Structure and plasticity in hot deformed FeAl intermetallic phase base alloy
Source abstract
Abstract
Abstract This paper constitutes part of research conducted on the possibility of forming alloys based on intermetallic phases from the Fe–Al system via thermoplastic processing. Insufficient plasticity, which is an inhibitor of further development of these intermetallics as construction materials, makes the range of their applications limited. In the paper, an analysis is conducted of the influence of deformation parameters on the structure of an alloy of Fe–Al with the B2 type structure. Axi-symmetric compression tests were carried out at temperatures ranging from 600 °C to 1200 °C and at a deformation rate from 0.001 s1 to 10 s− 1. Structural examination was carried out using light microscopy and transmission electron microscopy. A quantitative evaluation of the structure was made with the use of “Met-Ilo”. The results obtained will be used for the development of mathematical models determining the influence of deformation parameters on the alloy structure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced materials and composites · Metallurgical and Alloy Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Deformability and recrystallization of Fe–Al intermetallic phase-base alloy
2. The influence of deformation on the plasticity and structure of Fe3Al–5Cr alloy
3. Quantitative description of structure in hot-deformed Fe–Al intermetallic phase base alloy
4. Iron aluminides: present status and future prospects10.1016/S0921-5093(98)00909-5 ↗
5. Studies on preparation, characterization and evaluation of properties of FeAl-based intermetallic alloy of composition Fe–16Al–5.44Cr–1Nb–0.5C10.1016/S0924-0136(01)01008-1 ↗
6. Influence of temperature and strain rate on the flow stress of an FeAl alloy10.1016/S0921-5093(00)01380-0 ↗
7. Processing, properties, and applications of nickel and iron aluminides10.1016/S0079-6425(97)00014-5 ↗
8. Development of high strength, high ductility and high creep resistant iron aluminide10.1016/j.intermet.2004.02.032 ↗
9. Role of computer modeling in thermomechanical processing
10. Kurzydłowski · 2005
11. The grain size as the structural criterion of polycrystal quality evaluation
12. Structure and properties of high-alloy steels