Quantitative measurement of corrosion at the nanoscale by in situ spectral modulation interferometry
Source abstract
Abstract
This research study presents a novel application of a quantitative phase microscopy technique, spectral modulation interferometry (SMI), for in situ nanoscale characterization of corrosion of an aluminum alloy in real time. SMI offers high sensitivity, rapid image acquisition, and speckle-free images; thus, real-time quantification of surface topography evolution during corrosion can be obtained accurately to evaluate the temporally- and spatially-dependent corrosion rates. With an innovative additive-manufactured fluid cell, experiments were performed in situ under flowing solution conditions. Electrochemical tests via stepwise polarization and solution chemistry through collected aliquots of outflow solution were also performed alongside the nanoscale SMI experiment to simultaneously provide a corroborating corrosion rate measurement. Based on the quantitative 3D height profiles across the corroded surface, pit formation resulting from rapid local corrosion was predominant, appearing at different times and are heterogeneously distributed across the surface. The computed time-dependent dissolution rates of aluminum also varied as the experiment proceeded, with the combination of linear and nonlinear surface normal distributions. An initial mean linear dissolution rate of [0.40 ± 0.007] μmol m −2 s −1 transitioned to a more rapid mean rate of [1.95 ± 0.035] μmol m −2 s −1, driven by the anodic polarization. Dissolution rates from the three performed methods follow similar trends and there is the visibility of linking the nanoscale in situ SMI data to the electrochemical corrosion measurements and ex situ chemical solution analysis. At the end of the corrosion period, rates of 118 μmol m −2 s −1, 71 μmol m −2 s −1, and 2.45 μmol m −2 s −1 were obtained from electrochemical measurements, ex situ solution analyses, and in situ SMI corrosion measurement, respectively. Finally, these experimental results validate the applicability of SMI for in situ nanoscale characterization of a corroding alloy surface.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thermography and Photoacoustic Techniques · Force Microscopy Techniques and Applications · Photoacoustic and Ultrasonic Imaging
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (97)
Show source-provided references
1. Reinforced concrete structures: a review of corrosion mechanisms and advances in electrical methods for corrosion monitoring
2. In situ monitoring of the localized corrosion of 304 stainless steel in FeCl3 solution using a joint electrochemical noise and scanning reference electrode technique10.1016/j.elecom.2018.03.002 ↗
3. Unmasking chloride attack on the passive film of metals
4. Determination of pitting corrosion stage of stainless steel by galvanodynamic impedance spectroscopy10.1016/j.electacta.2017.09.047 ↗
5. Corrosion behaviour of chrome–manganese austenitic stainless steels and AISI 304 stainless steel in chloride environment10.1007/s12666-013-0345-8 ↗
6. Localized corrosion of stainless steel in chloride, sulfate and thiosulfate containing environments10.1016/S0010-938X(99)00072-4 ↗
7. Anti-corrosion behaviors of corn-based polyols on low carbon steel rebar10.1016/j.clema.2022.100066 ↗
8. Stress corrosion cracking of stainless steel used in drill collars10.1016/S0921-5093(04)00869-X ↗
9. Digital holographic reconstruction detection of localized corrosion arising from scratches10.2298/JSC090627016W ↗
10. Development of an accelerated test for pitting corrosion of CUSTOM 450 by rDHM10.1515/ijmr-2020-7998 ↗
11. Koch · 2002
12. Materials: corrosion, its tradition and scope
13. Koch · 2016
14. Effect of artificial aging on intergranular corrosion of extruded AlMgSi alloy with small Cu content10.1016/j.corsci.2005.05.045 ↗
15. Altenpohl · 2017
16. Fortin · 1983
17. Thomas · 1997 · 2 · 2279
18. Study of the precipitation kinetics in a 6000 series automotive sheet material
19. Surface analysis, microstructural, mechanical and electrochemical properties of new Ti-15Ta-5Zr alloy10.1007/s12540-015-4074-x ↗
20. Experimental investigation on erosion performance and wear factors of custom 450 steel as the first row blade material of an axial compressor10.1504/IJSURFSE.2017.084663 ↗
21. Micro-stratigraphical investigation on corrosion layers in ancient bronze artefacts by scanning electron microscopy energy dispersive spectrometry and optical microscopy10.1186/2050-7445-1-21 ↗
22. Multianalytical study of corrosion layers in some archaeological copper alloy artefacts10.1002/sia.5865 ↗
23. Effect of the annealing temperature on the mechanical properties, formability and corrosion resistance of hot-rolled duplex stainless steel10.1016/j.jmatprotec.2008.04.026 ↗
24. Experimental studies of erosion and corrosion interaction in an axial compressor first stage rotating blade material10.1007/s00339-018-2007-5 ↗
25. A review—pitting corrosion initiation investigated by TEM10.1016/j.jmst.2019.01.013 ↗
26. In-situ nanoscopic observations of dealloying-driven local corrosion from surface initiation to in-depth propagation10.1016/j.corsci.2020.108912 ↗
27. Nanoscopic and in-situ cross-sectional observations of Li-based conversion coating formation using liquid-phase TEM10.1038/s41529-021-00189-y ↗
28. In situ synchrotron X-ray micro-tomography study of pitting corrosion in stainless steel10.1016/j.corsci.2011.05.040 ↗
29. An electrochemical and X-ray computed tomography investigation of the effect of temperature on CO2 corrosion of 1Cr carbon steel10.1016/j.corsci.2020.108471 ↗
30. 3D time-resolved observations of fatigue crack initiation and growth from corrosion pits in Al 7XXX alloys using in situ synchrotron X-ray tomography10.1007/s11661-019-05519-z ↗
31. Application of a quasi in situ experimental approach to estimate 3-D pitting corrosion kinetics in stainless steel10.1149/2.0381613jes ↗
32. Application of electrochemical atomic force microscopy (EC-AFM) in the corrosion study of metallic materials10.3390/ma13030668 ↗
33. Application of AFM-based techniques in studies of corrosion and corrosion inhibition of metallic alloys10.3390/cmd1030017 ↗
34. Atomic force microscopy-scanning electrochemical microscopy (AFM-SECM) for nanoscale topographical and electrochemical characterization: principles, applications and perspectives10.1016/j.electacta.2019.135472 ↗
35. AFM study of steel corrosion in aqueous solutions in concrete10.3989/mc.2010.59410 ↗
36. AFM study of the early corrosion of a high strength steel in a diluted sodium chloride solution10.1016/j.corsci.2008.03.013 ↗
37. Understanding crystallographic orientation dependent dissolution rates of 90Cu-10Ni alloy: new insights based on AFM/SKPFM measurements and coordination number/electronic structure calculations10.1016/j.corsci.2019.108320 ↗
38. Direct observation of pitting corrosion evolutions on carbon steel surfaces at the nano-to-micro- scales10.1038/s41598-018-26340-5 ↗
39. Kinetics of pipeline steel corrosion studied by Raman spectroscopy-coupled vertical scanning interferometry10.1038/s41529-018-0061-2 ↗
40. Direct observations of microstructure-resolved corrosion initiation in AA7075-T651 at the nanoscale using vertical scanning interferometry (VSI)10.1016/j.matchar.2020.110166 ↗
41. Microstructural surface characterization of stainless and plain carbon steel using digital holographic microscopy10.1364/JOSAB.34.000B36 ↗
42. Digital holographic microscopy as a new technique for quantitative measurement of microstructural corrosion in austenitic stainless steel10.1016/j.matdes.2017.03.085 ↗
43. An investigation on general corrosion and pitting of iron with the in-line digital holography10.1016/j.electacta.2007.11.040 ↗
44. In situ monitoring of pitting corrosion on stainless steel with digital holographic surface imaging10.1149/2.0061911jes ↗
45. Quantification of corrosion products formation onto a copper sample by digital holographic microscopy
46. Pitting corrosion behaviour of new corrosion-resistant reinforcement bars in chloride-containing concrete pore solution10.3390/ma10080903 ↗
47. Investigation into the anodic dissolution processes of copper in neutral and acidic sulfate solutions with the in-line digital holography10.5796/electrochemistry.84.378 ↗
48. Study of the effects of the magnetic field on the anodic dissolution of nickel with in-line digital holography10.20964/2018.01.46 ↗
49. Kim · 2011
50. Quantitative phase imaging10.1016/B978-0-44-459422-8.00003-5 ↗
51. Reactions at surfaces: a new approach integrating interferometry and kinetic simulations10.1111/j.1551-2916.2010.04141.x ↗
52. How predictable are dissolution rates of crystalline material?10.1016/j.gca.2012.09.011 ↗
53. Variability of crystal surface reactivity: what do we know?10.1016/j.apgeochem.2014.02.002 ↗
54. Beyond the conventional understanding of water-rock reactivity10.1016/j.epsl.2016.10.019 ↗
55. Temporal evolution of calcite surface dissolution kinetics10.3390/min8060256 ↗
56. Pulsating dissolution of crystalline matter10.1073/pnas.1711254115 ↗
57. Inherited control of crystal surface reactivity10.1016/j.apgeochem.2018.02.003 ↗
58. A statistical approach for analysis of dissolution rates including surface morphology10.3390/min9080458 ↗
59. Multiscale investigation of olivine (010) face dissolution from a surface control perspective10.1016/j.apsusc.2021.149317 ↗
60. Temporal evolution of dissolution kinetics of polycrystalline calcite10.2475/01.2020.04 ↗
61. The contribution of hydrodynamic processes to calcite dissolution rates and rate spectra10.1016/j.gca.2021.05.003 ↗
62. Calcite dissolution rate spectra measured by in situ digital holographic microscopy10.1016/j.gca.2017.07.001 ↗
63. In situ nanoscale observations of gypsum dissolution by digital holographic microscopy10.1016/j.chemgeo.2017.04.008 ↗
64. Dissolution kinetics of cubic tricalcium aluminate measured by digital holographic microscopy10.1021/acs.langmuir.7b02400 ↗
65. Dissolution and initial hydration behavior of tricalcium aluminate in low activity sulfate solutions10.1016/j.cemconres.2020.105989 ↗
66. Dissolution rate spectra of β-dicalcium silicate in water of varying activity10.1016/j.cemconres.2019.02.014 ↗
67. In situ nano-scale observation of C3A dissolution in water10.1016/j.cemconres.2020.106044 ↗
68. Dissolution and early hydration of tricalcium aluminate in aqueous sulfate solutions10.1016/j.cemconres.2020.106191 ↗
69. In situ electrochemical digital holographic microscopy; a study of metal electrodeposition in deep eutectic solvents10.1021/ac400262c ↗
70. Electrochemistry of single nanodomains revealed by three-dimensional holographic microscopy10.1021/acs.accounts.6b00335 ↗
71. Quantitative temperature measurements in gold nanorods using digital holography10.1021/acsami.0c22420 ↗
72. Real time observation of the anodic dissolution of copper in NaCl solution with the digital holography10.1016/j.elecom.2009.05.008 ↗
73. The anodic dissolution processes of copper in sodium fluoride solution10.1016/S1452-3981(23)07948-8 ↗
74. A. Brand
75. Elucidating the grain-orientation dependent corrosion rates of austenitic stainless steels10.1016/j.matdes.2020.108583 ↗
76. Optical measurement of uniform and localized corrosion of C1018, SS 410, and Inconel 825 alloys using white light interferometry10.1016/j.corsci.2014.06.046 ↗
77. Galvanic corrosion of duplex corrosion-resistant steel rebars under carbonated concrete conditions10.1039/C8RA03320J ↗
78. Spectral modulation interferometry for quantitative phase imaging10.1364/BOE.6.000473 ↗
79. Texture characterization of autogenous Nd: YAG laser welds in AA5182-O and AA6111-T4 aluminum alloys10.1007/s11661-004-0047-2 ↗
80. Spectrally encoded confocal microscopy10.1364/OL.23.001152 ↗
81. Spectral-domain spectrally-encoded endoscopy10.1364/OE.15.002432 ↗
82. Multiplexed 3D imaging using wavelength encoded spectral interferometry: a proof of principle10.1016/S0030-4018(03)01611-0 ↗
83. High-speed interferometric spectrally encoded flow cytometry10.1364/OL.37.005154 ↗
84. Phase uncertainty in digital holographic microscopy measurements in the presence of solution flow conditions
85. Suitability of 3D-printed devices for low-temperature geochemical experiments10.1016/j.apgeochem.2018.08.012 ↗
86. 3D printed mixed flow reactor for geochemical rate measurements10.1016/j.apgeochem.2017.11.008 ↗
87. W. APHA AWWA · 1998
88. Role of nanostructure in pitting of Al–Cu–Mg alloys10.1016/j.electacta.2010.02.001 ↗
89. Anodic dissolution of 304 stainless steel using atomic emission spectroelectrochemistry10.1149/1.1393433 ↗
90. Atomic emission spectroelectrochemistry: Real-time rate measurements of dissolution, corrosion, and passivation10.5006/3336 ↗
91. Impact of ultrafine-grained microstructure on the corrosion of aluminium alloy AA202410.1016/j.corsci.2011.12.016 ↗
92. On the corrosion of additively manufactured aluminium alloy AA2024 prepared by selective laser melting10.1016/j.corsci.2018.08.019 ↗
93. Micro-capillary system coupled to ICP-MS as a novel technique for investigation of micro-corrosion processes10.1039/b705248k ↗
94. Investigation of dealloying of S phase (Al2CuMg) in AA 2024-T3 aluminium alloy using high resolution 2D and 3D electron imaging10.1016/j.corsci.2015.11.013 ↗
95. Localized corrosion in AA2024-T351 aluminium alloy: transition from intergranular corrosion to crystallographic pitting10.1016/j.matchar.2017.06.022 ↗
96. Phase unwrapping with the branch-cut method: role of phase-field direction10.1364/AO.39.004802 ↗
97. Direct measurement of surface dissolution rates in potential nuclear waste forms: the example of pyrochlore10.1021/acsami.5b04281 ↗