journal article·2011-09

Influence of cooling rate on the development of multiple generations of γ′ precipitates in a commercial nickel base superalloy

A.R.P. Singh, S. Nag, J.Y. Hwang, G.B. Viswanathan, J. Tiley, R. Srinivasan, H.L. Fraser, R. Banerjee

Materials Characterization· Volume 62· Issue 9
Publisher page

Abstract

Abstract The compositional and microstructural evolution of different generations of γ′ precipitates during the continuous cooling of a commercial nickel base superalloy, Rene88DT, has been characterized by three dimensional atom probe tomography coupled with energy-filtered transmission electron microscopy studies. After solutionizing in the single γ phase field, continuous cooling at a very high rate results in a monomodal size distribution of γ′ precipitates with a high nucleation density and non-equilibrium compositions. In contrast, a relatively slower cooling rate (~ 24 °C/min) results in a multi-modal size distribution of γ′ precipitates with the larger first generation primary precipitates exhibiting close to equilibrium composition, along with the smaller scale secondary γ′ precipitates, exhibiting non-equilibrium composition (excess of Co and Cr, depleted in Al and Ti). The composition of the γ matrix near these precipitates also exhibits similar trends with the composition being closer to equilibrium near the primary precipitates as compared to the secondary precipitates.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Materials Characterization Techniques · High Temperature Alloys and Creep · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. D.D. Krueger, R.D. Kissinger, R.D. Menzies, C.S. Wukusick, Fatigue crack growth resistant nickel-base article and alloy and method for making, U.S. Patent 4957567, 1990.
2. The structure of Rene' 88DT, superalloys TMS
3. Nanoscale characterization of elemental partitioning between gamma and gamma prime phases in René 88 DT nickel-base superalloy10.1007/s11661-008-9691-2 ↗
4. Compositional variations between different generations of γ′ precipitates forming during continuous cooling of a commercial nickel-base superalloy10.1007/s11661-009-0075-z ↗
5. Reed · 2009
6. Atomic scale structure and chemical composition across order–disorder interfaces10.1103/PhysRevLett.102.086101 ↗
7. The role of the atom probe in the study of nickel-based superalloys10.1016/S1044-5803(99)00050-9 ↗
8. Atom probe field ion microscopy
9. Contributions of atom probe tomography to the understanding of nickel-based superalloys10.1016/S0968-4328(00)00083-4 ↗
10. The use of 3-D atom-probe tomography to study nickel-based superalloys10.1007/BF02748493 ↗
11. Phase chemistry of the superalloy SC16 after creep deformation10.1016/S1359-6454(00)00099-9 ↗
12. Leap microscopes look at TiAl alloys
13. Analysis of three-dimensional atom-probe data by the proximity histogram10.1007/S100050010051 ↗
14. Dependence of interfacial excess on the threshold value of the iso-concentration surface10.1002/sia.1708 ↗
15. Interface analysis with the three-dimensional atom probe10.1002/sia.1086 ↗
16. Phase composition and grain-boundary segregation in a nickel base superalloy: a preliminary TEM–APFIM investigation10.1016/0039-6028(91)90418-R ↗
17. Characterization of Ni-base superalloys on the atomic scale by atom probe tomography and spherical-aberration corrected analytical electron microscopy techniques10.1017/S1431927606065329 ↗
18. Imaging and characterization of fine gamma-prime precipitates in commercial nickel-based superalloys10.1016/j.ultramic.2004.11.014 ↗
19. Characterization of the microstructure evolution in a nickel base superalloy during continuous cooling conditions10.1016/S1359-6454(01)00314-7 ↗
20. Formation of multimodal size distributions of γ′ in a nickel-base superalloy during interrupted continuous cooling10.1016/j.scriptamat.2007.06.014 ↗
21. Phase-field modeling of bimodal particle size distributions during continuous cooling10.1016/S1359-6454(02)00516-5 ↗
22. A phase-field model for heat treatment applications in Ni-based alloys10.1016/j.actamat.2006.01.001 ↗
23. Multimodal size distributions of γ′ precipitates during continuous cooling of UDIMET 720 Li10.1016/j.actamat.2009.08.002 ↗
24. Evaluation of gamma prime volume fractions and lattice misfits in a nickel base superalloy using the external standard X-ray diffraction method10.1016/j.msea.2010.07.036 ↗
25. The effect of volume fraction on particle coarsening: theoretical considerations10.1016/0001-6160(72)90114-9 ↗
26. The coarsening of γ′ precipitates at large volume fractions10.1016/0001-6160(74)90155-2 ↗
27. The coarsening of γ′ in Ni–Al alloys10.1016/0022-3697(66)90110-7 ↗
28. Phase-field modeling of bimodal microstructures in nickel-based superalloys10.1016/j.actamat.2008.10.039 ↗
29. Temporal evolution of the nanostructure and phase compositions in a model Ni–Al–Cr Alloy10.1016/j.actamat.2006.03.015 ↗