Microstructural evolutions, elastic properties and mechanical behaviors of W/Cr Co-doped Bi 4 Ti 3 O 12 ceramics
Source abstract
Abstract
Abstract For Aurivillius phase Bi4Ti3 − xWxO12 + x + 0.2 wt.% Cr2O3 (BTWx-C, x = 0–0.1) ceramics prepared by a conventional ceramic process, plate-like grains with random orientations are formed there. The aspect ratio of grains increases after the doping of W for ceramics, at the same time the bulk density of ceramics decreases. The change of Poisson's ratio may be related to the change of bulk density, whilst the change of bond strength could be responsible for the change of Young's modulus. The large-grained samples tend to possess a lower frequency constant but a higher elastic compliance, as well as a lower hardness. Especially, a larger grain size provides a higher fracture toughness for the sample at x = 0.05 due to the mechanism of crack deflection. The stress–strain curves of BTWx-C ceramics under a uniaxial compression load are characterized as three stages: linear elastic deformation, ferroelastic domain switch and microcrack propagation. The microcrack propagation along grain boundaries results in the final axial flerry of ceramics. Additionally, the fracture strength of ceramics may be largely influenced by the internal stress resulted from the paraelectric–ferroelectric phase transformation during sintering.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Mixed bismuth oxides with layer lattices. 1. The structure type of CaNb2Bi2O9
2. Transferring lead-free piezoelectric ceramics into application10.1016/j.jeurceramsoc.2014.12.013 ↗
3. Herbert · 1982
4. Materials of Bi4Ti3O12 type for high temperature acoustic piezo-sensors10.1016/S0924-4247(99)00223-X ↗
5. Lanthanum-substituted bismuth titanate for use in non-volatile memories10.1038/44352 ↗
6. Encapsulating Bi2Ti2O7 (BTO) with reduced graphene oxide (RGO): an effective strategy to enhance photocatalytic and photoelectrocatalytic activity of BTO10.1021/am503396r ↗
7. Leakage mechanisms in rare-earth (La, Nd) doped Bi4Ti3O12 ferroelectric ceramics
8. Microstructure, electrical conductivity, and piezoelectric properties of bismuth titanate10.1111/j.1151-2916.1996.tb08086.x ↗
9. Crystallographic evolution, dielectric, and piezoelectric properties of Bi4Ti3O12:W/Cr ceramics10.1111/j.1551-2916.2009.03582.x ↗
10. Microstructures, dielectric, and piezoelectric properties of W/Cr co-doped Bi4Ti3O12 ceramics10.1063/1.4893366 ↗
11. Crystalline structure, ferroelectric properties, and electrical conduction characteristics of W/Cr co-doped Bi4Ti3O12 ceramics10.1016/j.jallcom.2014.05.136 ↗
12. Microscale 1–3-type (Na, K) NbO3-based Pb-free piezocomposites for high-frequency ultrasonic transducer applications10.1111/j.1551-2916.2011.04508.x ↗
13. Microdisplacement characteristics and microstructures of functionally graded piezoelectric ceramic actuator10.1016/S0261-3069(00)00021-2 ↗
14. Dynamic observation of crack propagation in piezoelectric multilayer actuators10.1111/j.1151-2916.1993.tb03950.x ↗
15. Control of functional microstructure in WO3-doped Bi4Ti3O12 ceramics10.1111/j.1551-2916.2008.02293.x ↗
16. Factors affecting the electrical conductivity of donor-doped Bi4Ti3O12 piezoelectric ceramics10.1111/j.1151-2916.1999.tb02098.x ↗
17. Rahaman · 2003
18. Li · 2008
19. IEEE · 1987
20. Poisson's ratio and modern materials10.1038/nmat3134 ↗
21. Non-Metallic Solids
22. Structural basis of ferroelectricity in the bismuth titanate family10.1016/0025-5408(71)90082-1 ↗
23. Temperature dependence of piezoelectric properties on Nd and V co-substituted Bi4Ti3O12 ceramics for ceramic resonator applications10.1016/j.ceramint.2007.10.022 ↗
24. Randall · 1998 · 500 · 6
25. Ferroelectric properties of Pb(Zr0.53Ti0.47)O3 ceramics synthesized by partial oxalate method (using Zr0.53Ti0.47O2 hydrothermal produced powder as a core of Pb(Zr0.43Ti0.47)O3)10.7567/JJAPS.28S2.63 ↗
26. The effect of high energy mechanochemical processing on the microstructure, piezoelectric, ferroelectric and mechanical properties of PLZT ceramics10.1088/0957-4484/19/19/195201 ↗
27. Nanomechanics of Hall–Petch relationship in nanocrystalline materials10.1016/j.pmatsci.2009.03.008 ↗
28. Influence of hot pressing sintering temperature and time on microstructure and mechanical properties of TiB2 ceramics10.1016/S0955-2219(01)00424-1 ↗
29. Grain size dependence of the fracture toughness of silicon nitride ceramics10.2109/jcersj.99.320 ↗
30. Nonlinear constitutive behaviour of ferroelectric materials10.1007/s11433-008-0140-4 ↗
31. Comparison of the temperature-dependent ferroelastic behaviour of hard and soft lead zirconate titanate ceramics10.1111/j.1551-2916.2010.03801.x ↗
32. Ferroelectric and ferroelastic piezoceramics—modeling of electromechanical hysteresis phenomena10.1007/s001610100052 ↗
33. Aging behaviour and electric field induced-domain stabilization in Cr2O3-doped Pb(Zr0.525Ti0.475)O3 system
34. Fabrication, sinterability, and mechanical properties of lead zirconate titanate/silver composites10.1111/j.1151-2916.1999.tb02099.x ↗