journal article·2013-02

The effect of starting grain size on the evolution of microstructure and texture in nickel during processing by cross-rolling

P.P. Bhattacharjee, M. Joshi, V.P. Chaudhary, M. Zaid

Publisher page

Abstract

Abstract Nickel sheets having starting grain sizes of 36 μm (fine grained starting material) and 800 μm (coarse grained starting material) were deformed by unidirectional and cross cold rolling routes up to 90% reduction in thickness. Unidirectional rolled sheets developed pure metal or copper type deformation texture irrespective of the starting grain size. However, significant differences could be observed in the texture of the two materials processed by cross-rolling. The most remarkable difference in the texture of the cross-rolled materials was much stronger Brass ({011} ) and rotated Brass ({011} 7 4 _ 4 > ) components in the fine grained starting material as compared to the coarse grained starting material. The observed differences in texture during processing by the cross-rolling route might be attributed to the different grain subdivision behavior in coarse grained starting material due to large starting grain size which correlated well with the very diffuse and fragmented microstructure developed in this material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Overview no. 76. Mechanism of deformation and development of rolling textures in polycrystalline f.c.c. metals—I. Description of rolling texture development in homogeneous CuZn alloys10.1016/0001-6160(88)90172-1 ↗
2. Overview No. 76. Mechanism of deformation and development of rolling textures in polycrystalline f.c.c. Metals—III. The influence of slip inhomogeneities and twinning10.1016/0001-6160(88)90174-5 ↗
3. The brass-type texture and its deviation from the copper-type texture10.1016/j.pmatsci.2008.09.002 ↗
4. Beck · Trans AIME · 1952 · 194 · 83
5. Deformation and recrystallization textures in cross-rolled sheets of copper and α-brass10.1016/S0036-9748(88)80252-7 ↗
6. Effect of modes of rolling on evolution of the texture in pure copper and some copper-base alloys. Part I: rolling texture10.3139/146.020918 ↗
7. Role of strain path change in texture development10.1016/S0921-5093(03)00149-7 ↗
8. Deformation and recrystallization textures in cross-rolled copper sheet10.1115/1.1419017 ↗
9. Effect of strain path change on the evolution of texture and microstructure during rolling of copper and nickel10.1016/j.msea.2011.06.062 ↗
10. Simulation of the deformation textures induced by deep drawing in extra low carbon steel sheets10.1016/0956-7151(94)90188-0 ↗
11. Development of ferrite rolling textures in low-carbon and extra low-carbon steels10.1007/BF02647219 ↗
12. Deformation banding and copper-type rolling textures10.1016/0956-7151(93)90138-I ↗
13. A theory of deformation banding in cold rolling10.1016/0956-7151(93)90308-F ↗
14. Effect of initial grain size on the evolution of {001}〈100〉 texture in severely deformed and annealed high-purity nickel10.1007/s11661-011-0674-3 ↗
15. Recrystallization in cold-rolled pure Ni10.1016/0001-6160(88)90016-8 ↗
16. Recrystallisation mechanisms and the origin of cube texture in copper10.1016/0001-6160(82)90033-5 ↗
17. Current issues in recrystallization: a review10.1016/S0921-5093(97)00424-3 ↗
18. Randomization of the annealing texture in aluminum 5182 sheet by cross-rolling10.1016/S0921-5093(01)01207-2 ↗