associated with different AM technologies . With an emphasis on the most commonly used AM techniques (direct ink writing, fused filament fabrication , vat photopolymerization , binder jetting , and selective laser sintering) for fabricating ceramic parts, this review paper intends to provide a deep insight into the factors affecting the feedstock preparation as well as post-processing conditions required to develop a high-performance piezoelectric device. The summarized tables detailing the various piezoelectric ceramic compositions and additives or ingredients used in formulating a printable feedstock, along with the optimum printing and post-processing conditions, will aid the readers in developing their own printable formulations and determining the best post-processing parameters to achieve the best performance out of the fabricated piezoelectric device. The advantages and disadvantages of the AM technologies are analyzed with specific reference to piezoceramic materials and the remaining challenges that require further research are emphasized. Furthermore, with the ongoing and continuous developments in additive manufacturing of piezoelectric materials , it is expected that such advancements will progressively transition towards commercialization, with the ultimate goal of widely incorporating additively manufactured devices into practical applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Additive Manufacturing and 3D Printing Technologies · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. World – World Energy Balances: Overview – Analysis - IEA, (n.d.).
2. Progress and challenges of 3D-printing technologies in the manufacturing of piezoceramics10.1016/j.ceramint.2020.12.243 ↗
3. A review of ceramic, polymer and composite piezoelectric materials
4. Ferroelectric ceramics: History and technology10.1111/j.1151-2916.1999.tb01840.x ↗
5. Lead-free piezoelectrics—The Environmental and regulatory issues10.1557/mrs.2018.154 ↗
6. EU, DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment, Off. J. Eur. Union (2003) 12–25, - Google Search, (n.d.).
7. Directive - 2002/96 - EN - EUR-Lex, (n.d.). https://doi.org/http://data.europa.eu/eli/dir/2002/96/oj.
8. Lead-free piezoelectric ceramicS: Alternatives for PZT10.1007/s10832-007-9047-0 ↗
9. Lead-free piezoceramics10.1038/nature03028 ↗
10. Lead-free at last
11. Transferring lead-free piezoelectric ceramics into application10.1016/j.jeurceramsoc.2014.12.013 ↗
12. BaTiO3-based piezoelectrics: fundamentals, current status, and perspectives10.1063/1.4990046 ↗
13. Grain-size-induced ferroelectricity in NaNbO310.1016/j.actamat.2016.12.049 ↗
14. Intrinsic and extrinsic size effects in fine-grained morphotropic-phase-boundary lead zirconate titanate ceramics10.1111/j.1151-2916.1998.tb02389.x ↗
15. Grain size effects in donor doped lead zirconate titanate ceramics10.1063/5.0029659 ↗
16. Uncovering the symmetry of the induced ferroelectric phase transformation in polycrystalline barium titanate10.1063/5.0068703 ↗
17. Inverse domain-size dependence of piezoelectricity in ferroelectric crystals10.1002/adma.202105071 ↗
18. Fundamentals of Ferroelectric Materials
19. Piezoelectric properties of BaTiO3 ceramics with high performance fabricated by microwave sintering10.1143/JJAP.45.7405 ↗
20. Domain wall displacement is the origin of superior permittivity and piezoelectricity in BaTiO 3 at intermediate grain sizes10.1002/adfm.201301913 ↗
21. Development of lead-free BaTiO3 ceramics possessing enhanced piezoelectric properties10.1002/ecj.10418 ↗
22. Unfolding grain size effects in barium titanate ferroelectric ceramics
23. Grain-size effects on the ferroelectric behavior of dense nanocrystalline BaTiO3 ceramics10.1103/PhysRevB.70.024107 ↗
24. Critical size and anomalous lattice expansion in nanocrystalline particles10.1103/PhysRevB.62.3065 ↗
25. Texture-engineered ceramics—Property enhancements through crystallographic tailoring10.1557/jmr.2017.207 ↗
26. S. Wada, K. Takeda, T. Muraishi, H. Kakemoto, T. Tsurumi, T. Kimura, Preparation of [110] grain oriented barium titanate ceramics by templated grain growth method and their piezoelectric properties, Japanese J. Appl. Physics, Part 1 Regul. Pap. Short Notes Rev. Pap. 46 (2007) 7039–7043. https://doi.org/10.1143/JJAP.46.7039/XML.10.1143/JJAP.46.7039 ↗
27. Fabrication of (111)-oriented tetragonal BaTiO3 ceramics by an electrophoretic deposition in a high magnetic field10.14723/tmrsj.40.223 ↗
28. Textured BaTiO3 by templated grain growth and electrophoretic deposition10.1007/s10853-015-9322-4 ↗
29. Texturing of hydrothermally synthesized BaTiO3 in a strong magnetic field by slip casting10.1016/j.ceramint.2015.12.073 ↗
30. J.F. Fernández, P. Durán, C. Moure, Microstructure development of tape casting BaTiO3 ceramics, Http://Dx.Doi.Org/10.1080/00150199208223348 127 (2011) 65–70. https://doi.org/10.1080/00150199208223348.10.1080/00150199208223348 ↗
31. Dielectric Properties of Electrophoretically Deposited and Isothermally Pressed BaTiO3 Thick Films10.1111/j.1551-2916.2008.02385.x ↗
32. Piezoelectric ceramics by powder injection molding
33. Additive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities10.1111/jace.13700 ↗
34. The Effect of Grinding Conditions on Lead Zirconate Titanate Machinability10.1016/S0955-2219(98)00426-9 ↗
35. Additive Manufacturing of Piezoelectric Materials10.1002/adfm.202005141 ↗
36. Additive manufacturing of advanced ceramic materials10.1016/j.pmatsci.2020.100736 ↗
37. A Review on Additive Manufacturing of Functional Gradient Piezoceramic10.3390/mi13071129 ↗
38. A Review on Recent Advances in Piezoelectric Ceramic 3D Printing
39. Review of the applications of 3D printing technology in the field of piezoelectric ceramics
40. Direct ink writing (DIW) of structural and functional ceramics: recent achievements and future challenges10.1016/j.compositesb.2021.109249 ↗
41. Rheological characterisation of ceramic inks for 3D direct ink writing: a review10.1016/j.jeurceramsoc.2021.08.031 ↗
42. Robocasting of advanced ceramics: ink optimization and protocol to predict the printing parameters - A review10.1016/j.heliyon.2022.e10651 ↗
43. Is the ubiquitous presence of barium carbonate responsible for the poor aqueous processing ability of barium titanate?10.1016/j.jeurceramsoc.2013.05.010 ↗
44. Preventing hydrolysis of BaTiO3 powders during aqueous processing and of bulk ceramics after sintering10.1016/j.jeurceramsoc.2015.03.007 ↗
45. Lead-free 0.5Ba(Zr0.2Ti0.8)O3-0.5(Ba 0.7Ca0.3)TiO3 powder surface treated against hydrolysis-a key for a successful aqueous processing10.1039/c3tc30741g ↗
46. The influence of pH dependent ion leaching on the processing of lead-zirconate-titanate ceramics10.1016/j.jeurceramsoc.2015.02.021 ↗
47. Thermal shock cracking resistant multilayer ceramic capacitor termination compositions, (1992).
48. Zeta potential | Anton Paar Wiki, (n.d.).
49. Nanoparticle Inks for Directed Assembly of Three-Dimensional Periodic Structures10.1002/adma.200305413 ↗
50. Concentrated barium titanate colloidal gels prepared by bridging flocculation for use in solid freeform fabrication10.1111/j.1551-2916.2005.00646.x ↗
51. Direct ink writing of macroporous lead-free piezoelectric Ba0.85Ca0.15Zr0.1Ti0.9O310.1111/jace.16220 ↗
52. Dispersion and rheology for direct writing lead-based piezoelectric ceramic pastes with anisotropic template particles10.1111/jace.17350 ↗
53. The role of material chemistry in processing BaTiO 3 in aqueous suspensions10.1111/j.1551-2916.2006.01021.x ↗
54. Optimization of polarization direction on 3D printed 3-3 piezoelectric composites for sensing application
55. The pH-responsive behaviour of poly(acrylic acid) in aqueous solution is dependent on molar mass10.1039/C5SM02693H ↗
56. Colloidal inks for directed assembly of 3-D periodic structures10.1021/la0257135 ↗
57. Shear and compressive rheology of aggregated alumina suspensions10.1002/aic.690430707 ↗
58. Particle size influence on material properties of BaTiO3 ceramics fabricated using freeze-form extrusion 3D printing10.1088/2053-1591/ab4a36 ↗
59. Optimization of 3D printing parameters for BaTiO3 piezoelectric ceramics through design of experiments10.1088/2053-1591/ab200e ↗
60. Direct ink writing of bismuth molybdate microwave dielectric ceramics10.1016/j.ceramint.2020.11.102 ↗
61. Influence of bimodal particle distribution on material properties of BaTiO3 fabricated by paste extrusion 3D printing10.1016/j.ceramint.2021.03.171 ↗
62. The yield stress of concentrated flocculated suspensions of size distributed particles10.1122/1.551029 ↗
63. The rheology of suspensions of solid particles Linked references are available on JSTOR for this article
64. Rheological characterization of bimodal colloidal dispersions10.1007/BF00437301 ↗
65. S. Pednekar, J. Chun, J.F. Morris, Bidisperse and polydisperse suspension rheology at large solid fraction, J. Rheol. (N. Y. N. Y). 62 (2018) 513–526. https://doi.org/10.1122/1.5011353/16137306/513_1_ACCEPTED_MANUSCRIPT.PDF.10.1122/1.5011353 ↗
66. High thermal conductivity epoxy composites with bimodal distribution of aluminum nitride and boron nitride fillers10.1016/j.tca.2012.03.002 ↗
67. Particle shape and suspension rheology of short-fiber systems10.1016/j.jeurceramsoc.2004.10.016 ↗
68. The rheology of concentrated suspensions of arbitrarily-shaped particles10.1016/j.jcis.2010.02.033 ↗
69. Kirigami–Origami-Inspired Lead-Free Piezoelectric Ceramics
70. Electromechanical Properties of Robocasted Barium Titanate Ceramics10.1002/adem.202000325 ↗
71. Additive manufacturing of barium titanate based ceramic heaters with positive temperature coefficient of resistance (PTCR)10.1016/j.jeurceramsoc.2019.03.024 ↗
72. Direct ink writing of 3D piezoelectric ceramics with complex unsupported structures10.1016/j.jeurceramsoc.2022.03.038 ↗
73. Hybrid inks for 3D printing of tall BaTiO3-based ceramics
74. Understanding ink design and printing dynamics of extrusion-based 3D printing: Defect-free dense piezoelectric ceramics10.1016/j.jmapro.2023.02.018 ↗
75. Direct-Write Fabrication of Pb(Nb,Zr,Ti)O3 Devices: Influence of Paste Rheology on Print Morphology and Component Properties10.1111/j.1151-2916.2001.tb01036.x ↗
76. Konsistenzmessungen von Gummi-Benzollösungen10.1007/BF01432034 ↗
77. Paste extrusion 3D printing and characterization of lead zirconate titanate piezoelectric ceramics10.1016/j.ceramint.2021.04.224 ↗
78. A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders10.1002/adem.201900604 ↗
79. From rapid prototyping to rapid firing: on the feasibility of high-speed production for complex BaTiO3 components10.1111/jace.19950 ↗
80. 3D printing of doped barium-titanate using robocasting - Toward new generation lead-free piezoceramic transducers10.1016/j.jeurceramsoc.2023.02.054 ↗
81. Linking rheology and printability for dense and strong ceramics by direct ink writing
82. Experimental study about the agglomeration behavior in slurry prepared by adding excess polyelectrolyte dispersant10.1016/j.apt.2011.08.004 ↗
83. 4D Printing of lead zirconate titanate piezoelectric composites transducer based on direct ink writing
84. 3D printing vertically: Direct ink writing free-standing pillar arrays10.1016/j.mattod.2020.01.003 ↗
85. Effect of the slurry composition on the piezoelectric properties of PZT ceramics fabricated via materials extrusion 3D printing10.1016/j.ceramint.2023.03.124 ↗
86. Fabrication of bulk piezoelectric and dielectric BaTiO 3 ceramics using paste extrusion 3D printing technique10.1111/jace.16242 ↗
87. Capillary forces in suspension rheology10.1126/science.1199243 ↗
88. Giant functional properties in porous electroceramics through additive manufacturing of capillary suspensions10.1021/acsami.1c19297 ↗
89. Ceramic capillary suspensions: novel processing route for macroporous ceramic materials10.1111/jace.12126 ↗
90. Paste rheology correlating with dispensed finger geometry10.1109/JPHOTOV.2013.2278657 ↗
91. Direct writing of textured ceramics using anisotropic nozzles10.1016/j.jeurceramsoc.2020.10.021 ↗
92. Direct writing of dielectric ceramics and base metal electrodes10.1111/j.1744-7402.2007.02118.x ↗
93. 3D printing of piezoelectric barium titanate with high density from milled powders10.1016/j.jeurceramsoc.2020.06.021 ↗
94. Significantly decreased depolarization hydrostatic pressure of 3D-printed PZT95/5 ceramics with periodically distributed pores10.1111/jace.18080 ↗
95. Direct ink writing of three-dimensional (K, Na)NbO3-based piezoelectric ceramics10.3390/ma8041729 ↗
96. 3D-printed barium strontium titanate-based piezoelectric scaffolds for bone tissue engineering10.1016/j.ceramint.2019.04.102 ↗
97. Multi-parametric exploration of a selection of piezoceramic materials for bone graft substitute applications
98. Piezoelectric ceramics with hierarchical macro- and micro-pore channels for sensing applications
99. Development of a binder formulation for fused deposition of ceramics10.1108/13552549810239012 ↗
100. Mechanical and rheological properties of feedstock material for fused deposition of ceramics and metals (FDC and FDMet) and their relationship to process performance