Simultaneously improved surface hardness and thermal diffusivity of carbon nanotube/zinc silicate composites via colloidal processing
Source abstract
Abstract
Materials with ideal thermal dissipation can prevent electronic devices from overheating and sustaining internal damage. However, obtaining passive heat sink materials with a well-distributed thermal transport network remained challenging. In this study, carbon nanotubes (CNTs) reinforced zinc silicate (Zn2SiO4) composites (CNTs/ZS) were fabricated via colloidal processing and pressureless sintering. The CNTs was first dispersed in 1,2,3,4-tetrahydronapathalene (C10H12) through sonication, before composite-mixing and densification with zinc silicate ceramic. It revealed that the dispersed CNTs simultaneously improved the mechanical and thermal properties of the composites, along with reducing relative density. The Vickers hardness, thermal diffusivity, and thermal conductivity of the optimized composite containing 1.0 wt% CNTs increased by 42%, 179%, and 537%, respectively, compared to the pristine ZS. The SEM observation on the 1.0 wt% CNTs/ZS composite surface determined that the area fraction of the CNTs inclusions was approximately 60%, which was advantageous for phonon propagation and electron transmission path. The combined effect of the phonon and electron transmission path outperformed the polycrystalline-induced Umklapp scattering and porosity-induced phonon-pore scattering, which were identified as obstacles to the heat-transfer process. Thus, this CNTs reinforcement through colloidal processing can be a strategy for designing of efficient silicate-based heatsink candidates in optoelectronic applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thermal properties of materials · Thermal Radiation and Cooling Technologies · Carbon Nanotubes in Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (95)
Show source-provided references
1. Pure and cerium-doped zinc orthosilicate as a pigment for thermoregulating coatings10.1016/j.ceramint.2019.10.239 ↗
2. Tunable blue and green emissions of sol–gel synthesized transparent nano-willemite codoped with nano-pyroxmangite and dysprosium10.1016/j.nanoso.2021.100685 ↗
3. Exploring Eu3+-doped ZnO-SiO2 glass derived by recycling renewable source of waste rice husk for white-LEDs application10.1016/j.rinp.2019.102596 ↗
4. Tunnel-structured willemite Zn2SiO4: electronic structure, elastic, and thermal properties10.1007/s40145-022-0607-1 ↗
5. Helical microtubules of graphitic carbon10.1038/354056a0 ↗
6. A review of aligned carbon nanotube arrays and carbon/carbon composites: fabrication, thermal conduction properties and applications in thermal management10.1016/S1872-5805(21)60090-2 ↗
7. Corrosion, mechanical and thermal properties of aluminium alloy metal matrix nano composites (AA-MMNCs) with multi-walled carbon nanotubes10.1007/s42452-020-3081-9 ↗
8. Thermal conductivity of shape memory polymer nanocomposites containing carbon nanotubes: a micromechanical approach10.1016/j.compositesb.2018.11.003 ↗
9. Effect of carbon nanotubes on the microstructure and properties of plasma electrolytic oxidized ceramic coatings on high silicon aluminum alloy10.1016/j.jmrt.2022.04.035 ↗
10. Synergistic reinforcement of carbon nanotubes and silicon carbide for toughening tantalum carbide based ultrahigh temperature ceramic10.1557/jmr.2016.65 ↗
11. High-performance electric and optical biosensors based on single-walled carbon nanotubes10.1016/j.jlumin.2022.119084 ↗
12. Improving thermal and mechanical properties of the alumina filled silicone rubber composite by incorporating carbon nanotubes10.1016/S1872-5805(20)60476-0 ↗
13. Electrical and thermal conductivity of CNT/alumina‐nanocomposite ceramics
14. An experimental study on mechanical and thermal properties of structural lightweight concrete using carbon nanotubes (CNTs) and LECA aggregates after exposure to elevated temperature10.1016/j.conbuildmat.2022.128376 ↗
15. Recent developments in carbon nanotubes-reinforced ceramic matrix composites: a review on dispersion and densification techniques10.3390/cryst11050457 ↗
16. Fabrication and investigation on ternary heterogeneous MWCNT@TiO2-C fillers and their silicone rubber wave-absorbing composites10.1016/j.compositesa.2019.105714 ↗
17. Fe7C3 nanoparticles with in situ grown CNT on nitrogen doped hollow carbon cube with greatly enhanced conductivity and ORR performance for alkaline fuel cell10.1016/j.carbon.2020.12.070 ↗
18. Rare earth free oxide nano-composite of SrTi0.85Nb0.15O3 and CNT for potential n-type thermoelectrics10.1016/j.carbon.2022.11.039 ↗
19. Molecular level mixing: an approach for synthesis of homogenous hybrid ceramic nanocomposite powders10.1016/j.powtec.2015.12.012 ↗
20. Carbon nanotubes as a unique agent to fabricate nanoceramic/metal composite powders for additive manufacturing10.1016/j.matdes.2017.10.034 ↗
21. Reinforcing capability of multiwall carbon nanotubes in alumina ceramic hybrid nanocomposites containing zirconium oxide nanoparticles10.1016/j.ijrmhm.2019.105018 ↗
22. Constructing n-type Ag2Se/CNTs composites toward synergistically enhanced thermoelectric and mechanical performance10.1016/j.actamat.2021.117502 ↗
23. Improvement in tribological properties of plasma-sprayed alumina coating upon carbon nanotube reinforcement10.1007/s11665-019-04482-5 ↗
24. Tuning the optical bandgap of multi-walled carbon nanotube-modified zinc silicate glass-ceramic composites10.1016/j.ceramint.2021.04.017 ↗
25. The three dimensional solubility parameter and solvent diffusion coefficient. Their importance in surface coating formulation
26. X-ray line broadening from filed aluminium and wolfram10.1016/0001-6160(53)90006-6 ↗
27. Geophysics as an exploration tool for willemite - a case study of the Beltana-Reliance-Aroona zinc deposits, Northern Flinders Ranges, South Australia
28. The effect of nanotube waviness and agglomeration on the elastic property of carbon nanotube-reinforced composites10.1115/1.1751182 ↗
29. Effective elastoplastic properties of carbon nanotube-reinforced aluminum nanocomposites considering the residual stresses10.1016/j.jallcom.2018.04.168 ↗
30. Preparation of Co3O4@carbon nanotubes modified ceramic membrane for simultaneous catalytic oxidation and filtration of secondary effluent10.1016/j.cej.2022.140450 ↗
31. Reactivities of transition metals with carbon: implications to the mechanism of diamond synthesis under high pressure10.1016/S0263-4368(97)00003-6 ↗
32. Time and temperature dependence of the solubility of carbon in liquid silicon equilibrated with silicon carbide and its dependence on boron levels10.2320/matertrans.M2009034 ↗
33. Solubility of carbon in liquid silicon equilibrated with silicon carbide10.2320/matertrans1989.38.990 ↗
34. Grains, phases and interfaces: interpretation of microstructures
35. Water-assisted growth of graphene on carbon nanotubes by the chemical vapor deposition method10.1039/c3nr33855j ↗
36. Perspectives on carbon nanotubes and graphene Raman spectroscopy10.1021/nl904286r ↗
37. John Wiley and Sons (Inc.), SpectraBase Compound ID=3IaXq9hN0c6 SpectraBase Spectrum ID=4PAsbe0uoOp, (n.d.). https://spectrabase.com/spectrum/8MGwrNEqOKg (accessed September 6, 2022).
38. Superior high-temperature tensile properties of aluminum matrix composites reinforced with carbon nanotubes10.1016/j.carbon.2022.02.009 ↗
39. Reinforcing effects of carbon nanotubes in structural aluminum matrix nanocomposites10.1557/jmr.2009.0318 ↗
40. Moulder · 1992
41. Influence of carbon dioxide plasma treatment on the dry adhesion of vertical aligned carbon nanotube arrays10.1088/1361-6528/ab903f ↗
42. 2022
43. Effect of silicon addition on the microstructure, mechanical and thermal properties of Cf/SiC composite prepared via selective laser sintering10.1016/j.jallcom.2019.04.129 ↗
44. Reactive sintering of TiB2-SiC-CNT ceramics10.1016/j.ceramint.2019.07.317 ↗
45. Preparation of carbon nanotube/SiO2 composite films and their tensile properties in harsh wet environments10.1016/j.carbon.2022.08.052 ↗
46. Enhancement of strength and ductility by interfacial nano-decoration in carbon nanotube/aluminum matrix composites10.1016/j.carbon.2019.12.038 ↗
47. Improved thermal conductivities of vertically aligned carbon nanotube arrays using three-dimensional carbon nanotube networks10.1016/j.carbon.2022.05.050 ↗
48. Microstructure-property relationships in pressureless-sintered carbon nanotube/alumina composites10.1016/j.msea.2014.08.068 ↗
49. The sintering and grain growth behaviour of ceramic-carbon nanotube nanocomposites10.1016/j.compscitech.2010.02.010 ↗
50. Study on metallurgically prepared copper-coated carbon fibers reinforced aluminum matrix composites10.1007/s12540-020-00897-1 ↗
51. Micro-hardness behavior of fiber reinforced thermosetting composites embedded with cellulose nanocrystals10.1016/j.aej.2018.10.012 ↗
52. Dispersion of multiwalled carbon nanotubes into a diglyme solution, electrodeposition of aluminum-based composite, and improvement of hardness10.1016/j.jallcom.2019.152585 ↗
53. Estimation of the volume resistivity of electrically conductive composites10.1002/pc.10324 ↗
54. Dynamics of Na ion in the amorphous Na2Si2O5 using quasielastic neutron scattering and molecular dynamics simulations10.1103/PhysRevMaterials.4.045802 ↗
55. Sintering and devitrification of glass-powder compacts in the akermanite-gehlenite system10.1007/s10853-013-7225-9 ↗
56. Temperature dependence of the conductivity, thermopower, and heat capacity of TlCoS210.1063/1.1704615 ↗
57. Titania/carbon nanotube composite (TiO2/CNT) and its application for removal of organic pollutants10.1007/s10098-013-0581-y ↗
58. Interconnected Bi5Nb3O15@CNTs network as high-performance anode materials of Li-ion battery10.1007/s12598-022-02049-3 ↗
59. Electron mean free path in elemental metals10.1063/1.4942216 ↗
60. Conductivity of ZnO nanowires, nanoparticles, and thin films using time-resolved terahertz spectroscopy10.1021/jp064399a ↗
61. Electron mean free path in fused silica and optical fiber preform10.1063/1.1707205 ↗
62. Electron mean-free path for CNT in vertical interconnects approaches Cu
63. Graphene/BiVO4/TiO2 nanocomposite: tuning band gap energies for superior photocatalytic activity under visible light10.1007/s10853-017-1002-0 ↗
64. Factors that affect network formation in carbon nanotube composites and their resultant electrical properties10.3390/jcs4030100 ↗
65. Effects of GNP addition on optical properties and band gap energies of PMMA films10.1002/pc.24948 ↗
66. Low percolation threshold in highly conducting graphene nanoplatelets/glass composite coatings10.1016/j.carbon.2018.07.030 ↗
67. Lightweight and strong exfoliated graphite/polyvinyl alcohol monoliths with highly thermo/electro conductivity for advanced thermal/EMI management10.1016/j.carbon.2022.12.028 ↗
68. Tuning the dielectric characteristics and energy storage properties of Ni-ZnO/rGO nanocomposite10.1016/j.vacuum.2022.111375 ↗
69. The thermal degradation of poly(vinyl alcohol)10.1016/S0032-3861(01)00166-5 ↗
70. Catalytic effect of different forms of iron in purification of single-walled carbon nanotubes10.1166/jnn.2010.1970 ↗
71. Fabrication of scalable, aligned and low density carbon nanotube/silicon carbide hybrid foams by polysilazane infiltration and pyrolysis10.1016/j.jeurceramsoc.2020.12.035 ↗
72. Structural and thermal diffusivity of Sm3+ doped willemite glass ceramics system from waste materials10.4028/www.scientific.net/SSP.268.117 ↗
73. Effect of bismuth oxide on structural and thermal diffusivity of waste rice ash zinc silicate (willemite) glass ceramics10.1007/s41779-017-0115-x ↗
74. The thermal conductivity of metals10.1017/S0305004100020442 ↗
75. Temperature dependent electrical conductivity of CNT–PEEK composites10.1016/j.compscitech.2011.08.018 ↗
76. Thermal conductivity of carbon nanotube networks: a review10.1007/s10853-019-03368-0 ↗
77. Influence of electron–phonon interaction on the lattice thermal conductivity in single‐crystal Si10.1002/andp.201900435 ↗
78. Thermal conductivity and air-mediated losses in periodic porous silicon membranes at high temperatures10.1038/s41467-017-00115-4 ↗
79. Viscosity and thermal conductivity of dry air in the gaseous phase10.1063/1.555744 ↗
80. Thermal transport measurements of individual multiwalled nanotubes10.1103/PhysRevLett.87.215502 ↗
81. Thermal diffusivity and conductivity of multiwalled carbon nanotube arrays10.1016/j.physleta.2007.02.079 ↗
82. Mechanical, thermal and electrical properties of nanostructured CNTs/SiC composites10.1016/j.ceramint.2018.10.187 ↗
83. Influence of carbon nanotubes on thermal and electrical conductivity of zirconia-based composite10.1016/j.ceramint.2023.01.129 ↗
84. Dielectric composite reinforced by in-situ growth of carbon nanotubes on boron nitride nanosheets with high thermal conductivity and mechanical strength10.1016/j.cej.2018.10.004 ↗
85. Ueber die Wärme-Leitungsfähigkeit der Metalle10.1002/andp.18531650802 ↗
86. Bolometric properties of semiconducting and metallic single-walled carbon nanotube composite films10.1021/ph500285r ↗
87. Enhancing the thermoelectric performance of Cu–Ni alloys by introducing carbon nanotubes, Mater
88. Ductile inorganic amorphous/crystalline composite Ag4TeS with phonon-glass electron-crystal transport behavior and excellent stability of high thermoelectric performance on plastic deformation10.1016/j.actamat.2021.117231 ↗
89. On the Lorenz number of multiband materials10.1103/PhysRevB.95.125206 ↗
90. Phonon coherence and its effect on thermal conductivity of nanostructures
91. Electron-phonon scattering effect on the lattice thermal conductivity of silicon nanostructures10.1039/C7CP04638C ↗
92. Reduction of phonon mean free path: from low-temperature physics to room temperature applications in thermoelectricity10.1016/j.crhy.2016.08.008 ↗
93. Enlightening the structural, elastic, and luminescence properties of transparent Zn2SiO4 glass-ceramic by precipitation of Gd2O3 as dopant10.1016/j.optmat.2022.112602 ↗
94. Effects of phonon pore scattering and pore randomness on effective conductivity of porous silicon10.1016/S0017-9310(99)00165-9 ↗
95. Thermal and electrical transport in partly-reduced graphene oxide films: the effect of low temperature and structure domain size10.1016/j.carbon.2022.11.051 ↗