A quasi-in-situ EBSD observation of the transformation from rolling texture to recrystallization texture in V-4Cr-4Ti alloy
Source abstract
Abstract
Abstract Recrystallization texture evolution of rolled V-4Cr-4Ti alloy has been investigated by quasi-in-situ EBSD (electron back-scattering diffraction) method. Concurrently, the precipitates were characterized by SEM (Scanning Electron Microscopy). It was found that both the initial rolling textures and the distribution of the precipitates affected the formation of the recrystallization texture. It was revealed that the texture transformations of {558} 〈110〉 + {665} 〈110〉 to {334} 〈483〉 + {665} 〈1 1 2.4〉 were possibly attributed to the selective drag induced by the sparsely dispersed Ti-rich precipitates. While the densely distributed Ti-rich precipitates were responsible for the randomized recrystallization texture. Finally, when the precipitates were absent, the orientation changes from {112} 〈110〉 and {558} 〈110〉 to {111} 〈112〉 and {001} 〈110〉 to {001} 〈520〉 were observed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fusion materials and technologies · Hydrogen embrittlement and corrosion behaviors in metals · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Reference vanadium alloy V-4Cr-4Ti for fusion application10.1016/S0022-3115(96)00231-0 ↗
2. Vanadium alloys - overview and recent results10.1016/S0022-3115(02)01253-9 ↗
3. Overview of the vanadium alloy researches for fusion reactors10.1016/j.jnucmat.2011.02.015 ↗
4. Present status of vanadium alloys for fusion applications10.1016/j.jnucmat.2014.06.025 ↗
5. French investigation of a new V-4Cr-4Ti grade: CEA-J57 - fabrication and microstructure10.1016/j.jnucmat.2012.03.029 ↗
6. Texture in the design of advanced steels10.1007/s12666-013-0299-x ↗
7. Zhang · 1976
8. Grain refinement of pure vanadium by equal channel angular pressing10.1016/j.msea.2007.06.052 ↗
9. Textural and microstructural evolutions during deformation and annealing of Nb-1% Zr-0.1%C (wt%) alloy10.1016/j.msea.2013.07.058 ↗
10. Examination of fabrication process parameters for improvement of low-activation vanadium alloys10.1016/S0920-3796(02)00258-2 ↗
11. Recrystallization and precipitation behavior of low-activation V-Cr-Ti alloys after cold rolling10.1016/j.jnucmat.2003.10.012 ↗
12. The formation of precipitates and its effect on grain structure in V-4Cr-4Ti alloys with yttrium addition10.1016/j.jallcom.2016.10.112 ↗
13. Recrystallization texture development in commercial Al-Mn-Mg alloys10.1016/1359-6454(95)00290-1 ↗
14. Precipitation and texture formation in two cold rolled and batch annealed interstitial-free high strength steels10.1016/j.scriptamat.2006.03.043 ↗
15. Effect of the size and dispersion of precipitates formed in hot rolling on recrystallization texture in ferritic stainless steels10.1007/s10853-012-7027-5 ↗
16. An evaluation of procedures in quantitative metallography for volume-fraction analysis
17. A comparison of textures measured using x-ray and electron backscatter diffraction10.1007/s11661-007-9226-2 ↗
18. Relationship between deformation and recrystallisation textures of fcc and bcc metals
19. Effect of high temperature annealing on texture and microstructure on an AISI-444 ferritic stainless steel10.1016/j.matchar.2006.02.015 ↗
20. Microstructure and texture of Nb+Ti stabilized ferritic stainless steel10.1016/j.matchar.2008.03.018 ↗
21. Effect of intermediate annealing on texture, formability and ridging of 17%Cr ferritic stainless steel sheet10.1016/S0921-5093(00)01995-X ↗
22. Texture development and formability of strip cast 17% Cr ferritic stainless steel10.2355/isijinternational.49.890 ↗
23. Re-evaluation of the Ibe-Lucke growth selection experiment in a Fe-Si single crystal10.1016/j.actamat.2005.02.030 ↗
24. The evolution of recrystallization textures from deformation textures10.1016/0956-716X(95)00256-U ↗
25. The evolution of recrystallization textures in body centred cubic metals10.1016/S1359-6454(98)00052-4 ↗
26. Young's modulus surface and Poisson is ratio curve for cubic metals10.1016/j.jpcs.2007.01.025 ↗
27. Selective particle drag during primary recrystallization of Fe-Cr alloys10.1016/0956-716X(92)90361-H ↗
28. gamma-Fibre recrystallization texture in IF-steel: an investigation on the recrystallization mechanisms10.1016/S0921-5093(97)00455-3 ↗
29. Evolution of recrystallization texture in nonoriented electrical steels10.1016/S1359-6454(03)00115-0 ↗
30. Texture development in Al-1.8wt% Cu depending on the precipitation state-II. Recrystallization textures