Layered heterostructure design to prepare anisotropic multi-component (SmCo5/α-Fe)/Sm0.6Pr0.4Co5 magnet
Abstract not available. Bibliographic information is searchable.
0 citations · source snapshot
JOURNAL PROFILE
MATERIALS CHARACTERIZATION
ELSEVIER SCIENCE INC
Papers in this journal
All search filters12,336 papers
Synergistic enhancement of strength and ductility in LPBF H13 steel via CoCrFeNi addition and heat treatment
Abstract not available. Bibliographic information is searchable.
0 citations · source snapshot
Ti-alloyed laser directed energy deposition SS316L/IN718 gradient materials: Microstructural evolution and performance enhancement
Abstract not available. Bibliographic information is searchable.
0 citations · source snapshot
Ni intermediate layer regulating Cr diffusion and carbide evolution in hot isostatic pressing diffusion bonded Ni-based superalloy/Cu alloy joints
Abstract not available. Bibliographic information is searchable.
0 citations · source snapshot
Enhanced mechanical properties and microstructural uniformity in large-scale steel rods via spray cooling technology: Integrated experimental characterization and simulation validation
Abstract not available. Bibliographic information is searchable.
0 citations · source snapshot
The effect of Ga-In-Sn doping on the phase transition and mechanical response at the Sn-Bi/Cu joint interface for different Bi contents
Abstract not available. Bibliographic information is searchable.
0 citations · source snapshot
Tensile deformation and fracture behaviour of pure titanium at extremely low temperature
Abstract not available. Bibliographic information is searchable.
0 citations · source snapshot
Synergistic improvement of strength-ductility and high-temperature properties via coherent TiB/α interfaces in titanium matrix composites: First-principles and experimental verification
Abstract not available. Bibliographic information is searchable.
0 citations · source snapshot
Synergistic roles of M2C precipitates and reversed austenite in the strengthening and toughening of a CoNi secondary hardening steel
Abstract not available. Bibliographic information is searchable.
0 citations · source snapshot
Influence of Zr addition on the structure, mechanical properties and oxidation resistance of TiN coatings
Abstract not available. Bibliographic information is searchable.
0 citations · source snapshot
Microstructural refinement and enhanced strength-ductility synergy in a strip-cast Al-Co-Cr-Fe-Ni eutectic high-entropy alloy
Abstract not available. Bibliographic information is searchable.
0 citations · source snapshot
Mask-guided fusion for classifying steel inclusions in microstructural images
Abstract not available. Bibliographic information is searchable.
0 citations · source snapshot
Microstructure evolution and dynamic softening mechanism of (Sc, Zr, Sr) micro-alloyed Al-Zn-Mg-Cu alloy during hot deformation
Abstract not available. Bibliographic information is searchable.
0 citations · source snapshot
Multiscale microstructural characterization of strengthening–toughening mechanisms in a 1000 MPa-grade quenched-and-tempered hydropower steel: Role of quenching cooling rate
Abstract not available. Bibliographic information is searchable.
0 citations · source snapshot
Interfacial microstructural evolution governing yielding and plastic deformation in diffusion-bonded GH4099/GH3128 joints
Abstract not available. Bibliographic information is searchable.
0 citations · source snapshot
A novel Ti-based multicomponent filler design strategy for synthesis of discontinuous intermetallic compounds in Ti65/Nb521 brazed joints
Abstract not available. Bibliographic information is searchable.
0 citations · source snapshot
Homogenization of Al-Mg-Mn-Si-Er-Zr alloy: Dissolution and diffusion, dispersoid precipitation and recrystallization resistance
This paper systematically investigated the microstructure evolution and mechanical properties of Al-Mg-Mn-Si-Er-Zr alloy during homogenization. The results shows that the dissolution of β phase is mainly depends on particle size, and the diffusion homogenization of solute element (Mg) in the alloy matrix mainly depends on the grain size. The experimental results of Al-Mg-Mn-Si-…
0 citations · source snapshot
Microstructural and thermodynamic assessment in determining the factors affecting the stability of untransformed austenite post isothermal bainite transformation in a low-carbon low-alloy steel
Abstract not available. Bibliographic information is searchable.
0 citations · source snapshot
Study on dynamic recrystallization mechanism during hot deformation of Haynes 242 Ni-based superalloy
Abstract not available. Bibliographic information is searchable.
0 citations · source snapshot
Atomic-to-macroscopic design of invar 36 joints: Entropy stabilization and magnetic compensation via CoCr interfacial alloying
The intrinsic low yield strength and susceptibility to localized marine corrosion critically restrict the heavy-duty application of Invar 36 (Fe-36Ni) alloy welds. Traditional single-element modifications inevitably trigger a detrimental trade-off between mechanical enhancement and the requisite near-zero thermal expansion. Herein, we propose a synergistic Co-Cr co-alloying str…
0 citations · source snapshot
Page 1 of 500 · refine your search for more specific results