The effect of deliberate aluminium additions on the microstructure of rolled steel plate characterized using EBSD
Source abstract
Abstract
The use of aluminium as a deliberate alloying addition in steels has attracted increased attention recently as a possible replacement for Si in transformation-induced plasticity (TRIP) steels. In addition, some authors have suggested that it offers beneficial effects as a solid solution strengthener as well as galvanizability. In this work three low carbon (0.02 wt.%) manganese (1.4 wt.%) steels have been alloyed with very different aluminium contents (0.02, 0.48 and 0.94 wt.%) in order to study the effect of this alloying element on the final ferritic microstructure. Two different rolling schedules have been applied to these steels and the final microstructures have been characterized extensively by EBSD measurements. The results indicate that aluminiumadditions have a profound influence on ferrite grain size and the grain boundary misorientation distribution functions
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Effects of nitrogen on the mechanical properties of cold rolled TRIP-aided steel sheets10.2355/isijinternational.46.599 ↗
2. Comparison of the effects of silicon and aluminium on the tensile behaviour of multiphase TRIP-assisted steels10.1016/S1359-6462(00)00697-7 ↗
3. High strength Fe–Mn–(Al, Si) TRIP/TWIP steels development — properties — application10.1016/S0749-6419(00)00015-2 ↗
4. Al as a solid solution hardener in Steels10.1179/174328407X248460 ↗
5. Influence of aluminum, cobalt, and silicon upon the kinetics of the proeutectoid ferrite reaction10.1007/BF02645596 ↗
6. The effects of excess aluminum on low-temperature toughness in A302C steels10.2355/isijinternational1966.21.495 ↗
7. The effects of excess aluminum on mechanical properties of Mn–Mo, Mn–Mo–Ni and Mn–Mo–Ni–Cr steels with regard to solute interactions10.2355/isijinternational1966.23.504 ↗
8. Effect of aluminum and nitrogen on the magnetic properties of non-oriented semi-processed electrical steel sheet10.1016/S0304-8853(00)00005-6 ↗
9. Role of aluminum in hot-rolled ultra-low-carbon Nb-interstitial-free steels10.1007/s11661-006-1067-x ↗
10. Understanding the effect of aluminium on microstructure in low level nitrogen steels10.1179/174328409X401133 ↗
11. Understanding the role of aluminium in low level nitrogen steels via microstructural characterisation10.1088/1742-6596/126/1/012019 ↗
12. R. C. Cochrane, unpublished research, Corus, UK.
13. Paper on statistics associated with the random disorientation of cubes10.1093/biomet/45.1-2.229 ↗
14. Aluminum nitride in steel10.1179/095066088790324102 ↗
15. Correlating the aluminum content with ferrite grain size and core loss in non-oriented electrical steel10.2355/isijinternational.44.1273 ↗
16. Effect of absorbed nitrogen on the microstructure and core loss property of non-oriented electrical steel10.2355/isijinternational.45.299 ↗
17. MTDATA, The NPL Software tool for the calculation of phase equilibria and thermodynamic properties, National Physical Laboratory, UK. 2003.
18. Influence of the prior austenite microstructure on the transformation products obtained for C–Mn–Nb steels after continuous cooling10.2355/isijinternational.39.583 ↗
19. Controlled rolling
20. Interpass recrystallization of austenite in some steels during rolling10.1179/030716984803274440 ↗
21. Processing of steel for ultrafine ferrite grain structures
22. EBSD study on the formation of fine ferrite grains in plain carbon steel during warm deformation10.1016/j.matlet.2007.01.019 ↗