Calculation of contact angles at triple phase boundary in solid oxide fuel cell anode using the level set method
Source abstract
Abstract
Abstract A level set method is applied to characterize the three dimensional structures of nickel, yttria stabilized zirconia and pore phases in solid oxide fuel cell anode reconstructed by focused ion beam-scanning electron microscope. A numerical algorithm is developed to evaluate the contact angles at the triple phase boundary based on interfacial normal vectors which can be calculated from the signed distance functions defined for each of the three phases. Furthermore, surface tension force is estimated from the contact angles by assuming the interfacial force balance at the triple phase boundary. The average contact angle values of nickel, yttria stabilized zirconia and pore are found to be 143°–156°, 83°–138° and 82°–123°, respectively. The mean contact angles remained nearly unchanged after 100 hour operation. However, the contact angles just after reduction are different for the cells with different sintering temperatures. In addition, standard deviations of the contact angles are very large especially for yttria stabilized zirconia and pore phases. The calculated surface tension forces from mean contact angles were close to the experimental values found in the literature. Slight increase of surface tensions of nickel/pore and nickel/yttria stabilized zirconia were observed after operation. Present data are expected to be used not only for the understanding of the degradation mechanism, but also for the quantitative prediction of the microstructural temporal evolution of solid oxide fuel cell anode.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Nuclear Materials and Properties · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Subhash · 2003
2. The triple phase boundary, a mathematical model and experimental investigations for fuel cells
3. Quantitative characterization of SOFC nickel–YSZ anode microstructure degradation based on focused-ion-beam 3D-reconstruction technique10.1149/2.045203jes ↗
4. Quantification of SOFC anode microstructure based on dural beam FIB-SEM technique10.1016/j.jpowsour.2009.09.005 ↗
5. Detailed characterization of anode-supported SOFCs by impedance spectroscopy10.1149/1.2433311 ↗
6. Chen · 2011
7. Surface and grain-boundary energies in yttria-stabilized zirconia (YSZ-8mol%)10.1007/BF01159310 ↗
8. Kinetic Monte Carlo simulations of microstructural evolution in solid oxide fuel cell cermet anode
9. Quantitative study on the correlation between solid oxide fuel cell Ni–YSZ composite anode performance and sintering temperature based on three-dimensional reconstruction10.1149/2.056207jes ↗
10. Fronts propagating with curvature dependent speed: algorithms based on Hamilton Jacobi formulations10.1016/0021-9991(88)90002-2 ↗
11. Osher · 2003
12. Suri · 2002
13. RIKEN
14. Simulation of coarsening in the three-phase solid oxide fuel cell anodes10.1016/j.jpowsour.2010.08.010 ↗
15. Interfacial properties and structure stability of Ni/Y-2 O-3-ZrO2–TiO2 cermet anodes for solid oxide fuel cells10.1007/s10853-005-1977-9 ↗