journal article·2025-12

Enhancing adhesion of M7C3/α-Fe interface in hypereutectic Fe-Cr-C alloys via Y doping: Experiments and first-principles

Yuenian He, Jibo Wang, Sha Liu, Zhijun Shi, Qizhen He, Xuejun Ren, Jing Guo, Qingxiang Yang

Publisher page

Abstract

The hypereutectic Fe-Cr-C alloys fail prematurely as the primary M7C3 carbide peel off from the matrix, shortening their service life. In this work, the microstructural features of Fe-Cr-C and Fe-Cr-C-Y alloys were analyzed via optical microscopy and high-resolution transmission electron microscopy, the latter providing insights into carbide morphology and elemental distribution. To complement experimental observations, first-principles calculations were used to assess the impact of Y doping on the adhesion work, interfacial stability, and electronic performances of the M7C3//α-Fe interface. Experimental results demonstrate that Y addition reduces the dimensions of primary M7C3 carbides and enhances their size uniformity. Computational modeling identifies three interfacial configurations of Fesingle bondFe, Crsingle bondFe, and Csingle bondFe at the α-Fe(111)//Fe3Cr4C3(1010) interface. Among these, the Crsingle bondFe configuration shows the highest thermodynamic stability, explicitly state the interfacial adhesion work (1.654 J/m2) and interfacial energy (−1.630 J/m2). Two Y-doped models of this interface (Cr-FeI and Cr-FeII) were further examined. The Cr-FeII system displays a more extensive electron accumulation zone and greater interfacial adhesion strength than Cr-FeI. Therefore, Y doping improves the adhesion characteristics between M7C3 carbides and α-Fe matrix, providing a novel strategy for developing advanced Fe-Cr-C alloys with enhanced durability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Effect of Cr:C ratio on open three-body wear resistance of squeeze cast high chromium cast iron10.1016/j.triboint.2024.110315 ↗
2. Microstructure and wear resistance of Fe-based hardfacing layer prepared by flux-cored wire feeding MAG welding process
3. Evaluation of elastic constants of M23C6 and M7C3 embedded in Fe-Cr-C alloys using in-situ XRD tensile test and self-consistent model10.1016/j.mtla.2024.102274 ↗
4. Investigation of microstructure evolution and mechanical properties of near-eutectic Fe2- y CoNiCr y C x high entropy cast iron10.1016/j.intermet.2022.107805 ↗
5. Influences of boron on the microstructural characteristics and wear performance of hypereutectic Fe-Cr-C-Mo-xB hardfacing alloy10.1016/j.surfcoat.2024.130415 ↗
6. Effect of nitrogen alloying on the microstructure and abrasive impact wear resistance of Fe-Cr-C-Ti-Nb hardfacing alloy10.1016/j.surfcoat.2016.10.029 ↗
7. Microstructure and wear resistance of the hypereutectic Fe–Cr–C alloy hardfacing metals with different La2O3 additives10.1016/j.apsusc.2013.10.186 ↗
8. Xu · 1995
9. Insights into refinement mechanism of primary M7C3 carbide by La2O3 via experiments and first-principles calculations10.1016/j.jmrt.2024.02.130 ↗
10. Effects of Ce doping on mechanical properties of M7C3 carbides in hypereutectic Fe-Cr-C hardfacing alloy10.1016/j.jallcom.2020.156656 ↗
11. Investigations on microstructures and properties of (Fe, Cr, W)7C3 carbides by first principles and experiments10.3390/coatings12091363 ↗
12. The formation of TiC-NbC core-shell structure in hypereutectic high chromium cast iron leads to significant refinement of primary M7C310.1016/j.jallcom.2020.153806 ↗
13. Study on the effect of rare earth elements La, Ce, Y and Sc doping on the mechanical properties of aluminum–lithium alloys10.1016/j.apsusc.2024.161334 ↗
14. Effects of rare earth metals on steel microstructures10.3390/ma9060417 ↗
15. Effect of rare earth element Y addition on the corrosion resistance of Cu-12.5Ni-5Sn alloy after aging10.1016/j.jallcom.2024.175905 ↗
16. Effect of rare earth element Y on the crack propagation behavior of Mg alloys: a molecular dynamics simulation10.1016/j.physleta.2024.130005 ↗
17. Y effects on the cu-Zr-Fe alloys’ aging behavior and properties10.1016/j.jallcom.2024.173418 ↗
18. Refinement and homogenization of M7C3 carbide in hypereutectic Fe-Cr-C coating by Y2O3 and TiC10.1016/j.matchar.2017.08.004 ↗
19. Effects of Y dopant on mechanical properties and electronic structures of M7C3 carbide in Fe-Cr-C hardfacing coating10.1016/j.apsusc.2020.148108 ↗
20. Interface bonding and mechanical properties of copper/graphene interface doped with rare earth elements: first principles calculations10.1016/j.physe.2022.115260 ↗
21. The interface bonding properties of Mg/SiC composite doped with Zr, Al, and Zn elements: a first-principles study
22. First-principle and experimental investigation into the interfacial characters of Ti-doped ZTA and high chromium cast iron10.1016/j.ceramint.2024.08.368 ↗
23. Adhesion, bonding and tensile properties of Ti doped WC (001)/diamond (111) interface: a first-principles calculation10.1016/j.ijrmhm.2022.106075 ↗
24. Li · 2024 · 142 · 110828
25. Ab initio molecular dynamics for liquid metals10.1103/PhysRevB.47.558 ↗
26. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
27. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
28. Refinement effect of TiC on ferrite by molecular statics/dynamics simulations and first-principles calculations10.1016/j.jallcom.2017.10.101 ↗
29. Calculation of the lattice constant of solids with semilocal functionals
30. Shao · 2021 · 211 · 110133
31. Experiments and calculations on refining mechanism of NbC on primary M7C3 carbide in hypereutectic Fe-Cr-C alloy10.1016/j.jallcom.2017.04.167 ↗
32. Tailoring the anisotropic mechanical properties of hexagonal M7X3 (M¼Fe, Cr, W, Mo; X¼C, B) by multialloying10.1016/j.actamat.2019.03.015 ↗
33. The effect of carbide and nitride additions on the heterogeneous nucleation behavior of liquid iron10.1007/BF02642799 ↗
34. Surface energies, work functions, and surface relaxations of low index metallic surfaces from first-principles10.1103/PhysRevB.80.235407 ↗
35. Probing the stability, adhesion strength, and fracture mechanism of Mg/Al2Y interfaces via first-principles calculations
36. Effects of TiC addition on the interface stability, microstructure, and mechanical properties of IN718 fabricated by laser direct metal deposition: a combined experimental, DFT and MD study10.1016/j.intermet.2024.108268 ↗
37. Effects of alloying element on the interface stability of fcc-Fe/NbC by first principles investigation
38. Extracting convergent surface energies from slab calculations10.1088/0953-8984/8/36/005 ↗