The grain growth and boundary evolution of extra-coarse-grained cemented carbides by pressureless sintering of ball-milling-mixed WC with Co at different temperature
Source abstract
Abstract
Abstract Recently, the fabrication of the extra-coarse-grained WC-Co cemented carbide has aroused wide interests for useful applications as mining bits or shield cutting tools. In this study, extra-coarse-grained WC-10Co cemented carbides were sintered using ball-milling-mixed composite powders, and the inner relationship of mechanical properties with microstructural evolution was investigated systematically. The average particle size of mixed WC-10Co powders decreased rapidly from about 20 μm to 2 μm by extending milling time from 3 h to 12 h, and then kept stable at about 1 μm with increasing ball milling time further. After sintering of the mildly ball-milled WC-10Co composite powders at 1350 °C, the average grain size of WC (dWC) was measured to be located at about 6.3 μm. With increasing sintering temperature to 1450 °C, the dWC increased to about 7.3 μm, where transverse rupture strength (TRS) and impact toughness were both enhanced due to the increased density. On the other hand, the coarse grain growth may enhance the grain and boundary strength through precipitation of fine grains and substantial low energy boundaries, although WC contiguity is increased. Here, fracture features of cemented carbide through a tortuous path by cobalt deformation and obstruction of coarse grain contribute to the higher destructive resistance. However, with increasing temperature to 1475 °C, the increase of WC aggregation structure, WC grain boundaries with decreased low energy boundaries and locked micro-pores may contribute to deteriorative mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Orthopaedic implants and arthroplasty · Tunneling and Rock Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. A review of cemented carbides for rock drilling: an old but still tough challenge in geo-engineering10.1016/j.ijrmhm.2013.01.003 ↗
2. Novel ultra-coarse hardmetal grades with reinforced binder for mining and construction10.1016/j.ijrmhm.2005.03.007 ↗
3. Effects of WC particle size on sintering behavior and mechanical properties of coarse grained WC–8Co cemented carbides fabricated by unmilled composite powders10.1016/j.ceramint.2015.07.086 ↗
4. Mechanisms of WC plastic deformation in cemented carbide10.1016/j.matdes.2018.04.025 ↗
5. Particle properties of submicron-sized WC–12Co processed by planetary ball milling10.1016/j.ijrmhm.2013.09.006 ↗
6. Preparation and sintering of WC–Co composite powders for coarse grained WC–8Co hardmetals10.1016/j.ijrmhm.2014.04.004 ↗
7. Investigation on morphology evolution of coarse grained WC–6Co cemented carbides fabricated by ball milling route and hydrogen reduction route10.1016/j.ijrmhm.2016.01.001 ↗
8. Influences of the preparation methods of WC–Co powders on the sintering and microstructure of coarse grained WC–8Co hardmetals10.1016/j.ijrmhm.2014.10.012 ↗
9. Effect of cobalt content on the microstructure and mechanical properties of coarse grained WC-co cemented carbides fabricated from chemically coated composite powder10.1016/j.jallcom.2018.06.366 ↗
10. Effects of ultrafine WC on the densification behavior and microstructural evolution of coarse-grained WC-5Co cemented carbides10.1016/j.ceramint.2020.01.113 ↗
11. Influence of sintering temperature on microstructure and mechanical properties of WC-8Ni cemented carbide produced by vacuum sintering10.1016/j.ceramint.2016.06.134 ↗
12. Synthesis, sintering, and mechanical properties of nanocrystalline cemented tungsten carbide – a review10.1016/j.ijrmhm.2008.07.011 ↗
13. Grain growth during sintering of tungsten carbide ceramics10.1016/j.ijrmhm.2014.01.001 ↗
14. Carbide grain growth in cemented carbides10.1016/j.actamat.2010.11.056 ↗
15. Sintering shrinkage of WC–Co materials with bimodal grain size distributions10.1016/j.actamat.2004.12.016 ↗
16. The influence of grain growth inhibitors on the microstructure and properties of submicron, ultrafine and nano-structured hardmetals10.1016/j.ijrmhm.2018.07.003 ↗
17. A new insight into the ∑=2 grain boundary characteristics in WC powder and in WC-co sintered materials10.1016/j.actamat.2018.06.022 ↗
18. Determining crystal habits from observations of planar sections10.1111/j.1151-2916.2002.tb00531.x ↗
19. Low-energy grain boundaries in WC-Co cemented carbides10.1016/j.actamat.2019.06.015 ↗
20. The two dimensional microstructure characterization of cemented carbides with an automatic image analysis process10.1016/j.ceramint.2017.08.002 ↗
21. Implementation of an effective time-saving two-stage methodology for microstructural characterization of cemented carbides10.1016/j.ijrmhm.2015.10.006 ↗
22. Effect of jet milling on micro-strain behavior and rupture behavior of agglomerates of ultrafine WC powders10.1016/S1003-6326(19)65119-8 ↗
23. Effects of ball milling time on the synthesis and consolidation of nanostructured WC–Co composites10.1016/j.ijrmhm.2009.05.006 ↗
24. Effects of powder preparation and sintering temperature on consolidation of ultrafine WC-8Co tool material produced by spark plasma sintering10.1016/j.ceramint.2019.06.227 ↗
25. Effect of Ni content and Al2O3 particle size on the thermal and mechanical properties of Al2O3/Ni composites prepared by spark plasma sintering10.1016/j.ijrmhm.2018.05.010 ↗
26. The effects of fine WC contents and temperature on the microstructure and mechanical properties of inhomogeneous WC-(fine WC-co) cemented carbides10.1016/j.ceramint.2016.08.119 ↗
27. The effects of micron WC contents on the microstructure and mechanical properties of ultrafine WC–(micron WC–Co) cemented carbides10.1016/j.jallcom.2014.01.090 ↗
28. Effects of ultrafine WC on the densification behavior and microstructural evolution of coarse-grained WC-5Co cemented carbides10.1016/j.ceramint.2020.01.113 ↗
29. Grain growth during the early stage of sintering of nanosized WC–Co powder10.1016/j.ijrmhm.2007.04.006 ↗
30. Constitutive behaviour of WC–Co materials with different grain size sintered under load10.1016/j.actamat.2003.12.024 ↗
31. Defect structure induced by ion injection in WC–Co10.1016/j.scriptamat.2007.11.026 ↗
32. Solid-state spreading and sintering of multiphase materials10.1016/j.msea.2007.01.160 ↗
33. The dependence of the contiguity of WC on Co content and its independence from WC grain size in WC–Co alloys10.1016/j.ijrmhm.2005.04.012 ↗
34. Grain growth behaviour and mechanical properties of coarse-grained cemented carbides with bimodal grain size distributions10.1016/j.msea.2020.140586 ↗
35. Abnormal growth of faceted (WC) grains in a (co) liquid matrix10.1007/BF02652373 ↗
36. Modelling WC–Co sintering shrinkage—effect of carbide grain size and cobalt content10.1016/j.msea.2006.10.157 ↗
37. Fracture toughness of cemented carbides: testing method and microstructural effects10.1016/j.ijrmhm.2014.08.018 ↗
38. Evolution of the WC grain shape in WC–Co alloys during sintering: effect of C content10.1016/j.ijrmhm.2008.06.001 ↗
39. Orientation-dependent hardness and nanoindentation-induced deformation mechanisms of WC crystals10.1016/j.actamat.2014.09.048 ↗
40. Nanoindentation of WC–Co hardmetals10.1016/j.jeurceramsoc.2012.12.018 ↗
41. Mechanical strength assessment of single WC-WC interfaces present in WC-co hardmetals through micro-beam bending experiments10.1016/j.ijrmhm.2017.12.009 ↗
42. Correlation of transverse rupture strength of WC–Co with hardness10.1016/j.ijrmhm.2004.11.005 ↗
43. Three-point bending fatigue behavior of WC–Co cemented carbides10.1016/j.matdes.2012.08.075 ↗
44. Effect of particle size and high-energy ball milling time on microstructure and mechanical properties of WC-10Co cemented carbides with plate-like WC grains10.1088/2053-1591/ab3886 ↗
45. Fracture and fatigue of rock bit cemented carbides: mechanics and mechanisms of crack growth resistance under monotonic and cyclic loading10.1016/j.ijrmhm.2014.04.010 ↗
46. Fatigue lifetime and crack growth behavior of WC-co cemented carbide10.4028/www.scientific.net/AMR.891-892.955 ↗
47. Microstructural effects on the R-curve behavior of WC-co cemented carbides10.1016/j.matdes.2016.02.115 ↗