journal article·2013-04

Microstructural stability of Sn–1Ag–0.5Cu–xAl (x=1, 1.5, and 2wt.%) solder alloys and the effects of high-temperature aging on their mechanical properties

Mohd Faizul Mohd Sabri, Dhafer Abdulameer Shnawah, Irfan Anjum Badruddin, Suhana Binti Mohd Said, Fa Xing Che, Tadashi Ariga

Publisher page

Abstract

Abstract The effects of Al addition on the microstructural stability and mechanical properties of Sn–1Ag–0.5Cu (wt.%) solder alloy under high-temperature aging were investigated. The addition of Al refines the primary β-Sn dendrites and enlarges the interdendritic regions. The addition of Al also suppresses the formation of Ag 3 Sn and Cu 6 Sn 5 intermetallic compounds and leads to the formation of Ag 3 Al and Al 2 Cu intermetallic compounds. Moreover, the addition of Al leads to the segregation of an Al-rich phase. Tensile test results indicated that the addition of Al significantly increased the yield strength and ultimate tensile strength, whereas the elastic modulus increased only slightly and the total elongation decreased. Similar to the Sn–1Ag–0.5Cu solder alloy, the microstructures of Al-modified Sn–1Ag–0.5Cu solder alloys become notably coarsened after aging, which in turn significantly degrades their mechanical properties. Fracture surface analysis indicated that the addition of Al to the Sn–1Ag–0.5Cu solder alloy leads to a brittle fracture instead of a ductile fracture.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloy Microstructure Properties · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. Reliability of lead-free interconnections under consecutive thermal and mechanical loading10.1007/BF02692443 ↗
2. Drop impact reliability testing for lead-free and lead-based soldered IC packages10.1016/j.microrel.2005.10.011 ↗
3. Phase analysis in the solder joint of Sn–Cu solder/IMCs/Cu substrate10.1016/S1044-5803(98)00059-X ↗
4. Reliability study of board-level lead-free interconnections under sequential thermal cycling and drop impact10.1016/j.microrel.2009.02.024 ↗
5. Evaluation of solder joint reliability in flip-chip packages during accelerated testing10.1007/s11664-005-0164-8 ↗
6. Design for enhanced solder joint reliability of integrated passives device under board level drop test and thermal cycling test
7. Reliability of soldered joints in CSPs of various designs and mounting conditions10.1109/6144.926396 ↗
8. The bulk alloy microstructure and mechanical properties of Sn–1Ag–0.5Cu–xAl solders (x 5 0, 0.1 and 0.2wt. %)10.1007/s10854-012-0692-y ↗
9. Effect of thermal aging on drop performance of chip scale packages with SnAgCu solder joints on Cu pads10.1007/s11664-007-0260-z ↗
10. Advances in the drop-impact reliability of solder joints for mobile applications10.1016/j.microrel.2008.12.001 ↗
11. Experimental studies of board-level reliability of chip-scale packages subjected to JEDEC drop test condition10.1016/j.microrel.2005.07.005 ↗
12. Effect of the drop impact on BGAKSP package reliability10.1016/S0026-2714(01)00230-X ↗
13. Modeling technique for reliability assessment of portable electronic product subjected to drop impact loads
14. A review on thermal cycling and drop impact reliability of SAC solder joint in portable electronic products10.1016/j.microrel.2011.07.093 ↗
15. A review on effect of minor alloying elements on thermal cycling and drop impact reliability of low-Ag Sn–Ag–Cu solder joints10.1108/13565361211219202 ↗
16. Solder joint behavior of area array packages in board level drop for handheld devices
17. Modal analysis and dynamic responses of board level drop test
18. The effect of strain rate and temperature on the tensile properties of Sn–3.5Ag solder10.1016/j.matchar.2004.11.013 ↗
19. Mechanical properties of Sn–Zn lead-free solder alloys based on the microstructure array10.1016/j.matchar.2009.11.012 ↗
20. Effect of solidification parameters on the microstructure of Sn–3.7Ag–0.9Zn solder10.1016/j.matchar.2010.08.007 ↗
21. Alloying effects in near-eutectic Sn–Ag–Cu solder alloys for improved microstructural stability10.1007/s11664-001-0129-5 ↗
22. Effect of silver content on thermal fatigue life of Sn–xAg–0.5Cu flip-chip interconnects10.1007/s11664-003-0125-z ↗
23. Melting and solidification properties of the nanoparticles of Sn3.0Ag0.5Cu lead-free solder alloy10.1016/j.matchar.2010.02.004 ↗
24. Improvement of thermal fatigue properties of Sn–Ag–Cu lead-free solder interconnects on casio's wafer-level packages based on morphology and grain boundary character10.1007/s11664-008-0560-y ↗
25. Impact of thermal cycling on Sn–Ag–Cu solder joints and board-level drop reliability10.1007/s11664-008-0400-0 ↗
26. Predicting the drop performance of solder joints by evaluating the elastic strain energy from high-speed ball pull tests10.1007/s11664-008-0633-y ↗
27. The effects of additives to SnAgCu, alloys on microstructure and drop impact reliability of solder joints10.1007/s11837-007-0085-5 ↗
28. A compliant and creep resistant SAC–Al(Ni) alloy
29. Drop test reliability improvement of lead-free fine pitch BGA using different solder ball composition
30. Improvement of mechanical impact resistance of BGA packages with Pb-free solder bumps
31. Evaluation of high compliant low Ag solder alloys on OSP as a drop solution for the 2nd level Pb-free interconnection
32. Effects of Ag content on fracture resistance of Sn–Ag–Cu lead-free solders under high strain rate conditions10.1016/j.msea.2007.01.145 ↗
33. Effect of SAC alloy composition on drop and temp cycle reliability of BGA with NiAu pad finish
34. Effect of silver content on the shear fatigue properties of Sn–Ag–Cu flip-chip interconnect10.1007/s11664-004-0138-2 ↗
35. The bulk alloy microstructure and tensile properties of Sn–1Ag–0.5Cu–xAl lead-free solder alloys (x=0, 1, 1.5 and 2wt.%)10.1108/13565361211237716 ↗
36. Improvement on thermal fatigue properties of Sn–1.2Ag–0.5Cu flip chip interconnects by nickel addition10.2320/matertrans.45.673 ↗
37. High-reliability low-Ag-content Sn–Ag–Cu solder joints for electronics applications10.1007/s11664-012-2145-z ↗
38. Reliability of Pb-free solder alloys in demanding BGA and CSP applications
39. Alloying modification of Sn–Ag–Cu solders by manganese and titanium10.1016/j.microrel.2008.10.001 ↗
40. Microstructure, mechanical, and thermal properties of the Sn–1Ag–0.5Cu solder alloy bearing Fe for electronics applications10.1016/j.msea.2012.04.115 ↗
41. Novel Fe-containing Sn–1Ag–0.5Cu lead-free solder alloy with further enhanced elastic compliance and plastic energy dissipation ability for mobile products10.1016/j.microrel.2012.03.028 ↗
42. Microstructure and tensile properties of Sn–1Ag–0.5Cu solder alloy bearing Al for electronics applications10.1007/s11664-012-2135-1 ↗
43. Reduction of lead free solder aging effects using doped SAC alloys
44. A review of mechanical properties of lead-free solders for electronic packaging10.1007/s10853-008-3125-9 ↗
45. Improvement of wettability and drop impact reliability by Al addition in SnAgCu solder
46. Development of micro-structured Sn–2Ag–0.1Al solder with highly thermal fatigue durability
47. Effects of Al on the failure mechanism of the Sn–Ag–Zn eutectic solder10.1016/j.microrel.2010.04.023 ↗
48. Aging and creep behavior of Sn3.9Ag0.6Cu solder alloy
49. Aging effects on microstructure and tensile property of Sn3.9Ag0.6Cu solder alloy10.1115/1.1756144 ↗
50. Mechanisms of fatigue crack propagation in metals, ceramics and composites: role of crack tip shielding10.1016/0025-5416(88)90547-2 ↗
51. Young's modulus of (Cu, Ag)–Sn intermetallics measured by nanoindentation10.1016/j.msea.2003.08.032 ↗
52. Study of structural changes and properties of some Sn–Ag lead-free solder alloys
53. Effect of thermal cycles on the mechanical strength of quad flat pack leads/Sn–3.5Ag–X (X=Bi and Cu) solder joints10.1007/s11664-999-0166-z ↗
54. Failure mechanism of lead-free solder joints in flip chip packages10.1007/s11664-002-0018-6 ↗
55. Hanson · 1985 · 1
56. Hanson · 1985 · 84
57. Hanson · 1985 · 135
58. Dieter · 1976
59. Microstructural changes of lead-free solder joints during long-term ageing, thermal cycling and vibration fatigue10.1108/09540910810861440 ↗
60. Microstructural development of Sn–Ag–Cu solder joints10.1007/s11664-005-0224-0 ↗
61. The evolution of microstructure and microhardness of Sn–Ag and Sn–Cu solders during high temperature aging10.1016/j.microrel.2008.11.014 ↗
62. Holmes · 2000 · 315
63. Mechanical and microstructural properties of SnAgCu solder joints10.1016/j.msea.2006.01.065 ↗