journal article·2025-12Open access

Thermoelectric performance of oriented SrTiO3 nanofilms containing Σ3{111} grain boundary interfaces

Nathan D. Wood, Stephen R. Yeandel, Joseph M. Flitcroft, Jonathan M. Skelton, David J. Cooke, Lisa J. Gillie, Stephen C. Parker, Marco Molinari

Materials & Design· Volume 260

Abstract

• Nanostructured SrTiO 3 has great promise in heat-recovery technologies. • Nanostructuring can reduce lattice thermal conductivity. • Interfaces lead to undesirable reductions electronic properties. • The effect of interfaces on the power factor is detrimental. Heat-recovery technologies such as thermoelectric power are key to achieving Net Zero. Oxide perovskites are abundant, cost effective and stable thermoelectric materials, but their performance is limited by high lattice thermal conductivity, κ l a t t . While nanostructuring is often used to control the κ l a t t , its impact on the electrical transport is less well understood. In this work, we report a first principles modelling study of nanofilms of SrTiO 3 containing Σ3{1 1 1} grain boundaries, providing detailed microscopic insight into how different stacking sequences affect the electrical and thermal transport and the thermoelectric figure of merit, zT . We find that structurally complex interfaces can reduce the κ l a t t by > 80 % compared to the bulk, but lead to undesirable reductions in the Seebeck coefficient, electrical conductivity and thermoelectric power factor. Our results highlight the importance of nanostructuring to length scales above the electron mean-free path, and show that the κ l a t t can be optimised by engineering the grain-boundary structure.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Advanced Thermodynamics and Statistical Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Quantification of global waste heat and its environmental effects10.1016/j.apenergy.2018.10.102 ↗
2. Thermoelectric-powered sensors for internet of things10.3390/mi14010031 ↗
3. Thermal conductivity in Bi0.5Sb1.5Te3+x and the role of dense dislocation arrays at grain boundaries10.1126/sciadv.aar5606 ↗
4. Unique microstructures and high thermoelectric performance in n–type Bi2Te2.7Se0.3 by the dual incorporation of cu and y
5. Non-equilibrium processing leads to record high thermoelectric figure of merit in PbTe–SrTe10.1038/ncomms12167 ↗
6. High-performance bulk thermoelectrics with all-scale hierarchical architectures10.1038/nature11439 ↗
7. SnSe: the rise of the ultrahigh thermoelectric performance material10.1002/bkcs.12821 ↗
8. Polycrystalline SnSe with a thermoelectric figure of merit greater than the single crystal10.1038/s41563-021-01064-6 ↗
9. Simultaneously engineering electronic and phonon band structures for high-performance n-type polycrystalline SnSe10.1016/j.joule.2024.02.013 ↗
10. Thermal stability of p-type polycrystalline Bi2Te3-based bulks for the application on thermoelectric power generation10.1016/j.jallcom.2016.09.143 ↗
11. Thermal stability and mechanical response of Bi2Te3-based materials for thermoelectric applications10.1021/acsaem.9b02093 ↗
12. A large thermoelectric figure of merit of La-doped SrTiO3 prepared by combustion synthesis with post-spark plasma sintering10.1016/j.scriptamat.2010.04.041 ↗
13. Improving the thermoelectric properties of SrTiO3-based ceramics with metallic inclusions10.1016/j.jallcom.2017.10.033 ↗
14. A review of key properties of thermoelectric composites of polymers and inorganic materials10.3390/ma15238672 ↗
15. Key properties of inorganic thermoelectric materials—tables (version 1)
16. Metal oxides for thermoelectric power generation and beyond10.1007/s42114-017-0011-4 ↗
17. Oxide materials for high temperature thermoelectric energy conversion10.1016/j.jeurceramsoc.2011.10.007 ↗
18. Review on texturization effects in thermoelectric oxides10.1007/s40243-019-0163-y ↗
19. A review of car waste heat recovery systems utilising thermoelectric generators and heat pipes10.1016/j.applthermaleng.2015.10.081 ↗
20. Effect of nanostructure on the thermal conductivity of La-doped SrTiO3 ceramics10.1016/j.jeurceramsoc.2013.08.009 ↗
21. Review on grain size effects on thermal conductivity in ZnO thermoelectric materials10.1039/D1RA06133J ↗
22. Modulation of charge transport at grain boundaries in SrTiO3: Toward a high thermoelectric power factor at room temperature10.1021/acsami.0c21699 ↗
23. Assessment of strain-generated oxygen vacancies using SrTiO3 bicrystals10.1021/acs.nanolett.5b01245 ↗
24. Phonon thermal transport through tilt grain boundaries in strontium titanate10.1063/1.4893648 ↗
25. Grain boundary engineering by shape-control of SrTiO3 nanocrystals10.1016/j.apt.2015.10.008 ↗
26. The impact of tilt grain boundaries on the thermal transport in perovskite SrTiO3 layered nanostructures. a computational study10.1039/C8NR02234H ↗
27. Grain boundary engineering nanostructured SrTiO3 for thermoelectric applications10.1002/admi.201900222 ↗
28. Computational study of oxygen diffusion along a[100] dislocations in the perovskite oxide SrTiO310.1021/acsami.5b12574 ↗
29. Nanostructuring perovskite oxides: the impact of SrTiO3 nanocube 3D self-assembly on thermal conductivity10.1039/C6RA23887D ↗
30. Transport properties of dislocations in SrTiO3 and other perovskites10.1016/j.cossms.2021.100923 ↗
31. Nanostructured thermoelectrics: the new paradigm?10.1021/cm902195j ↗
32. Advances in two-dimensional organic–inorganic hybrid perovskites10.1039/C9EE03757H ↗
33. Recombination in perovskite solar cells: Significance of grain boundaries, interface traps, and defect ions10.1021/acsenergylett.7b00236 ↗
34. Structural stabilities and electronic properties of high-angle grain boundaries in perovskite cesium lead halides10.1021/acs.jpcc.6b11434 ↗
35. The role of grain boundaries in perovskite solar cells10.1002/aenm.201901489 ↗
36. Electrical property enhancement in orientation-modulated perovskite La-doped SrTiO3 thermoelectric thin films10.1002/adfm.202301815 ↗
37. Twisted grain boundary leads to high thermoelectric performance in tellurium crystals10.1039/D2EE02169B ↗
38. Single-crystalline layered metal-halide perovskite nanowires for ultrasensitive photodetectors10.1038/s41928-018-0101-5 ↗
39. High-performance thermoelectrics from cellular nanostructured Sb2Si2Te610.1016/j.joule.2019.10.010 ↗
40. Thermal conductivity reduction in oxygen-deficient strontium titanates10.1063/1.2930679 ↗
41. Thickness dependent thermal conductivity of strontium titanate thin films on silicon substrate
42. The roles of grain boundaries in thermoelectric transports
43. Grain boundary segregation engineering in metallic alloys: A pathway to the design of interfaces10.1016/j.cossms.2014.06.002 ↗
44. Printable assemblies of perovskite nanocubes on meterscale panel10.1126/sciadv.add1559 ↗
45. Challenges and approaches towards upscaling the assembly of hybrid perovskite solar cells10.1039/D0MA00128G ↗
46. Nanostructuring methylammonium lead iodide perovskite by ultrafast nano imprinting lithography10.1016/j.mee.2017.02.023 ↗
47. Facile fabrication of three-dimensional TiO2 structures for highly efficient perovskite solar cells10.1016/j.nanoen.2016.02.050 ↗
48. Atomistic simulation of dislocations, surfaces and interfaces in MgO10.1039/ft9969200433 ↗
49. VESTA3 for three-dimensional visualization of crystal, volumetric and morphology data10.1107/S0021889811038970 ↗
50. Emerging perovskite monolayers10.1038/s41563-021-01029-9 ↗
51. Freestanding crystalline oxide perovskites down to the monolayer limit10.1038/s41586-019-1255-7 ↗
52. Controlled crystalline orientation of SrTiO3 thin films grown on Pt(111)/Ti/Al2O3(0001) substrates: effect of growth temperature and Ti layer thickness10.1016/j.apsusc.2014.04.186 ↗
53. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
54. Ab initio molecular dynamics for liquid metals10.1103/PhysRevB.47.558 ↗
55. Ab initio molecular-dynamics simulation of the liquid-metal–amorphous-semiconductor transition in germanium10.1103/PhysRevB.49.14251 ↗
56. Efficient iterative schemes for ab initio totalenergy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
57. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
58. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
59. Electron-energy-loss spectra and the structural stability of nickel oxide: an LSDA+U study10.1103/PhysRevB.57.1505 ↗
60. Structural, electronic, and transport properties of hybrid SrTiO3-graphene and carbon nanoribbon interfaces10.1021/acs.chemmater.7b02253 ↗
61. Unraveling the impact of graphene addition to thermoelectric SrTiO3 and La-doped SrTiO3 materials: a density functional theory study10.1021/acsami.1c10865 ↗
62. Tungsten bronze barium neodymium titanate (Ba6–3nNd8+2nTi18O54): An intrinsic nanostructured material and its defect distribution10.1021/acs.inorgchem.5b02594 ↗
63. First principles insights into oxide/polymer composites: SrTiO3/polyaniline/graphene10.1016/j.jmst.2023.05.019 ↗
64. First principles methods using castep10.1524/zkri.220.5.567.65075 ↗
65. Nanoscale strontium titanate photocatalysts for overall water splitting10.1021/nn302647u ↗
66. Optados - a new tool for eels calculations
67. Optados: a tool for obtaining density of states, core-level and optical spectra from electronic structure codes10.1016/j.cpc.2014.02.013 ↗
68. Boltztrap2, a program for interpolating band structures and calculating semi-classical transport coefficients10.1016/j.cpc.2018.05.010 ↗
69. Efficient calculation of carrier scattering rates from first principles10.1038/s41467-021-22440-5 ↗
70. First-principles modelling of the thermoelectric properties of n-type CaTiO3, SrTiO3 and BrTiO310.1039/D3MA00624G ↗
71. Impact of crystal structure on the thermoelectric properties of n-type SrTiO310.1039/D5YA00105F ↗
72. Linear optical properties in the projector-augmented wave methodology10.1103/PhysRevB.73.045112 ↗
73. Markoff random processes and the statistical mechanics of time-dependent phenomena. ii. irreversible processes in fluids10.1063/1.1740082 ↗
74. Statistical-mechanical theory of irreversible processes. i. general theory and simple applications to magnetic and conduction problems10.1143/JPSJ.12.570 ↗
75. Fast parallel algorithms for short-range molecular dynamics10.1006/jcph.1995.1039 ↗
76. An atomistic modelling investigation of the defect chemistry of SrTiO3 and its Ruddlesden-Popper phases, Srn+1TinO3n+1 (n = 1–3)10.1016/j.jssc.2021.122523 ↗
77. S. Plimpton, A. Kohlmeyer, A. Thompson, S. Moore, R. Berger, Lammps stable release 29 september 2021 (sep 2021). https://doi.org/10.5281/zenodo.6386596.
78. Thermal conductivity decomposition and analysis using molecular dynamics simulations: Part ii. complex silica structures10.1016/j.ijheatmasstransfer.2003.11.009 ↗
79. Complex superlattice unit cell designs for reduced thermal conductivity10.1103/PhysRevB.77.184302 ↗
80. Nitrogen-vacancy center in diamond: Model of the electronic structure and associated dynamics10.1103/PhysRevB.74.104303 ↗
81. Demystifying umklapp vs normal scattering in lattice thermal conductivity10.1119/1.4892612 ↗
82. First principles phonon calculations in materials science10.1016/j.scriptamat.2015.07.021 ↗
83. Distributions of phonon lifetimes in brillouin zones10.1103/PhysRevB.91.094306 ↗
84. Wigner formulation of thermal transport in solids
85. Unified theory of thermal transport in crystals and glasses10.1038/s41567-019-0520-x ↗
86. The structure of grain boundaries in strontium titanate: Theory, simulation, and electron microscopy10.1146/annurev-matsci-010510-104604 ↗
87. Strontium titanate surfaces10.1179/174328407X154383 ↗
88. Band gap engineering of strontium titanate (SrTiO3) for improved photocatalytic activity and excellent bio-sensing aptitude10.1016/j.mssp.2024.108327 ↗
89. First principle electronic, structural, elastic, and optical properties of strontium titanate10.1063/1.3700433 ↗
90. A DFT+U approach to doped SrTiO3 for solar harvesting applications10.1016/j.commatsci.2022.111743 ↗
91. Structural and optical properties of paraelectric SrTiO310.1088/0953-8984/12/14/309 ↗
92. Origin of photoluminescence in SrTiO3: a combined experimental and theoretical study10.1016/j.jssc.2004.07.043 ↗
93. Effect of strain on thermoelectric properties of SrTiO3: First-principles calculations10.1016/j.cplett.2013.09.036 ↗
94. Electronic transport and the thermoelectric properties of donor-doped SrTiO3
95. Effective mass and fermi surface complexity factor from ab initio band structure calculations10.1038/s41524-017-0013-3 ↗
96. Orbital chemistry of high valence band convergence and low-dimensional topology in PbTe10.1039/D1TA01273H ↗
97. Thinking like a chemist: intuition in thermoelectric materials10.1002/anie.201508381 ↗
98. Thermoelectric properties of the lowspin lanthanide cobalate perovskites LaCoO3, PrCoO3, and NdCoO3 from first-principles calculations10.1039/D4CP04303K ↗
99. Rationally designing highperformance bulk thermoelectric materials10.1021/acs.chemrev.6b00255 ↗
100. Processing bulk insulating CaTiO3 into a high-performance thermoelectric material