journal article·2020-01

Significant influence of rolling modes on martensitic transformation, microstructural evolution and texture development in a 304 stainless steel

Guosheng Sun, Linxiu Du, Jun Hu, Bin Zhang

Publisher page

Abstract

Abstract A 304 stainless steel was deformed by two different rolling modes (unidirectional cold rolling and cross rolling) at room temperature. The effects of rolling modes on martensitic transformation, microstructural evolution, and texture development were investigated. The results showed that martensitic transformation was enhanced significantly by cross rolling. The underlying reason was the increase in the amounts of nucleation sites for α′-martensite, i.e., intersections of shear bands. The transformation of austenite to martensite was found to be followed the sequence of γ → e → α′ regardless of rolling modes. Rolling modes had great influences on deformation textures in both the remaining austenite and α′-martensite. For unidirectional cold-rolled samples, the main texture components of deformed austenite were Brass ({110}〈112〉) and S ({123}〈634〉) texture, while the α′-martensite phase exhibited {112}〈110〉, {223}〈121〉, and {554}〈225〉 orientations. However, ζ-fiber (〈110〉//ND) component, which was characterized by oscillation between Brass and G/B ({110}〈111〉) texture, was formed in remaining austenite during cross rolling, accompanied by a weakening of S component. Meanwhile, the α′-martensite phase in cross-rolled samples exhibited η-fiber (〈001〉//ND), and the dominant texture components were Rotated Cube ({001}〈110〉) and {001}〈160〉. The stability of the orientations during cross rolling can be responsible for texture development in both austenite and α′-martensite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. A repetitive thermomechanical process to produce nano-crystalline in a metastable austenitic steel10.1016/j.scriptamat.2005.02.018 ↗
2. Nanograined/ultrafine-grained structure and tensile deformation behavior of shear phase reversion-induced 301 austenitic stainless steel10.1007/s11661-010-0230-6 ↗
3. Microstructure and deformation behavior of phase-reversion-induced nanograined/ultrafine-grained austenitic stainless steel10.1007/s11661-009-9920-3 ↗
4. Formation of nano/ultrafine grain structure in a 201 stainless steel through the repetitive martensite thermomechanical treatment10.1016/j.matlet.2012.08.058 ↗
5. Formation of nanocrystalline structure in 301 stainless steel produced by martensite treatment10.1007/s11661-009-9916-z ↗
6. Development of ultra fine grain structure by martensitic reversion in stainless steel10.1023/A:1015757710546 ↗
7. Challa · Scr. Mater. · 2014 · 86 · 6010.1016/j.scriptamat.2014.05.010 ↗
8. Deformation-induced martensitic transformation in a 201 austenitic steel: the synergy of stacking fault energy and chemical driving force10.1016/j.msea.2015.12.006 ↗
9. Application of martensitic transformation fundamentals to select appropriate alloys for grain refining through martensite thermomechanical treatment10.1007/s11661-013-1698-7 ↗
10. Interplay between grain structure, deformation mechanisms and austenite stability in phase-reversion-induced nanograined/ultrafine-grained austenitic ferrous alloy10.1016/j.actamat.2014.10.038 ↗
11. Effects of strain state and strain rate on deformation-induced transformation in 304 stainless steel: part I. magnetic measurements and mechanical behavior10.1007/BF02644427 ↗
12. Effects of strain state and strain rate on deformation-induced transformation in 304 stainless steel: part II. Microstructural study10.1007/BF02644428 ↗
13. Twinning and martensite in a 304 austenitic stainless steel10.1016/j.msea.2012.05.080 ↗
14. Estimation of deformation induced martensite in austenitic stainless steels10.1016/j.msea.2011.08.039 ↗
15. Maréchal · 2011
16. Deformation mechanisms in austenitic TRIP/TWIP steel as a function of temperature10.1007/s11661-014-2684-4 ↗
17. Effect of cryogenic rolling and annealing on the microstructure evolution and mechanical properties of 304 stainless steel10.1007/s12613-017-1446-x ↗
18. Investigation of cold rolling variables on the formation of strain-induced martensite in 201L stainless steel10.1016/j.matdes.2012.09.054 ↗
19. Suppressed martensitic transformation under biaxial loading in low stacking fault energy metastable austenitic steels10.1016/j.scriptamat.2017.12.026 ↗
20. Effect of strain path change on the evolution of texture and microstructure during rolling of copper and nickel10.1016/j.msea.2011.06.062 ↗
21. The effect of starting grain size on the evolution of microstructure and texture in nickel during processing by cross-rolling10.1016/j.matchar.2012.11.005 ↗
22. Texture evolution during cross rolling and annealing of high-purity nickel10.1007/s11661-013-1617-y ↗
23. Role of strain path change in texture development10.1016/S0921-5093(03)00149-7 ↗
24. Electron backscatter diffraction study of deformation and recrystallization textures of individual phases in a cross-rolled duplex steel10.1016/j.matchar.2014.08.006 ↗
25. The relationship of microstructure and texture to rolling direction in cold-rolled metastable austenitic steel10.1007/s11661-010-0467-0 ↗
26. Effect of thermo-mechanical processing on texture evolution in austenitic stainless steel 316L10.1016/j.matchar.2014.10.006 ↗
27. Martensite formation in conventional and isothermal tension of 304 austenitic stainless steel measured by X-ray diffraction10.1007/s11661-014-2422-y ↗
28. A direct method of determining preferred orientation of a flat reflection sample using a Geiger counter X-ray spectrometer10.1063/1.1698268 ↗
29. Deformation bands in high-alloy austenitic 16Cr6Mn6Ni TRIP steel: phase transformation and its consequences on strain hardening at room temperature10.1002/srin.201500005 ↗
30. On the stress dependence of partial dislocation separation and deformation microstructure in austenitic stainless steels10.1016/S1359-6454(03)00117-4 ↗
31. Design of a novel Mn-based 1GPa duplex stainless TRIP steel with 60% ductility by a reduction of austenite stability10.1016/j.actamat.2011.04.011 ↗
32. Formation of shear bands and strain-induced martensite during plastic deformation of metastable austenitic stainless steels10.1016/j.actamat.2007.07.015 ↗
33. Deformation microstructure and deformation-induced martensite in austenitic Fe-Cr-Ni alloys depending on stacking fault energy10.1007/s11661-016-3839-2 ↗
34. Accumulative roll bonding at room temperature of a Bi-metallic AA5754/AA6061 composite: impact of strain path on microstructure, texture, and mechanical properties10.1002/adem.201700285 ↗
35. On the significance of nature of strain-induced martensite on phase-reversion-induced nanograined/ultrafine-grained austenitic stainless steel10.1007/s11661-009-0072-2 ↗
36. Effect of pre-cold-working on diffusional reversion of deformation induced martensite in metastable austenitic stainless steel10.2355/isijinternational.34.522 ↗
37. Special rolling techniques for improvement of mechanical properties of ultrafine-grained metal sheets: a review10.1002/adem.201500369 ↗
38. Extreme grain refinement by severe plastic deformation: a wealth of challenging science10.1016/j.actamat.2012.10.038 ↗
39. A mechanism for the strain-induced nucleation of martensitic transformations10.1016/0022-5088(72)90173-7 ↗
40. Formation of h.c.p. and f.c.c. twins in an Fe-Mn-Cr-Si-Ni alloy10.1016/0956-7151(94)90137-6 ↗
41. On the influence of deformation mechanism during cold and warm rolling on annealing behavior of a 304 stainless steel10.1016/j.msea.2019.01.020 ↗
42. Cold rolling texture in AISI 304 stainless steel10.1016/j.msea.2003.08.012 ↗
43. Annealing behavior of a 304L stainless steel processed by large strain cold and warm rolling10.1016/j.msea.2017.02.073 ↗
44. Deformation-induced transformation textures in metastable austenitic stainless steel10.1016/j.msea.2006.05.107 ↗
45. Texture transition in austenitic stainless steels
46. Deformation and recrystallization textures in cross-rolled copper sheet10.1115/1.1419017 ↗
47. Fine grained austenitic stainless steels: the role of strain induced α′ martensite and the reversion mechanism limitations10.2355/isijinternational.49.293 ↗
48. Effect of austenite pancaking on texture formation in a plain carbon and a Nb microalloyed steel10.1016/0956-7151(94)90428-6 ↗
49. Effects of cross-rolling on residual stress, texture and plastic anisotropy in f.c.c. and b.c.c. metals10.1016/j.matchar.2013.01.005 ↗
50. Influence of cross rolling and heat treatment on texture and forming properties of molybdenum sheets10.1016/j.ijrmhm.2010.07.003 ↗