journal article·2012-05

Characterisation of Ga-coated and Ga-brazed aluminium

E. Ferchaud, F. Christien, V. Barnier, P. Paillard

Publisher page

Abstract

Abstract This work is devoted to the brazing of aluminium using liquid gallium. Gallium was deposited on aluminium samples at ~ 50 °C using a liquid gallium “polishing” technique. Brazing was undertaken for 30 min at 500 °C in air. EDS (Energy Dispersive X-ray Spectroscopy) and AES (Auger Electron Spectroscopy) characterisation of Ga-coated samples has shown that the Ga surface layer thickness is of ten (or a few tens of) nanometres. Furthermore, aluminium oxide layer (Al2O3) was shown to be “descaled” during Ga deposition, which ensures good conditions for further brazing. Cross-section examination of Ga-coated samples shows that liquid gallium penetrates into the aluminium grain boundaries during deposition. The thickness of the grain boundary gallium film was measured using an original EDS technique and is found to be of a few tens of nanometres. The depth of gallium grain boundary penetration is about 300 μm at the deposition temperature. The fracture stress of the brazed joints was measured from tensile tests and was determined to be 33 MPa. Cross-section examination of brazed joints shows that gallium has fully dissolved into the bulk and that the joint is really autogenous.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Flux-free diffusion brazing of aluminium-based materials using gallium (patent application: UK 0128623.6)10.4028/www.scientific.net/MSF.396-402.1579 ↗
2. New method for flux free diffusion brazing of aluminium alloys using liquid gallium (UK patent application 0128623.6)10.1179/136217103225010871 ↗
3. Basic expressions of PAP computation for quantitative EPMA
4. Quantitative analysis of homogeneous or stratified microvolumes applying the model “PAP”
5. Determination by X-ray microprobe of thickness and composition of thin surface layers
6. Surface film X-ray microanalysis10.1002/sca.4950120407 ↗
7. Electron probe X-ray microanalysis applied to thin surface films and stratified specimens
8. X-ray microanalysis of stratified specimens10.1016/0003-2670(93)85212-3 ↗
9. Dieter · 1988
10. Surface pretreatments of aluminum alloy AA2024-T3 and formation of chromate conversion coatings I. composition and electrochemical behavior of the oxide film10.1149/1.1804811 ↗
11. The system alumina–gallia–water10.1111/j.1151-2916.1952.tb13087.x ↗
12. Impurity diffusion in aluminum10.1103/PhysRevB.1.3264 ↗
13. Grain boundary liquid metal wetting: a synchrotron micro-radiographic investigation10.1016/S0168-583X(02)01697-X ↗
14. Nanometric intergranular liquid layer penetration in the Al/Ga system: an X-ray projection microscopy investigation10.1016/j.nimb.2005.12.061 ↗
15. In-situ TEM observation of aluminum embrittlement by liquid gallium10.1016/S1359-6462(97)00464-8 ↗
16. The kinetics of gallium penetration into aluminium grain boundaries — in-situ TEM observations and atomistic models10.1016/S1359-6454(99)00463-2 ↗
17. Ultrasonic attenuation of polycrystalline aluminum wetted with liquid gallium10.1016/j.msea.2006.03.126 ↗
18. Gallium penetration into aluminum alloys detected using laser-generated Rayleigh waves10.1016/j.msea.2006.01.154 ↗