Effect of High-pressure Torsion on Corrosion Behavior of a Solution-treated Al-Mg-Sc Alloy in a Saline Solution
Source abstract
Abstract
The effect of the increase in crystalline defects in the structure generated by high-pressure torsion (HPT) on the corrosion behavior of metallic materials is not well understood. This report evaluates the influence of HPT on the corrosion behavior of a solution treated Al-3wt% Mg-0.2wt% Sc alloy in a 3.5 wt./v.% NaCl solution. The electrochemical behavior of the alloy was evaluated using cyclic polarization, electrochemical impedance spectroscopy (EIS), Mott Schottky, X-ray photoelectron spectroscopy, and chronoamperometry testing. The passive current density decreased after HPT processing, indicating a more protective oxide layer was formed on the surface of the HPT-processed alloy. Mott Schottky analysis confirmed the higher protection efficiency of the passive layer on the HPT-processed alloy. The film formed in the solution-treated alloy was a p-type and an n-type semiconductor while the alloy processed by HPT exhibited only an n-type semiconductor behavior. EIS showed that corrosion resistance in a saline medium increased with HPT processing.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Universidade Federal de Minas Gerais, Brasil
University of Southampton, UK; Universidade Federal de Minas Gerais, Brasil
University of Southampton, UK
References (30)
Show source-provided references
1. Bi-modal trend in the long-term corrosion of aluminum alloys10.1016/j.corsci.2014.01.019 ↗
2. SVET, SKP and EIS study of the corrosion behavior of high strength Al and Al-Li alloys used in aircraft fabrication10.1016/j.corsci.2014.03.001 ↗
3. Nanostructured aluminum alloys produced by severe plastic deformation: new horizons in development10.1016/j.msea.2012.09.020 ↗
4. Producing Bulk Ultrafine-Grained Materials by Severe Plastic Deformation10.1007/s11837-006-0213-7 ↗
5. Evaluation of the tribological properties of an Al-Mg-Si alloy processed by severe plastic deformation10.1016/j.wear.2010.12.082 ↗
6. Pitting corrosion resistance of anodized aluminum-cooper alloy processed by severe plastic deformation10.2320/matertrans.MRA2008216 ↗
7. Effect of grain size on corrosion of high purity aluminum10.1016/j.electacta.2010.09.023 ↗
8. Review: achieving superplastic properties in ultrafine-grained materials at high temperatures10.1007/s10853-015-9176-9 ↗
9. An examination of the superplastic characteristics of Al-Mg-Sc alloys after processing10.1557/jmr.2017.286 ↗
10. Using high-pressure torsion for metal processing: Fundamentals and applications10.1016/j.pmatsci.2008.03.002 ↗
11. Effect of severe plastic deformation on the biocompatibility and corrosion rate of pure magnesium10.1007/s10853-017-0835-x ↗
12. Influence of dislocation-solute atom interactions and stacking fault energy on grain size of single-phase alloys after severe plastic deformation using high-pressure torsion10.1016/j.actamat.2014.01.036 ↗
13. Factors influencing the equilibrium grain size in equal-channel angular pressing: role of Mg additions to aluminum10.1007/s11661-998-0222-y ↗
14. Thermal stability and superplastic behaviour of an Al-Mg-Sc alloy processed by ECAP and HPT at different temperatures
15. An investigation of microstructural stability in an Al-Mg alloy with submicrometer grain size10.1016/1359-6454(95)00395-9 ↗
16. Influence of grain size on the flow properties of an Al-Mg-Sc alloy over seven orders of magnitude of strain rate10.1016/j.msea.2017.01.020 ↗
17. Microstructural evolution in Al-Mg-Sc-Zr alloy during severe plastic deformation and annealing10.1016/j.jallcom.2016.02.207 ↗
18. Corrosion of ultrafine grained materials by severe plastic deformation, an overview10.2320/matertrans.M2015452 ↗
19. Using finite element modeling to examine the temperature distribution in quasi-constrained high-pressure torsion10.1016/j.actamat.2012.02.027 ↗
20. Grain refinement and superplasticity in an aluminum alloy processed by high-pressure torsion10.1016/j.msea.2004.11.007 ↗
21. Novel strategy in increasing stability and corrosion resistance for super-hydrophobic coating on aluminum alloy surfaces10.1016/j.apsusc.2011.08.063 ↗
22. Electronic structure and pitting behavior of 3003 aluminum alloy passivated under various conditions10.1016/j.electacta.2009.02.058 ↗
23. A sol-bath-gel approach to prepare hybrid coating for corrosion protection of aluminum alloy10.1016/j.surfcoat.2015.08.032 ↗
24. Influence of heat treatment on corrosion behavior of Al-Zn-Mg-Cu-Zr-Sc alloy10.1002/maco.201005923 ↗
25. Pitting and passivation of Al alloys and Al based metal matrix composites10.1149/1.2086442 ↗
26. The role of silicon alloying addition on the pitting corrosion resistance of an Al-12wt.%Si alloy10.1016/j.electacta.2014.05.034 ↗
27. Effect of microcrystallization on corrosion resistance of AZ91D alloy10.1016/j.electacta.2005.08.023 ↗
28. Observations of anomalies in the anodic behavior of microcrystalline aluminum10.1016/j.corsci.2010.04.009 ↗
29. Pitting corrosion of naturally aged AA 7075 aluminum alloys with bimodal grain size10.1016/j.corsci.2016.09.013 ↗
30. Point defect model and corrosion of anodic oxide coatings on Ti-6Al-4V10.1016/j.corsci.2008.02.023 ↗