Current developments of mixed conducting membranes on porous substrates
Source abstract
Abstract
The fabrication of mixed ionic-electronic conducting (MIEC) ceramic-based membranes for oxygen separation has extensively increased in the last three decades as a promising alternative of clean energy delivery. In recent years, the interest on supported MIEC membranes has increased due to their attractive properties such as higher mechanical strength and oxygen flux compared to selfsupported membranes. This work presents a literature review on the development of supported MIEC membranes of perovskite structure. The concepts and transport mechanism of those membranes are explained and recent works on supported MIEC membranes are presented. Finally, manufacturing methods of self-supported membranes and their influence on oxygen permeation are discussed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Federal University of Santa Catarina, Brazil
The University of Queensland, Australia
References (70)
Show source-provided references
1. Development of mixed conducting membranes for clean coal energy delivery10.1016/j.ijggc.2008.11.003 ↗
2. Further performance improvement of Ba0.5Sr0.5Co0.8Fe0.2O3-δ perovskite membranes for air separation10.1016/j.ceramint.2009.02.015 ↗
3. Influence of sintering conditions on microstructure and oxygen permeation of Ba0.5Sr0.5Co0.8Fe0.2O3−δ (BSCF) oxygen transport membranes10.1016/j.memsci.2010.02.002 ↗
4. Yttrium doped BSCF membranes for oxygen separation10.1016/j.seppur.2011.07.007 ↗
5. Oxyfuel coal combustion by efficient integration of oxygen transport membranes10.1016/j.ijggc.2010.03.004 ↗
6. Gas separation membranes for zero emission fossil power plants: MEM-BRAIN10.1016/j.memsci.2010.04.012 ↗
7. Mixed ionic-electronic conducting (MIEC) ceramic-based membranes for oxygen separation10.1016/j.memsci.2008.03.074 ↗
8. Oxygen semipermeability of erbia-stabilized bismuth oxide10.1016/0167-2738(92)90416-M ↗
9. Oxygen diffusion and surface exchange in La2−xSr xNiO4+δ10.1016/S0167-2738(00)00388-X ↗
10. Electrical properties and oxygen diffusion in yttria-stabilised zirconia (YSZ)-La0.8Sr0.2MnO3±δ (LSM) composites10.1016/j.ssi.2004.11.019 ↗
11. Oxygen transport in Ce0.8Gd0.2O2−δ based composite membranes10.1016/S0167-2738(03)00183-8 ↗
12. Hollow fibre perovskite membranes for oxygen separation10.1016/j.memsci.2005.03.035 ↗
13. Perovskite hollow-fibre membranes for the production of oxygen-enriched air10.1002/anie.200501914 ↗
14. Fabrication and oxygen permeability of gastight. macrovoid-free Ba0.5Sr0.5Co0.8Fe0.2O3−δ capillaries for high temperature gas separation10.1016/j.memsci.2009.10.030 ↗
15. High performance perovskite hollow fibres for oxygen separation10.1016/j.memsci.2010.11.002 ↗
16. IT-SOFC supported on mixed oxygen ionic-electronic conducting composites10.1021/cm702508f ↗
17. Oxygen selective ceramic hollow fiber membranes10.1016/j.memsci.2004.09.028 ↗
18. Single-step fabrication of ceramic hollow fibers for oxygen permeation10.1016/j.memsci.2005.11.053 ↗
19. Microstructural development. electrical-properties and oxygen permeation of zirconia-palladium composites10.1016/0167-2738(94)00253-O ↗
20. Ultrahigh oxygen permeation flux through supported Ba0.5Sr0.5Co0.8Fe0.2O3−δ membranes10.1016/j.memsci.2011.04.050 ↗
21. Ceramic membranes for gas processing in coal gasification10.1039/b924327e ↗
22. Burggraaf AJ · 1996
23. Ceramic membrane technologies for oxygen separation10.1002/1521-4095(200107)13:12/13<993::AID-ADMA993>3.0.CO;2-# ↗
24. Goldschmidt VM · 1927
25. Mechanisms and rate laws for oxygen exchange on mixed-conducting oxide surfaces10.1016/j.jcat.2006.09.019 ↗
26. Current status of ceramic-based membranes for oxygen separation from air10.1016/j.cis.2010.07.007 ↗
27. Oxygen permeation study in a tubular Ba0.5Sr0.5Co0.8Fe0.2O3−δ oxygen permeable membrane10.1016/S0376-7388(02)00361-7 ↗
28. Oxygen surface exchange and diffusion in LaGaO(3) based perovskite type oxides10.1016/S0167-2738(98)00390-7 ↗
29. Oxygen self-diffusion and surface exchange studies of oxide electrolytes having the fluorite structure10.1016/S0167-2738(96)00514-0 ↗
30. Oxygen ion diffusivity. surface exchange and ionic conductivity in single crystal Gadolinia doped Ceria10.1016/S0167-2738(98)00323-3 ↗
31. Oxygen surface exchange on gadolinia doped ceria10.1016/S0167-2738(00)00530-0 ↗
32. Oxygen permeation of SrFe0.67 Co0.33O3-δ10.1016/S0167-2738(00)00389-1 ↗
33. Oxygen permeation through thin mixed-conducting solid oxide membranes10.1002/aic.690400506 ↗
34. Theoretical analysis of ion permeation through mixed conducting membranes and its application to dehydrogenation reactions10.1016/S0167-2738(00)00782-7 ↗
35. Importance of the surface exchange kinetics as rate-limiting step in oxygen permeation through mixed-conducting oxides10.1016/0167-2738(94)90145-7 ↗
36. Experimental and modeling study of oxygen permeation modes for asymmetric mixed-conducting membranes10.1016/j.memsci.2008.05.061 ↗
37. Match of thermal performances between the membrane and the support for supported dense mixed-conducting membranes10.1016/j.memsci.2006.08.025 ↗
38. A dense oxygen separation membrane with a layered morphologic structure10.1016/j.memsci.2007.05.023 ↗
39. Processing and oxygen permeation studies of asymmetric multilayer Ba0.5Sr0.5Co0.8Fe0.2O3−δ membranes10.1016/j.memsci.2011.06.034 ↗
40. Oxygen permeability and stability of asymmetric multilayer Ba0.5Sr0.5Co0.8Fe0.2O3−δ ceramic membranes10.1016/j.ssi.2010.05.030 ↗
41. Improving oxygen permeability in SrFeCo0.5Ox asymmetric membranes by modifying support-layer porous structure10.1016/j.matlet.2004.12.042 ↗
42. Oxygen permeation study and improvement of Ba0.5Sr0.5Co0.8Fe0.2Ox perovskite ceramic membranes10.1016/j.memsci.2010.11.073 ↗
43. A comparative study of the performance of symmetric and asymmetric mixed-conducting membranes10.1016/S1004-9541(08)60245-1 ↗
44. Processing and oxygen permeability of asymmetric ferrite-based ceramic membranes10.1016/j.ssi.2007.12.027 ↗
45. Preparation of a perovskite La0.2Sr0.8CoO3-x membrane on a porous MgO substrate10.1016/S0955-2219(00)00320-4 ↗
46. Thick-film type oxygen transport membrane: Preparation, oxygen permeation and characterization10.1007/s10832-006-0388-x ↗
47. Oxygen separation from compressed air using a mixed conducting perovskite-type oxide membrane10.1016/j.ssi.2007.02.031 ↗
48. Importance of pore structure control in porous substrate for high oxygen penetration in La0.6Sr0.4Ti0.3Fe0.7O3 thin film for CH4 partial oxidation10.1016/j.ssi.2010.12.015 ↗
49. Chemical compatibility investigation of thin-film oxygen transport membranes on metallic substrates10.1111/j.1551-2916.2010.04171.x ↗
50. Preparation and properties of thin La1-xSr xCo1-yFe yO3−δ perovskitic membranes supported on tailored ceramic substrates10.1016/j.ssi.2006.11.015 ↗
51. Preparation of dense. ultra-thin MIEC ceramic membranes by atmospheric spray-pyrolysis technique10.1016/j.memsci.2004.03.043 ↗
52. Preparation of an asymmetric perovskite-type membrane and its oxygen permeability10.1016/S0376-7388(00)00650-5 ↗
53. Co-casting and co-sintering of porous MgO support plates with thin dense perovskite layers of LaSrFeCoO310.1016/S0955-2219(03)00554-5 ↗
54. On the preparation of asymmetric CaTi0.9Fe0.1O3-δ membranes by tape-casting and co-sintering process10.1016/j.memsci.2008.10.009 ↗
55. Elaboration of La0.8Sr0.2Fe0.7Ga0.3O3-δ/La0.8M0.2FeO3-δ (M = Ca. Sr and Ba) asymmetric membranes by tape-casting and co-firing10.1016/j.memsci.2009.02.002 ↗
56. An architectural approach to the oxygen permeability of a La0.6Sr0.4Fe0.9Ga0.1O3-δ perovskite membrane10.1016/j.jeurceramsoc.2005.06.025 ↗
57. Synthesis and characterization of mixed ionic-electronic conducting Ca0.8Sr0.2Ti0.7Fe0.3O3-α thin film10.1016/j.ssi.2007.11.011 ↗
58. Synthesis of Ca0.8Sr0.2Ti0.7Fe0.3O3-δ thin film membranes and its application to the partial oxidation of methane10.1016/j.ssi.2012.06.001 ↗
59. Preparation of oxygen evolution layer/La0.6Ca0.4CoO3 dense membrane/porous support asymmetric structure for high-performance oxygen permeation10.1016/j.ssi.2007.12.092 ↗
60. Oxygen Permeation of a dense/porous asymmetric membrane using La0.6Ca0.4CoO3-δ-BaFe0.975Zr0.025O3-δ system10.1246/cl.2009.94 ↗
61. High-Performance oxygen-permeable membranes with an asymmetric structure using Ba0.95La0.05FeO3-δ perovskite-type oxide10.1002/adma.200903953 ↗
62. Preparation of asymmetric perovskite-type membranes by a settlement method10.1016/j.ceramint.2009.10.007 ↗
63. Design of asymmetric multilayer membranes based on mixed ionic-electronic conducting composites supported on Ni-Al foam substrate10.1016/j.cattod.2010.07.030 ↗
64. Processing routes to macroporous ceramics: A review10.1111/j.1551-2916.2006.01044.x ↗
65. Processing of cellular ceramics by foaming and in situ polymerisation of organic monomers10.1016/S0955-2219(99)00024-2 ↗
66. Prediction of ceramic foams permeability using Ergun' s equation10.1590/S1516-14391999000400008 ↗
67. Effect of aeration technique on the macrostructure and permeability of gelcast ceramic foams
68. Preparation of macroporous alumina ceramics using wheat particles as gelling and pore forming agent10.1016/j.ceramint.2005.07.020 ↗
69. Thermal decomposition of polyurethane foams for manufacturing LZSA cellular glass ceramics
70. Cellular ceramics by direct foaming of emulsified ceramic powder suspensions10.1111/j.1551-2916.2008.02553.x ↗