journal article·2024-05

The SCAPS-1D simulation of non-toxic KGeCl3 perovskite from DFT derived properties

Md. Adnan Faisal Siddique, Abu Sadat Md. Sayem Rahman

Publisher page

Abstract

This work focuses on studying of lead-free inorganic perovskite material, specifically cubic-KGeCl 3, as a solar cell absorber layer. The SCAPS-1D simulation is performed based on the electronic properties derived from DFT analysis of KGeCl 3. The performance of KGeCl 3 perovskite solar cell has been optimized by suitable selection of ETL and HTL material, layer thickness, doping concentration, defect density, series resistance, shunt resistance and back metal contact. It was found out that SnS 2 as ETL and Cu 2O as HTL provides best power conversion efficiency ( PCE). The results obtained from this study aligned well with previous published literatures. Finally, the optimized novel device architecture FTO/SnS 2/KGeCl 3/Cu 2O/C shows a PCE of 15.83 %, Voc = 545 mV, Jsc = 41.91 mA/cm 2 and FF = 69.24 % at 300 K temperature. The findings of this study suggest that cubic-KGeCl 3 perovskite can be a very promising candidate for non-toxic inorganic solar cells.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Solid-state spectroscopy and crystallography · Gas Sensing Nanomaterials and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (77)

Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. Frontiers, opportunities, and challenges in perovskite solar cells: a critical review10.1016/j.jphotochemrev.2017.11.002 ↗
3. Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells10.1038/s41586-021-03406-5 ↗
4. “Unleaded” perovskites: status quo and future prospects of tin-based perovskite
5. Band gap engineering to stimulate the optoelectronic performance of lead-free halide perovskites RbGeX3 (X = cl, br) under pressure10.1007/s10854-022-08318-2 ↗
6. Tuning band gap and enhancing optical functions of AGeF3 (a = K, rb) under pressure for improved optoelectronic applications10.1038/s41598-022-12713-4 ↗
7. Synthesis, characterization, and stability studies of ge-based perovskites of controllable mixed cation composition, produced with an ambient surfactant-free approach10.1021/acsomega.9b02203 ↗
8. A mini-review of recent studies on lead and lead-free perovskite materials for solar cells application and their issues
9. DFT study of cubic, tetragonal and trigonal structures of KGeCl3 perovskites for photovoltaic applications10.1016/j.cocom.2022.e00772 ↗
10. Theoretical insights into a potential lead-free hybrid perovskite: substituting Pb2+ with Ge2+10.1039/C5NR05337D ↗
11. New pb-free stable Sn–Ge solid solution halide perovskites fabricated by spray deposition10.1021/acsaem.1c04115 ↗
12. Highly stable and efficient all-inorganic lead-free perovskite solar cells with native-oxide passivation10.1038/s41467-018-07951-y ↗
13. Reducing trap density and carrier concentration by a ge additive for an efficient quasi 2D/3D perovskite solar cell10.1039/C9TA11989B ↗
14. Effects of cu, ag and au on electronic and optical properties of α-Ga2O3 oxide according to first-principles calculations10.1016/j.jpcs.2022.111152 ↗
15. First-principles investigation of structural stability, electronic and optical properties of suboxide (Zr3O)10.1016/j.mseb.2022.115746 ↗
16. Influence of oxygen vacancies on the electronic and optical properties of zirconium dioxide from first-principles calculations10.1007/s11664-019-07325-0 ↗
17. First-principles investigation of the influence of point defect on the electronic and optical properties of α-Ga2O3
18. A DFT study of the electronic structure, optical, and thermoelectric properties of halide perovskite KGeI3-xBrx materials: photovoltaic applications10.1007/s00339-021-04600-y ↗
19. Non-leaded, KSnI3 based perovskite solar cell: a DFT study along with SCAPS simulation10.1016/j.matchemphys.2023.127426 ↗
20. Modular design of SPIRO-OMeTAD analogues as hole transport materials in solar cells10.1039/C5CC02129D ↗
21. Solution-processed CuOx as an efficient hole-extraction layer for inverted planar heterojunction perovskite solar cells10.1016/j.cclet.2016.06.021 ↗
22. Low-cost solution-processed copper iodide as an alternative to PEDOT:PSS hole transport layer for efficient and stable inverted planar heterojunction perovskite solar cells10.1039/C5TA05286F ↗
23. Numerical analysis of the back interface for high efficiency wide band gap chalcopyrite solar cells10.1016/j.solener.2019.01.018 ↗
24. Recent advances in hole-transporting layers for organic solar cells10.3390/nano12030443 ↗
25. A brief review of hole transporting materials commonly used in perovskite solar cells10.1007/s12598-020-01691-z ↗
26. Study of Se/Te-doped Cu2O as a hole transport material in perovskite solar cells10.1039/D2RA04659H ↗
27. Exploring solar cell performance of inorganic Cs2TiBr 6 halide double perovskite: a numerical study10.1016/j.spmi.2020.106652 ↗
28. Numerical investigation of the Cu2O solar cell with double electron transport layers and a hole transport layer10.1016/j.optmat.2022.112642 ↗
29. Mobility of electronic charge carriers in titanium dioxide10.1021/jp801028j ↗
30. Optical characterization of a-IGZO thin film for simulation of a-IGZO(N)/Μ-Si(p) heterojunction solar cell10.1007/s11082-016-0660-5 ↗
31. Low-temperature solution-processed ZnSe electron transport layer for efficient planar perovskite solar cells with negligible hysteresis and improved photostability10.1021/acsnano.8b01351 ↗
32. A comprehensive defect study of tungsten disulfide (WS2) as electron transport layer in perovskite solar cells by numerical simulation10.1016/j.rinp.2018.12.049 ↗
33. Two-dimensional SnS2 nanosheets as electron transport and interfacial layers enable efficient perovskite solar cells10.1039/D2TC02452G ↗
34. Current status of electron transport layers in perovskite solar cells: materials and properties10.1039/C7RA00002B ↗
35. The architecture of the electron transport layer for a perovskite solar cell10.1039/C7TC04649A ↗
36. First principles methods using CASTEP10.1524/zkri.220.5.567.65075 ↗
37. Improved adsorption energetics within density-functional theory using revised perdew-burke-ernzerhof functionals10.1103/PhysRevB.59.7413 ↗
38. Soft self-consistent pseudopotentials in a generalized eigenvalue formalism10.1103/PhysRevB.41.7892 ↗
39. First-Principles Investigation of Electronic and Optical Properties of H-Doped FeS2
40. Special points for brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
41. General methods for geometry and wave function optimization10.1021/j100203a036 ↗
42. Kasap, S., Principles of Electronic Materials and Devices. 2005: McGraw-Hill, Inc.
43. Modelling polycrystalline semiconductor solar cells10.1016/S0040-6090(99)00825-1 ↗
44. Numerical simulation studies of Cs3Bi2I9 perovskite solar device with optimal selection of electron and hole transport layers10.1016/j.ijleo.2021.166417 ↗
45. Half-metalicity, mechanical, optical, thermodynamic, and thermoelectric properties of full heusler alloys Co2TiZ (Z = si; ge; sn)10.1007/s11082-023-04793-x ↗
46. The influence of ag and cu on the electronic and optical properties of ZrO from first-principles calculations10.1016/j.mssp.2021.106084 ↗
47. Azouaoui, A., A. Harbi, M. Moutaabbid, N. Benzakour, A. Hourmatallah, K. Bouslykhane, R. Masrour, and A. Chahboun, Influence of pressure on structural stability and physical properties of NaCaZ (Z=N, P and As) half-Heusler semiconductor materials. 0(0): p. 2450122.
48. Influence of pressure on the structural, elastic and thermodynamic properties of α- and β- PtAl high temperature alloys10.1016/j.jmrt.2023.11.290 ↗
49. Exploring the phase stability, mechanical and thermodynamic properties of FeCrAl ternary alloy10.1016/j.jmrt.2023.09.185 ↗
50. Theoretical predict the structure, elastic anisotropy and thermodynamic properties of Al5W in al-rich region10.1016/j.jmrt.2023.03.120 ↗
51. Optimization of an inorganic lead free RbGeI3 based perovskite solar cell by SCAPS-1D simulation10.1016/j.solener.2022.03.053 ↗
52. Thermodynamic, electronic, magnetic, thermoelectric, and optical properties of full heuslers compounds Co2TiAl(Ga, in): a first principles study10.1007/s00339-023-06744-5 ↗
53. Structural, electronic, magnetic, elastic, thermoelectric, and thermal properties of Co2FeGa1−xSix heusler alloys: first-principles calculations10.1007/s10948-022-06473-5 ↗
54. First-principle investigation of LiSrX (X=P and as) half-heusler semiconductor compounds10.1007/s12648-022-02522-w ↗
55. W. Voigt, Ueber die Beziehung zwischen den beiden Elasticitätsconstanten isotroper Körper. 1889. 274(12): p. 573-587.10.1002/andp.18892741206 ↗
56. A. Reuss, Berechnung der Fließgrenze von Mischkristallen auf Grund der Plastizitätsbedingung für Einkristalle. 1929. 9(1): p. 49-58.10.1002/zamm.19290090104 ↗
57. The elastic behaviour of a crystalline aggregate10.1088/0370-1298/65/5/307 ↗
58. Xcii. Relations between the elastic moduli and the plastic properties of polycrystalline pure metals10.1080/14786440808520496 ↗
59. Investigating the effect of non-ideal conditions on the performance of a planar CH3NH3PbI3-based perovskite solar cell through SCAPS-1D simulation10.1016/j.heliyon.2022.e11471 ↗
60. Study of effect of defects on CdS/CdTe heterojunction solar cell10.1016/j.ijleo.2020.164717 ↗
61. Performance analysis of MAPbI3 based perovskite solar cells employing diverse charge selective contacts: simulation study10.1016/j.solener.2019.10.009 ↗
62. Performance optimization of lead free-MASnI3 based solar cell with 27% efficiency by numerical simulation10.1016/j.optmat.2021.111193 ↗
63. Numerically investigating the AZO/Cu2O heterojunction solar cell using ZnO/CdS buffer layer10.1016/j.ijleo.2020.166228 ↗
64. Electron transport material effect on performance of perovskite solar cells based on CH3NH3GeI310.1016/j.optmat.2019.109517 ↗
65. Theoretical analysis on effect of band offsets in perovskite solar cells10.1016/j.solmat.2014.10.036 ↗
66. Numerical development of eco-friendly Cs2TiBr 6 based perovskite solar cell with all-inorganic charge transport materials via SCAPS-1D10.1016/j.ijleo.2020.165765 ↗
67. Impact of hole transport layer on the performance of all-inorganic tin (Sn) based perovskite solar cells10.1088/1757-899X/1120/1/012016 ↗
68. Performance evaluation of an all inorganic CsGeI3 based perovskite solar cell by numerical simulation10.1016/j.optmat.2021.111839 ↗
69. An optimized lead-free formamidinium sn-based perovskite solar cell design for high power conversion efficiency by SCAPS simulation10.1016/j.optmat.2020.110213 ↗
70. Unified electromagnetic-electronic Design of Light Trapping Silicon Solar Cells10.1038/srep31013 ↗
71. A simulation approach for investigating the performances of cadmium telluride solar cells using doping concentrations, carrier lifetimes, thickness of layers, and band gaps10.1016/j.solener.2020.12.070 ↗
72. Effect of absorber layer, hole transport layer thicknesses, and its doping density on the performance of perovskite solar cells by device simulation10.1016/j.solener.2019.12.014 ↗
73. Modeling of highly efficient and low cost CH3NH3Pb(I1-xClx)3 based perovskite solar cell by numerical simulation10.1016/j.optmat.2019.109631 ↗
74. Chapter 1 - Solar Cells and Arrays: Principles, Analysis, and Design
75. Investigation of the role of back contact work function for hole transporting layer free perovskite solar cells applications10.1016/j.ijleo.2022.168749 ↗
76. Champion device architectures for low-cost and stable single-junction perovskite solar cells10.1021/acsmaterialslett.3c00337 ↗
77. General temperature dependence of solar cell performance and implications for device modelling10.1002/pip.496 ↗