journal article·2021-02

New insights of the peritectic phase transition in steel through in-situ measurement of thermal response in a high-temperature confocal microscope

Suk-Chun Moon, Dominic Phelan, Rian Dippenaar

Publisher page

Abstract

Abstract The topic of peritectic phase transition in steel has been widely studied using various in-situ experimental techniques including visual observation on a surface of a sample in a high temperature microscope and measurement of the thermal response from the bulk of the sample using differential thermal analysis (DTA) and differential scanning calorimetry (DSC). These two different techniques have inherent limitations leading to difficulties in interpretation of the results in the case of complex phase transformations such as the peritectic reaction, and there have been discrepancies among the interpretations from many previous studies of the peritectic transition in steel. A new technique was developed through a spatial combination of a DTA apparatus and a high-temperature laser-scanning confocal microscope to overcome these limitations. Solidification experiments with carbon steels of 0.061, 0.182 and 0.451 wt%C were conducted under conditions typical of conventional thermal analysis experiment, i.e. 90 mg of sample mass and 10 °C/min cooling rate, and the findings of earlier studies were revisited. We concluded that whether or not a peritectic reaction in a steel specimen of peritectic composition occurs, largely depends on the size of the sample used in the experiment. Deep undercooling for austenite nucleation can be experienced, in the absence of the occurrence of a peritectic reaction as a result of constrained nucleation of austenite, due to a limited number of nucleation sites in the small samples used.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgical Processes and Thermodynamics · Solidification and crystal growth phenomena · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. In-situ observations of events in liquid and solidifying steel using confocal scanning laser microscopy
2. Concentric solidification for high temperature laser scanning confocal microscopy10.2355/isijinternational.44.565 ↗
3. Ludlow · 2002 · 206
4. Sengupta · 2008
5. A mold simulator for continous casting of steel: Part2. The formation of oscillation marks during the continuous casting of low carbon steel10.1007/s11663-005-0066-4 ↗
6. Hiebler · 1999 · 70 · 349
7. The peritectic phase transition of steel during the initial stages of solidification in the mold
8. Bernhard · 2002 · 131
9. Equilibrium and nonequilibrium peritectic transformations10.1016/0001-6160(74)90077-7 ↗
10. Microstructure evolution during the solidification of steel10.2355/isijinternational.46.786 ↗
11. Kinetics of peritectic reaction and transformation in Fe-C alloys10.1007/s11663-000-0074-3 ↗
12. Kinetics of the peritectic reaction in an Fe–C alloy10.1016/j.msea.2007.05.090 ↗
13. Mechanism of the peritectic phase transition in Fe-C and Fe-Ni alloys under conditions close to chemical and thermal equilibrium10.2355/isijinternational.54.466 ↗
14. Diffusional constrained crystal nucleation during peritectic phase transitions10.1016/j.actamat.2013.12.018 ↗
15. Identification of defect prone peritectic steel grades by analyzing high-temperature phase transformations10.1007/s11661-013-1671-5 ↗
16. Linking up of HT-LSCM and DSC measurements to characterize phase diagrams of steels
17. Characterisation of solidification using combined confocal scanning laser microscopy with infrared thermography10.1016/j.matchar.2017.02.025 ↗
18. Investigation of peritectic behavior of steel using a thermal analysis technique10.1007/s11661-019-05148-6 ↗
19. Differential scanning calorimetry study of peritectic steel grades10.1007/s10973-014-4302-5 ↗
20. A novel approach for interpreting the solidification behaviour of peritectic steels by combining CSLM and DSC10.1016/j.matchar.2017.09.013 ↗
21. Investigations of the peritectic reaction and transformation in a hypo-peritectic steel: using high-temperature confocal scanning laser microscopy and differential scanning calorimetry
22. Phelan · 2017
23. Development of HT-LSCM techniques for the in situ study of the peritectic phase transition
24. Austenite grain growth and the surface quality of continuously cast steel10.1007/s11663-013-9844-6 ↗
25. Kinetics of the peritectic phase transformation : in-situ measurements and phase field modeling10.1007/s11661-006-0071-5 ↗
26. Investigation of the peritectic phase transition in a commercial peritectic steel under different cooling rates using in situ observation10.1007/s11663-019-01758-y ↗