journal article·2025-06Open access

Impact of (NH4)2SO4 agricultural atmospheric pollutant on the degradation mechanisms of thin layer Cu(In,Ga)Se2 solar cells

Adèle Debono, Noor Fikree, Amelle Rebai, Nathanaelle Schneider, Jean-François Guillemoles, Polina Volovitch

Corrosion Science· Volume 249

Abstract

Chemical environment is usually disregarded in stability evaluations of photovoltaic devices but it can be critical for agrivoltaics (dual land use for energy production and agriculture). This work considers for the first time the effect of (NH 4 ) 2 SO 4 agricultural pollutant on the chemical degradation mechanisms of thin layer solar cells. Cu(In,Ga)Se 2 (CIGS) cells with the architecture SLG/Mo/CIGS/Zn(O,S)/ZnMgO/Al:ZnO/NiAlNi and representative stacks were characterized at different times of temperature/humidity cyclic aging with and without (NH 4 ) 2 SO 4 . The pollutant strongly increased degradation rate and modified the key degradation mechanisms . Cu(In,Ga)Se 2 -absorber and its interface with Mo-back contact were the most affected by accelerated aging without (NH 4 ) 2 SO 4 , while corrosion of front NiAlNi contacts and pitting of window Al-doped ZnO layer was the key degradation mechanism in the presence of (NH 4 ) 2 SO 4 . Chemical modifications of the cell and layers were coherent with optoelectrical characteristics loss. The work implies the necessity to take into account specific agricultural pollutants in reliability evaluation of new technologies for agrivoltaic applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Silicon and Solar Cell Technologies · Photovoltaic Systems and Sustainability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (89)

Show source-provided references
1. European Commission. Joint Research Centre., Overview of the potential and challenges for agri-photovoltaics in the European Union., Publications Office, LU, 2023. 〈https://data.europa.eu/doi/10.2760/208702〉 (accessed November 30, 2023).
2. Agrivoltaics, a promising new tool for electricity and food production: a systematic review10.1016/j.rser.2023.114277 ↗
3. IEA · 2021
4. Solutions to corrosion caused by agricultural chemicals
5. Corrosion in fertilizer equipment, corrosion of metals by liquid mixed fertilizers10.1021/jf60089a005 ↗
6. International Electrotechnical Commission, International Standard IEC 61215, Crystalline silicon terrestrial photovoltaic (PV) modules – Design qualification and type approval, (2016).
7. Agrivoltaic systems design and assessment: a critical review, and a descriptive model towards a sustainable landscape vision (Three-Dimensional Agrivoltaic Patterns)10.3390/su13126871 ↗
8. Photovoltaic shade for greenhouses
9. Cu(InGa)Se2 solar cells
10. Review on incorporation of alkali elements and their effects in Cu(In,Ga)Se2 solar cells10.1016/j.jmst.2020.07.050 ↗
11. Influence of the atmospheric species water, oxygen, nitrogen and carbon dioxide on the degradation of aluminum doped zinc oxide layers10.1016/j.tsf.2014.07.005 ↗
12. The impact of atmospheric species on the degradation of CIGS solar cells10.1016/j.solmat.2015.05.019 ↗
13. The influence of atmospheric species on the degradation of the Mo/MoSe2 back contact in CIGS solar cells10.1016/j.matchemphys.2021.125686 ↗
14. Leygraf · 2016
15. Use of ammonium sulphate as a sulphur fertilizer: implications for ammonia volatilization10.1111/sum.12733 ↗
16. The use of ammonium sulphate has an adjuvant effect
17. Characterization and classification of atmospheric sulfates10.1080/00022470.1979.10470871 ↗
18. 2000, Committee on the environment and natural resources, Atmospheric Ammonia: Sources and Fate A Review of Ongoing Federal Research and Future Needs, (2000)..
19. K.-H. Zapp, K.-H. Wostbrock, M. Schäfer, K. Sato, H. Seiter, W. Zwick, R. Creutziger, H. Leiter, Ammonium Compounds, in: Wiley-VCH Verlag GmbH & Co. KGaA (Ed.), Ullmann’s Encyclopedia of Industrial Chemistry, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, Germany, 2000: pp. 263–287. https://doi.org/10.1002/14356007.a02_243.10.1002/14356007.a02_243 ↗
20. National air pollutant emissions data viewer 2005-2022, European Environment Agency (2022). 〈https://www.eea.europa.eu/en/topics/in-depth/air-pollution/national-air-pollutant-emissions-data-viewer-2005-2022〉 (accessed May 23, 2024).
21. D.W. Cunningham, The Effect of Ammonia Ambient On PV Module Performance and Longevity, in: 2011: pp. 3088–3092. https://doi.org/10.4229/26thEUPVSEC2011-4CO.5.2.
22. U. Weber, T. Sögding, W. Huschke, H. Engelmann, U. Fliedner, S. Ag, Evaluation of Ammonia Resistance of PV Modules, in: Valencia, Spain, 2010: pp. 4007–4010. https://doi.org/10.4229/25thEUPVSEC2010-4AV.3.14.
23. Importance of atmospheric aerosol pollutants on the degradation of Al2O3 encapsulated Al-doped zinc oxide window layers in solar cells10.1002/pip.3527 ↗
24. Synergistic effect between molybdenum back contact and CIGS absorber in the degradation of solar cells10.1002/pip.3742 ↗
25. Atmospheric corrosion of zinc in the presence of ammonium sulfate particles10.1149/1.1836676 ↗
26. Initial atmospheric corrosion of zinc in presence of Na2SO4 and (NH4)2SO410.1016/S1003-6326(06)60345-2 ↗
27. Role of particle contamination in the corrosion of electronic materials and devices10.1116/1.578361 ↗
28. Mechanism of atmospheric corrosion of copper in the presence of submicron ammonium sulfate particles at 300 and 373 K10.1149/1.2059261 ↗
29. Atmospheric corrosion of aluminum in the presence of ammonium sulfate particles10.1149/1.1836615 ↗
30. Atmospheric corrosion10.1016/B978-075065924-6/50011-8 ↗
31. Impact of agricultural atmospheric pollutants on the opto-electrical performance of CIGS solar cells10.1002/pip.3834 ↗
32. T. Klinkert, Comprehension and optimisation of the co-evaporation deposition of Cu(In,Ga)Se2 absorber layers for very high efficiency thin film solar cells, Chemical Physics., Université Pierre et Marie Curie - Paris VI, 2015.
33. Toward an all-Atomic Layer Deposition (ALD) process for Cu(In,Ga)(S,Se)2 (CIGS)-type solar cell10.1016/j.solmat.2019.109965 ↗
34. Wet deposition of ammonium, nitrate and non-sea-salt sulphate in Sweden 1955 through 2017
35. Good Agreement Between Modeled and Measured Sulfur and Nitrogen Deposition in Europe, in Spite of Marked Differences in Some Sites10.3389/fenvs.2021.734556 ↗
36. Wet deposition of ammonium and atmospheric distribution of ammonia and particulate ammonium in Japan10.1016/S0269-7491(98)80050-X ↗
37. Atmospheric ammonium sulphate deposition and its role in the acidification and nitrogen enrichment of poorly buffered aquatic systems10.1007/BF02118615 ↗
38. Micro-Raman study of the m-MoO2 to α-MoO3 transformation induced by cw-laser irradiation10.1016/j.optmat.2010.10.028 ↗
39. Study of the photochromic properties of amorphous MoO3 films using raman microscopy10.1021/j100044a028 ↗
40. The impact of selenisation on damp heat degradation of the CIGS back contact molybdenum
41. Growth, characterization and performance of bulk and nanoengineered molybdenum oxides for electrochemical energy storage and conversion10.1016/j.pcrysgrow.2021.100533 ↗
42. Infrared and Raman spectra of MoO3 molybdenum trioxides and MoO3 · xH2O molybdenum trioxide hydrates10.1016/0584-8539(94)00247-9 ↗
43. Damp heat treatment of Cu(In,Ga)Se2 solar cells with different sodium content10.3390/ma6125478 ↗
44. Impact of water ingress on molybdenum thin films and its effect on Cu(In,Ga)Se2 solar cells10.1109/JPHOTOV.2019.2959947 ↗
45. The effect of damp heat-illumination exposure on CIGS solar cells: a combined XRD and electrical characterization study10.1016/j.solmat.2016.07.051 ↗
46. Raman spectroscopy study of Na2MoO4·2H2O and Na2MoO4 under hydrostatic pressure10.1002/jrs.2468 ↗
47. Investigation of intergrain compounds in sputtered Mo films applied in CuIn1−xGaxSe2-based solar cell10.1016/j.surfcoat.2011.09.030 ↗
48. Raman investigations of Cu(In,Ga)Se2 thin films with various copper contents10.1016/j.tsf.2008.07.011 ↗
49. UV-Raman scattering assessment of ZnO:Al layers from Cu(In, Ga)Se2 based solar cells: Application for fast on-line process monitoring
50. Non-destructive assessment of ZnO:Al window layers in advanced Cu(In,Ga)Se 2 photovoltaic technologies: ZnO:Al window layers in advanced Cu(In,Ga)Se 2 PV technologies10.1002/pssa.201431222 ↗
51. Determination of the pressure dependence of raman mode for an alumina–glass pair in hertzian contact10.3390/ma15238645 ↗
52. Multi-wavelength Raman scattering of nanostructured Al-doped zinc oxide10.1063/1.4866322 ↗
53. Improved Stability of CIGS-Based Thin-Film PV Modules
54. Failure analysis of Cu(In,Ga)Se 2 photovoltaic modules: degradation mechanism of Cu(In,Ga)Se 2 solar cells under harsh environmental conditions: failure analysis of CIGS photovoltaic modules10.1002/pip.2497 ↗
55. Approches analytique et électrochimique de la dégradation des tôles d’acier revêtues cataphorésées en atmosphères corrosives contenant des ions sulfates
56. The effect of synthetic zinc corrosion products on corrosion of electrogalvanized steel: I. Cathodic reactivity under zinc corrosion products10.1016/j.corsci.2013.11.045 ↗
57. Raman study of cation effect on sulfate vibration modes in solid state and in aqueous solutions10.1002/jrs.4374 ↗
58. Single phase Bunsenite NiO nanoparticles green synthesis by Agathosma betulina natural extract10.1016/j.jallcom.2015.09.227 ↗
59. Nickel hydroxides and related materials: a review of their structures, synthesis and properties10.1098/rspa.2014.0792 ↗
60. The electrochemistry of metallic nickel: oxides, hydroxides, hydrides and alkaline hydrogen evolution10.1149/2.026303jes ↗
61. The Raman spectra of crystalline sulphates of Ni and Mn10.1007/BF03052920 ↗
62. Raman spectra of nickel sulphate crystals10.1007/BF03053494 ↗
63. High-pressure behavior of nickel sulfate monohydrate: isothermal compressibility, structural polymorphism, and transition pathway10.1021/acs.inorgchem.0c00370 ↗
64. Structural and spectroscopic study of the kieserite-dwornikite solid-solution series, (Mg,Ni)SO4·H2O, at ambient and low temperatures, with cosmochemical implications for icy moons and Mars10.2138/am-2020-7287 ↗
65. Molybdenum and its compounds, in: The MAK-Collection for Occupational Health and Safety, Wiley-VCH Verlag GmbH & Co. KGaA, 2012: pp. 199–219.
66. On the reactive molten salt synthesis, solubility and Na-Ion storage performance of Na2Mo2O7
67. International Labour Organization, Sodium molybdate - ILO-WHO International Chemical Safety Cards, International Labour Organization (2004). 〈https://www.ilo.org/dyn/icsc/showcard.display?p_version= 2&p_card_id= 1010〉.
68. Corrosion and passivation behaviors of molybdenum in aqueous solutions of different pH10.1016/S0013-4686(98)00180-7 ↗
69. The revised pourbaix diagram for molybdenum
70. MoO42− as a soluble inhibitor for Zn in neutral and alkaline solutions10.1016/j.corsci.2015.05.005 ↗
71. Crystal structure, magnetic susceptibility and electrical conductivity of pure and NiO-doped MoO2 and WO2
72. Molybdenum oxides MoOx: spark-plasma synthesis and thermoelectric properties at elevated temperature10.1021/acs.chemmater.9b05075 ↗
73. Electrical resistivity of selected elements10.1063/1.555723 ↗
74. Damp-heat induced degradation of transparent conducting oxides for thin-film solar cells
75. The effect of synthetic zinc corrosion products on corrosion of electrogalvanized steel. II. Zinc reactivity and galvanic coupling zinc/steel in presence of zinc corrosion products10.1016/j.corsci.2013.12.024 ↗
76. Understanding corrosion via corrosion product characterization: II. Role of alloying elements in improving the corrosion resistance of Zn–Al–Mg coatings on steel10.1016/j.corsci.2011.03.016 ↗
77. Nickel hydroxide ageing time influence on its solubility in water acidified with sulphuric acid10.1016/j.jhazmat.2004.05.028 ↗
78. Improved electrochemical phase diagrams from theory and experiment: the Ni–water system and its complex compounds10.1021/acs.jpcc.7b02771 ↗
79. Electrical and dielectric properties of nickel sulfate hexa- and heptahydrate single crystals10.1016/0040-6031(79)80019-2 ↗
80. Material Property Data - Nickel, Ni, MatWeb - Material Protery Data (n.d.). 〈https://www.matweb.com/search/DataSheet.aspx?MatGUID=e6eb83327e534850a062dbca3bc758dc&ckck= 1〉.
81. Characterization and Temperature dependent DC conductivity study of bio templated nickel oxide nanoparticles (NiO) and their composites using polyaniline (PANI)10.1016/j.matchemphys.2019.122469 ↗
82. Tuning the p-type conductivity of NiO for the room temperature formaldehyde detection10.1016/j.inoche.2023.110445 ↗
83. Gamsjäger · 2005
84. The impact of alkali elements on the degradation of CIGS solar cells: degradation of CIGS solar cells10.1002/pip.2610 ↗
85. The influence of relative humidity upon Cu(In,Ga)Se2 thin-film surface chemistry: an X-ray photoelectron spectroscopy study10.1016/j.apsusc.2021.151898 ↗
86. Degradation mechanism in Cu(In,Ga)Se2 material and solar cells due to moisture and heat treatment of the absorber layer10.1109/JPHOTOV.2019.2912707 ↗
87. Effect of a Mo back contact on Na diffusion in CIGS thin film solar cells: effect of a Mo back contact on Na diffusion10.1002/pip.2193 ↗
88. Impact of Na diffusion on Cu(In, Ga)Se2 solar cells: Unveiling the role of active defects using thermal admittance spectroscopy10.1016/j.tsf.2023.139673 ↗
89. Impact of Na2MoO4 nanolayers autogenously formed on tunnel-type Na0.44MnO210.1039/C9TA03844B ↗