Site-occupation and structure relaxation behavior of C14-type stoichiometric and iron-rich Fe2Nb Laves phases with addition of aluminum or chromium
Source abstract
Abstract
Powder X-ray diffraction Rietveld refinement for Al- or Cr-added stoichiometric and Fe-rich off-stoichiometric C14-type Fe 2 Nb Laves phases were examined to elucidate the site-occupation behavior of Al and Cr, and the resulting changes in the lattice parameters and the c/ a axial ratio in the Fe 2Nb Laves phases. In the case of the stoichiometric composition of the Fe 2Nb Laves phase, no anti-site atoms were presented at the Fe and Nb both sites Al or Cr addition to the Fe-33.3at%Nb Laves phase by replacing Fe with Al or Cr did not generate anti-site Fe atoms, and Al and Cr preferentially occupied the Fe sites. Al and Cr atoms can replace Fe atoms at both the 6 h and 2 a Fe sites in the case of Fe-rich alloy, and they also can occupy the Nb site (4 f ) by replacing anti-site Fe atoms. However, Al and Cr had no preferential occupation of any of these sites. The accuracy of Rietveld refinement was confirmed by observation through high-angle annular dark-field scanning transmission electron microscopy. The lattice parameters of the a and c axes increased almost linearly with increasing the added Al or Cr concentrations, but the c/ a ratio showed different behavior. Therefore, the change in c/ a cannot be explained solely in terms of the concentration of the added element; however, it is proposed that the change in c/ a is interpreted by using parameters consistent with site-occupancy values.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Role of grain boundary and grain-boundary precipitation control under creep in heat-resistant steels and alloys at elevated temperature
2. The effect of aging on the microstructure and mechanical behavior of the alumina-forming austenitic stainless steel Fe–20Cr–30Ni–2Nb–5Al10.1016/j.msea.2014.12.072 ↗
3. Investigation on long-term creep rupture properties and microstructure stability of Fe–Ni based alloy Ni–23Cr–7W at 700 °C10.1016/j.msea.2012.12.019 ↗
4. Development of high chromium ferritic steels strengthened by intermetallic phases10.1016/j.msea.2013.11.048 ↗
5. Effect of different precipitation routes of Fe2Hf Laves phase on the creep rate of 9Cr-based ferritic alloys
6. Improving the high-temperature creep strength of 15Cr ferritic creep-resistant steels at temperatures of 923–1023 K10.1016/j.msea.2015.11.068 ↗
7. Creep behavior and microstructure of a 9Cr-3Co-3W martensitic steel10.1007/s10853-016-0595-z ↗
8. Phase equilibria in the Fe-Nb system10.1007/s11669-010-9808-3 ↗
9. Effect of Nb/W ratio on Fe2 (Nb, W) Laves phase formation in Fe-Cr-Al-Nb-W alloy10.2320/jinstmet.J2016027 ↗
10. Thermodynamic assessment of the Fe-Al-Nb system with updated Fe-Nb description10.1007/s11669-017-0566-3 ↗
11. The Cr–Fe–Nb ternary system: experimental isothermal sections at 700 °C, 1050 °C and 1350 °C10.1016/j.jallcom.2015.06.137 ↗
12. A thermochemical study of some selected laves phases10.1016/0001-6160(64)90056-2 ↗
13. Size versus electronic factors in transition metal Laves phase stability10.1088/0953-8984/2/41/006 ↗
14. A thermodynamic interpretation of the size-ratio limits for laves phase formation10.1007/s11661-999-0292-5 ↗
15. Enthalpies of formation of binary Laves phases10.1016/S0966-9795(02)00030-4 ↗
16. Structure and stability of Laves phases. Part I. Critical assessment of factors controlling Laves phase stability10.1016/j.intermet.2004.02.010 ↗
17. Influence of atomic size factors on the phase stability of Laves phase in Nb-Cr-Ni-Al and Nb-V-Ni-Al phase diagrams10.2320/matertrans.MJ201604 ↗
18. Magnetization and Mössbauer effect study of the pseudo-binary system (Ti1-xNbx) Fe210.1016/0304-8853(94)90400-6 ↗
19. Structural studies of stacking variants in Mg-base Friauf-Laves phases10.1107/S0567740880006565 ↗
20. Determination of site occupancy of additives X (X=V, Mo, W and Ti) in the Nb–Cr–X Laves phase by ALCHEMI10.1016/S1359-6454(99)00065-8 ↗
21. Rietveld refinement and ab initio calculations of a C14-like Laves phase in Ti-Zr-Ni10.1080/0950083021000045779 ↗
22. Site preference, thermodynamic, and magnetic properties of the ternary Laves phase Ti(Fe1–xAlx)2 with the crystal structure of the MgZn2-type
23. On the ternary Laves phases Ti(Mn1−xAlx)2 with MgZn2-type10.1016/j.intermet.2007.07.005 ↗
24. The ternary Laves phase Nb(Ni1−xAlx)2 with MgZn2 -type10.1016/j.calphad.2008.07.006 ↗
25. Site occupation reversal in the C14 Laves phase Nb(Cr1–xCox)210.1002/zaac.200801411 ↗
26. Phase equilibria in the ternary Nb-Cr-Al system and site occupation in the hexagonal C14 Laves phase Nb(AlxCr1-x)2
27. A profile refinement method for nuclear and magnetic structures10.1107/S0021889869006558 ↗
28. A fundamental parameters approach to X-ray line-profile fitting10.1107/S0021889891010804 ↗
29. Unit-cell refinement from powder diffraction scans10.1107/S0021889881009618 ↗
30. Crystal structure and atomic size
31. NMR study of magnetic properties of Nb(Fe1−xAlx)210.1143/JPSJ.62.1710 ↗
32. Metal-metalloid exchange in some Friauf-Laves phases containing two transition metals10.1016/0022-5088(85)90266-8 ↗
33. Structural investigations of the Nb1−xSixT2 and Nb1−xAlxT2 (T≡Cr, Mn, Fe, Co, Ni) systems10.1016/0022-5088(86)90690-9 ↗
34. Point defects in binary Laves phase alloys10.1016/S1359-6454(99)00090-7 ↗