Low-current resistance spot welding of pure copper using silver oxide paste
Source abstract
Abstract
Abstract Silver oxide particles were used as an insert material to reduce the current necessary for resistance spot welding of pure copper plates. To form a conduction path for successful bonding, silver-oxide particles were reduced before bonding by preheating with a reducing solvent at 120 °C for 3 min to cover the particles with silver nanoparticles. At 2200 A, bonding could be achieved with silver-oxide particles, whereas bonding was not successful in welding experiments conducted without insert materials or with fine silver particles. Bonding was accomplished through the formation of a dense sintered layer. When such silver oxide particles are used for resistance spot welding, the joining is achieved by the high sinterability of the generated silver nanoparticles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Quality estimation of resistance spot welding by using pattern recognition with neural networks10.1109/TIM.2003.822713 ↗
2. The effect of nucleus size on mechanical properties in electrical resistance spot welding of sheets used in automotive industry10.1016/j.matdes.2004.09.025 ↗
3. Weldability of thin sheet metals by small-scale resistance spot welding using high-frequency inverter and capacitor-discharge power supplies10.1007/BF02657726 ↗
4. Comparative study of small scale and large scale resistance spot welding10.1179/136217101101538875 ↗
5. Small-scale resistance spot welding of austenitic stainless steels10.1016/j.msea.2008.05.002 ↗
6. Japan Institute of Metals · 2004 · 13
7. Effect of aluminium sheet surface conditions on feasibility and quality of resistance spot welding10.1016/j.jmatprotec.2010.02.019 ↗
8. Electrode sticking during micro-resistance welding of thin metal sheets10.1109/TEPM.2002.807732 ↗
9. Weldability of thin sheet metals during small-scale resistance spot welding using an alternating-current power supply10.1007/s11664-004-0270-z ↗
10. Synthesis of metallic copper nanoparticles using copper oxide nanoparticles as precursor and their metal–metal bonding properties10.1179/1362171812Y.0000000047 ↗
11. Silver nanoparticle paste for low-temperature bonding of copper10.1007/s11664-011-1594-0 ↗
12. Low-temperature sintered nanoscale silver as a novel semiconductor device-metallized substrate interconnect material10.1109/TCAPT.2005.853167 ↗
13. Low-temperature sintering with nano-silver paste in die-attached interconnection10.1007/s11664-007-0230-5 ↗
14. Mechanical properties of nano-silver joints as die attach materials10.1016/j.jallcom.2011.10.092 ↗
15. Electron-diffraction study of liquid–solid transition of thin metal films10.1143/JPSJ.9.359 ↗
16. Metal–metal bonding process using Ag metallo-organic nanoparticles10.1016/j.actamat.2005.01.047 ↗
17. Ide · Mater. Trans. · 2006 · 47 · 21110.2320/matertrans.47.211 ↗
18. Interfacial bonding mechanism using silver metallo-organic nanoparticles to bulk metals and observation of sintering behavior10.2320/matertrans.MF200805 ↗
19. Study on bonding technology using silver nanoparticles10.1143/JJAP.47.6615 ↗
20. Bonding technique using micro-scaled silver-oxide particles for in-situ formation of silver nanoparticles10.2320/matertrans.MRA2008269 ↗
21. Rapid sintering nanosilver joint by pulse current for power electronics packaging10.1109/TDMR.2012.2237552 ↗
22. A novel metal-to-metal bonding process through in-situ formation of Ag nanoparticles using Ag2O microparticles10.1088/1742-6596/165/1/012074 ↗
23. Direct bonding to aluminum with silver-oxide microparticles10.2320/matertrans.MRP2008277 ↗
24. Bonding technique using micro-scaled silver-oxide particles10.5104/jiep.12.110 ↗
25. Effects of Au and Pd additions on joint strength, electrical resistivity and ion-migration tolerance in low-temperature sintering bonding using Ag2O paste10.1007/s11664-012-2167-6 ↗
26. Effect of polyethylene glycols with different polymer chain lengths on the bonding process involving in situ formation of silver nanoparticles from Ag2O10.2320/matertrans.MD201201 ↗
27. Bondability of copper joints formed using a mixed paste of Ag2O and CuO for low-temperature sinter bonding10.2320/matertrans.MD201202 ↗
28. Effect of solvents in the polyethylene glycol series on the bonding of copper joints using Ag2O paste10.1007/s11664-012-2354-5 ↗
29. Reflectometry studies of the oxidation kinetics of thin copper films10.1002/sia.1421 ↗