Evolution of the microstructure and phase composition of a subsurface of cast HP-type alloy during a long-term high-temperature aging
Source abstract
Abstract
Abstract The mechanism and kinetics of changes in the microstructure and phase composition of the surface diffusion area of the as-cast heat-resistant HP40NbTi alloy during prolonged, high-temperature aging in an oxidising environment are studied by optical microscopy, electron microscopy, electron microprobe analysis, and X-ray mapping. The transformation process of each phase of the alloy is unique, where these phases differ in their structure, chemical composition, and nature of the reaction with oxygen. When the alloy is oxidised, the chemical composition of the phases changes continuously according to complex laws, depending on the environment, temperature, and duration of exposure. An intensive exchange of chemical elements occurs between different phases. After long-term, high-temperature operation of the alloy, the process of oxidation of the phases probably attains a steady limiting state.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Materials for reformer furnace tubes. History of evolution
2. Effect of materials selection and design on the performance of an engineering product – an example from petrochemical industry10.1016/j.matdes.2005.07.003 ↗
3. Wrought and cast heat-resistant stainless steels and nickel alloys for the refining and petrochemical industries
4. Structure and phase stability in cast modified-HP austenite after long-term ageing10.1016/S1359-6462(03)00238-0 ↗
5. Special features of structure and long-term strength of cast refractory alloy 45Kh26N33S2B210.1007/s11041-013-9607-7 ↗
6. Effects of working temperature and carbon diffusion on the microstructure of high pressure heat-resistant stainless steel tubes used in pyrolysis furnaces during service condition10.1016/j.matdes.2011.07.069 ↗
7. Transformation of the structure of refractory alloy 0.45C-26Cr-33Ni-2Si-2Nb during a long-term high-temperature hold10.1007/s11041-014-9664-6 ↗
8. Typical failures in pyrolysis coils for ethylene cracking10.1002/maco.200303731 ↗
9. Microstructure and carburization detection in HP alloy pyrolysis tubes10.1007/s13632-015-0210-8 ↗
10. Damage characterization in two reformer heater tubes after nearly 10 years of service at different operative and maintenance conditions10.1016/j.engfailanal.2010.06.003 ↗
11. High temperature corrosion and microstructure deterioration of KHR35H radiant tubes in continuous annealing furnace10.1016/j.engfailanal.2011.11.016 ↗
12. Microstructure of HK40 alloy after high-temperature service in oxidizing/carburizing environment: I. Oxidation phenomena and propagation of a crack10.1016/S1044-5803(02)00249-8 ↗
13. Microstructure of HK40 alloy after high-temperature service in oxidizing/carburizing environment: II. Carburization and carbide transformations10.1016/S1044-5803(02)00284-X ↗
14. Microstructural characterization of modified 25Cr-35Ni centrifugally cast steel furnace tubes10.1016/S1044-5803(03)00013-5 ↗
15. Effect of tungsten on the microstructure evolution and mechanical properties of yttrium modified HP40Nb alloy10.1016/j.msea.2011.09.044 ↗
16. Microstructural changes caused by yttrium addition to NbTi-modified centrifugally cast HP-type stainless steels10.1016/j.matchar.2006.04.007 ↗
17. Mechanisms and kinetics of phase transformations in refractory alloy 45Kh26N33S2B2 in long-term high-temperature holds. Part 110.1007/s11041-014-9692-2 ↗
18. Mechanism and kinetics of phase transformations in refractory alloy 45Kh26N33S2B2 under long-term high-temperature holds. Part 210.1007/s11041-014-9717-x ↗
19. Microstructural and fractographic investigation of a centrifugally cast 20Cr32Ni + Nb alloy tube in the‘as cast’ and aged states10.1016/j.jmrt.2013.02.006 ↗
20. Crystallography and morphology of niobium carbide in as-cast HP-niobium reformer tubes10.1007/s11661-011-1025-0 ↗
21. Crystallography and morphology of MC carbides in niobium-titanium modified as-cast HP alloys10.1007/s11661-014-2285-2 ↗
22. Effect of electron factor (number of electron holes) on kinetics of nucleation, growth, and dissolution of phases during long-term high-temperature holdings of 0.45C-26Cr-33Ni-2Si-2Nb superalloy10.1134/S0031918X13100104 ↗
23. Precipitates in creep resistant austenitic stainless steels10.1179/026708301101508972 ↗
24. Precipitation kinetics in austenitic 18Cr-30Ni-Nb cast steel
25. Metallography and microstructures of heat-resistant alloys
26. Effects of Si content on the microstructure of modified-HP austenitic steels10.1016/1044-5803(93)90071-3 ↗
27. Selective high-temperature oxidation of phases in a cast refractory alloy of the 25Cr-35Ni-Si-Nb-C system10.1007/s11041-014-9770-5 ↗
28. Nanostructure mechanism of formation of oxide film in heat-resistant Fe-25Cr-35Ni super alloys10.1007/s11041-015-9794-5 ↗
29. Characterization of oxide structures formed on nickel-chromium alloy during low pressure oxidation at 500–600 °С10.1007/BF00666809 ↗
30. Fragmented structure of niobium carbide particles in as-cast modified HP alloys10.1016/j.actamat.2017.01.043 ↗
31. Identification of scale formed on Cr-Ni cast steel
32. Microstructure evolution of HP40-Nb alloys during aging under air at 1000 °C10.1016/j.matchar.2009.04.007 ↗
33. Analysis of transformations of carbide phases in alloy 25Cr35Ni by the method of quantitative electron microscopy10.1007/s11041-015-9896-0 ↗
34. Confidence intervals for the coefficient of variation for the normal and log normal distributions10.1093/biomet/51.1-2.25 ↗
35. Coefficient of variation in field experiments and yardstick thereof – an empirical study
36. High-temperature oxidation characteristics of the carbides of the group VI transition metals10.1007/BF00791195 ↗
37. Sigma phase formation and embrittlement of cast Iron-chromium-nickel (Fe-Cr-Ni) alloys
38. Kinetics of the formation of intermetallic phases in HP-type heat-resistant alloys at long-term high-temperature exposure10.1007/s11661-016-3814-y ↗