journal article·2015-10

Kinetics and microstructural evolution during recrystallization of a single crystal superalloy

Longchao Zhuo, Shuhua Liang, Feng Wang, Tao Xu, Yanlin Wang, Zhangxiao Yuan, Jichun Xiong, Jiarong Li, Jing Zhu

Publisher page

Abstract

Abstract The kinetical recrystallization behaviors over wide ranges of annealing temperature of 1100–1200 °C and annealing time range of 0.5–16 h of a second-generation single-crystal superalloy have been investigated by combined model simulation, TEM and EBSD techniques. The kinetics represented by Johnson–Mehl–Avrami and Arrhenius equations revealed its complicated diffusion-controlled mechanism. With increasing annealing temperature and time, the recrystallized grain size exhibited a steady increasing tendency, and gradually, the subgrain boundaries in the original matrix were consumed and replaced by high angle grain boundaries, leading to improved Schmid factor. The dominant fraction of twins in the resultant microstructure indicated its significant role in strain energy dissipation, facilitating the complete progress of recrystallization.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Reed · 2006
2. Development of processing maps for a Ni-based superalloy10.1016/j.matchar.2006.09.004 ↗
3. Solidification behavior of a Ni-based single crystal CMSX-4 superalloy solidified by downward directional solidification process10.1016/j.matchar.2015.01.003 ↗
4. Effects of processing parameters on crystal growth and microstructure formation in laser powder deposition of single-crystal superalloy10.1016/j.jmatprotec.2014.08.025 ↗
5. Effect of heat treatment atmosphere on surface recrystallization of a directionally solidified Ni-base superalloy10.1016/j.scriptamat.2008.06.032 ↗
6. Effects of carburization on recrystallization behavior of a single crystal superalloy10.1016/j.matchar.2010.04.007 ↗
7. Influence of surface recrystallization on the high temperature properties of a directionally solidified Ni-base superalloy10.1007/s11661-007-9387-z ↗
8. Effects of elemental vaporization and condensation during heat treatment of single crystal superalloys10.1016/j.scriptamat.2014.01.031 ↗
9. Kinetics of cellular discontinuous precipitation in a Re-containing single crystal superalloy10.1016/j.matlet.2014.10.075 ↗
10. A Low-cost Second Generation Single Crystal Superalloy DD6, Superalloys 2000
11. Christian · 1965
12. Diffusion in migrating interfaces10.1016/0001-6160(78)90095-0 ↗
13. Recrystallization of a nickel-base superalloy: kinetics and microstructural development10.1016/0025-5416(83)90089-7 ↗
14. Allnatt · 1993
15. Surface recrystallization and twin formation in a single crystal superalloy10.4028/www.scientific.net/MSF.706-709.2490 ↗
16. Sub-solvus cellular recrystallization and P phase formation in a single-crystal superalloy containing Re10.1007/s40195-014-0169-5 ↗
17. Formation of annealing twins in Fcc crystals10.1016/S1359-6454(96)00336-9 ↗
18. Dynamic recrystallization behavior of a γ′-hardened nickel-based superalloy during hot deformation10.1016/0001-6160(84)90015-4 ↗
19. Effects of cross-rolling on residual stress, texture and plastic anisotropy in F.C.C. and B.C.C. metals10.1016/j.matchar.2013.01.005 ↗
20. An EBSD investigation of cryogenically-rolled Cu–30%Zn Brass10.1016/j.matchar.2015.02.004 ↗
21. In-situ SEM studies of the low cycle fatigue behavior of DZ4 superalloy at elevated temperature: effect of partial recrystallization10.1016/j.ijfatigue.2013.11.001 ↗