journal article·2019-07

Thermal stability analysis of a lightweight Al-Zn-Mg-Cu alloy by TEM and tensile tests

Pan Dai, Xian Luo, Yanqing Yang, Zongde Kou, Bin Huang, Jinxin Zang, Jigang Ru

Publisher page

Abstract

Abstract Long-term thermal stability plays an important role in practical applications of Al-Zn-Mg-Cu alloys. In the present work, thermal stability of the T7452-treated 7085 Al alloy was assessed at temperatures of 100, 125, 150 and 175 °C for 100, 500 and 1000 h, through hardness, electrical conductivity and tensile tests after thermal exposure. The nanoscale precipitates under different thermal exposure conditions were also qualitatively studied by transmission electron microscopy (TEM). The results show that thermal stability of the alloy is more sensitive to thermal exposure temperature than to exposure time. The hardness increases first and then decreases with the increase of exposure temperature while it decreases gradually as exposure time prolongs. However, the variation of electrical conductivity is opposite. The tensile strength, yield strength and hardness after 100 °C/100 h thermal exposure increased by 2.4%, 6.7% and 9.2% than those of the alloy without thermal exposure, respectively. The precipitate sequence during thermal exposure is coincident with that of aging. In addition, as thermal exposure deepens, the average radius of precipitates increases while the volume fraction decreases. Meanwhile, the grain boundary precipitates coarsen and transform from continuous to discrete. The influence of precipitates on properties of the alloy is discussed quantitatively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Effect of heat treatment on hot deformation behavior and microstructure evolution of 7085 aluminum alloy10.1016/j.jallcom.2012.05.052 ↗
2. Effect of quench-induced precipitation on microstructure and mechanical properties of 7085 aluminum alloy10.1016/j.matdes.2017.06.054 ↗
3. Effect of compositions on the quenching sensitivity of 7050 and 7085 alloys10.1016/j.msea.2016.04.095 ↗
4. Effect of Zener-Hollomon parameter on quench sensitivity of 7085 aluminum alloy10.1016/j.jallcom.2016.07.089 ↗
5. Effect of homogenization time on quench sensitivity of 7085 aluminum alloy10.1016/S1003-6326(14)63344-6 ↗
6. Investigation of quench sensitivity of high strength Al-Zn-Mg-Cu alloys by time-temperature-properties diagrams10.1016/j.matdes.2009.12.038 ↗
7. Comparative study on local and global mechanical properties of bobbin tool and conventional friction stir welded 7085-T7452 aluminum thick plate10.1016/j.jmst.2017.05.015 ↗
8. Microstructure evolution in the conventional single side and bobbin tool friction stir welding of thick rolled 7085-T7452 aluminum alloy10.1016/j.matchar.2018.01.051 ↗
9. Influence of retrogression and re-aging treatment on corrosion behaviour of an Al-Zn-Mg-Cu alloy10.1016/j.matdes.2010.11.036 ↗
10. The effect of thermal exposure on the mechanical properties of 2099-T6 die forgings, 2099-T83 extrusions, 7075-T7651 plate, 7085-T7452 die forgings, 7085-T7651 plate, and 2397-T87 plate aluminum alloys10.1361/105994906X136142 ↗
11. The effects of prolonged thermal exposure on the mechanical properties and fracture toughness of C458 aluminum-lithium alloy10.1016/j.engfailanal.2004.10.008 ↗
12. The effect of thermal exposure on the electrical conductivity and static mechanical behavior of several age hardenable aluminum alloys10.1016/j.engfailanal.2006.12.008 ↗
13. Optimization of electrical conductivity and strength combination by structure design at the nanoscale in Al-Mg-Si alloys10.1016/j.actamat.2015.07.039 ↗
14. Influence of Fe, Si and homogenization on electrical conductivity and mechanical properties of ductile Al-Mg-Si alloy10.1016/j.jallcom.2016.01.110 ↗
15. Effects of high magnetic field on the evolutions of constituent phases in 7085 aluminum alloy during homogenization10.1016/j.matchar.2012.05.014 ↗
16. Effect of heat treatment on strength, exfoliation corrosion and electrochemical behavior of 7085 aluminum alloy10.1016/j.matdes.2011.09.033 ↗
17. Nano-scale precipitate evolution and mechanical properties of 7085 aluminum alloy during thermal exposure10.1016/j.msea.2018.05.092 ↗
18. Characterisation of the composition and volume fraction of η′ and η precipitates in an Al–Zn–Mg alloy by a combination of atom probe, small-angle X-ray scattering and transmission electron microscopy10.1016/j.actamat.2005.03.004 ↗
19. Grain boundary precipitation in aluminum alloys: effect of boundary structure10.1007/BF02648516 ↗
20. Heating aging behavior of Al-8.35Zn-2.5Mg-2.25Cu alloy10.1016/j.matdes.2014.03.060 ↗
21. Investigation of precipitation in an Al-Zn-Mg alloy after two-step ageing treatment at 100 °C and 150 °C10.1016/S0921-5093(99)00231-2 ↗
22. Investigation of fine scale precipitates in Al-Zn-Mg alloys after various heat treatments10.1016/S0921-5093(01)01876-7 ↗
23. GP-zones in Al-Zn-Mg-Cu alloys and their role in artificial aging10.1016/S1359-6454(01)00251-8 ↗
24. HREM study and structure modeling of the η′ phase, the hardening precipitates in commercial Al-Zn-Mg-alloys10.1016/S1359-6454(99)00138-X ↗
25. Precipitation behaviour of Al-Zn-Mg-Cu alloy and diffraction analysis from η′ precipitates in four variants10.1016/j.jallcom.2014.05.061 ↗
26. Precipitation phenomena in an ultrafine-grained Al alloy10.1016/j.actamat.2012.12.037 ↗
27. Over-aging influenced matrix precipitate characteristics improve fatigue crack propagation in a high Zn-containing Al-Zn-Mg-Cu alloy10.1016/j.msea.2018.01.040 ↗
28. Evaluation of strain fields caused by the η′ phase in an Al-Zn-Mg-Cu alloy10.1016/j.msea.2016.10.065 ↗
29. Aging behavior and precipitate characterization of a high Zn-containing Al-Zn-Mg-Cu alloy with various tempers10.1016/j.matdes.2016.03.150 ↗
30. Size effects in materials due to microstructural and dimensional constraints: a comparative review10.1016/S1359-6454(98)00231-6 ↗
31. A process model for age hardening of aluminum alloys—I. The model10.1016/0956-7151(90)90291-N ↗
32. Effect of predeformation and preaging at room temperature in Al-Zn-Mg-(Cu, Zr) alloys10.1016/S0921-5093(00)01883-9 ↗
33. Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy10.1016/j.actamat.2013.09.042 ↗
34. Early-stage precipitation in Al-Zn-Mg-Cu alloy10.1016/j.actamat.2004.06.025 ↗
35. Structure analysis of embedded nano-sized particles by precession electron diffraction. η′-Precipitates in an Al-Zn-Mg alloy as example10.1016/j.ultramic.2006.01.009 ↗
36. Fine precipitation scenarios of AlZnMg(Cu) alloys revealed by advanced atomic-resolution electron microscopy study part II: fine precipitation scenarios in AlZnMg(Cu) alloys10.1016/j.matchar.2014.11.027 ↗
37. Characterization and modeling of precipitation kinetics in an Al-Zn-Mg alloy10.1016/S0921-5093(00)01247-8 ↗
38. Influence of predeformation and ageing of an Al-Zn-Mg-Cu alloy-II. Modeling of precipitation kinetics and yield stress10.1016/S1359-6454(98)00296-1 ↗
39. The effect of precipitation on the Portevin-Le Chatelier effect in an Al-Zn-Mg-Cu alloy10.1016/S0921-5093(99)00029-5 ↗
40. A nanostructural design to produce high-strength Al alloys with enhanced electrical conductivity10.1016/j.scriptamat.2013.12.002 ↗
41. Rositter · 2003