Influence of sintering parameters on the properties of powder metallurgy Ti–3Al–2.5V alloy
Source abstract
Abstract
The processing of near net shape Ti-3Al-2.5V components using the conventional pressing and sintering route is addressed in this study. The Ti-3Al-2.5V starting powder was obtained considering both the blending elemental and the master alloy addition methods. The powders were uniaxially pressed and sintered in a high-vacuum furnace under various temperature-time combinations. The influence of the processing parameters on the relative density, microstructural features, amount of interstitials, mechanical behaviour, thermal conductivity and electrical resistivity of the sintered materials was evaluated. It was found that the relative density of the samples increases with processing temperature and time, and almost fully dense materials were obtained. The mechanical performance of the Ti&-3Al&-2.5V improves due to the reduction of the residual porosity and are, generally, of the same order of magnitude of those required for titanium biomedical products. Furthermore, the temperatures&-times selected permit to obtain thermal and electrical properties similar to the wrought alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Lütjering · 200310.1007/978-3-540-71398-2 ↗
2. Leyens · 2003
3. Boyer · 1998
4. German · 1998
5. Lowering the cost of titanium
6. Deformation behaviour of blended elemental Ti6Al4V compacts10.1007/BF02643793 ↗
7. Powder metallurgy of titanium alloys — a review
8. Powder metallurgy of titanium alloys — a review
9. Effects of sintering temperature and sintering time on mechanical and impact properties of injection moulded Ti–6Al–4V employing pre-alloyed and mixed powders
10. Properties and forming process of pre-alloyed powder metallurgy Ti6Al4V alloy
11. Diffusion during powder metallurgy synthesis of titanium alloys10.4028/www.scientific.net/DDF.277.177 ↗
12. Development of cost-effective blended elemental powder metallurgy Ti alloys
13. Blending an elemental approach to volume titanium manufacture10.1016/S0026-0657(06)70736-6 ↗
14. Influence of powder characteristics on sintering behaviour and properties of P/M Ti alloys produced from pre-alloyed powder and master alloy10.1179/003258910X12827272082623 ↗
15. A method of measuring specific resistivity and Hall Effect of discs of arbitrary shape
16. A method of measuring specific resistivity and Hall Effect on lamellae of arbitrary shape
17. Cost-effective blended elemental powder metallurgy of titanium alloys for transportation application10.4028/www.scientific.net/KEM.188.55 ↗
18. Cost effective manufacturing of titanium parts with powder metallurgy approach
19. Mechanical behaviour of pressed and sintered titanium alloys obtained from master alloy addition powders10.1016/j.jmbbm.2012.05.019 ↗
20. The effect of oxygen, nitrogen and hydrogen on iodide-refined titanium
21. Alloys of titanium with carbon, oxygen and nitrogen
22. Effects of three interstitial solutes (nitrogen, oxygen and carbon) on the mechanical properties of high-purity alpha titanium
23. The span-length and cross sectional design affect values of strength10.1016/j.dental.2004.05.009 ↗
24. The flexural properties of endodontic post materials10.1016/j.dental.2010.03.017 ↗
25. Henry · 2009