Microstructural evolution, phase transition, and physics properties of a high strength Cu–Ni–Si–Al alloy
Source abstract
Abstract
Abstract A Cu–6.0 Ni–1.0 Si–0.5 Al (wt%) alloy was fabricated, and its phase transformation behavior in the early stages of aging treatment were studied systematically, including the mechanical properties, type of precipitates, formation heat of precipitates, elastic strain energy, crystal orientation relationships, and spatial distribution of elements. The experimental results demonstrate that a B2 ordering structured β-NiAl precipitate formed in the matrix as the supersaturation solid solution (SSS) was aged at 400 °C; δ-Ni2Si, a L12 ordering structured β-Ni3Si, and L12 structured γ′-Ni3Al were precipitated from the matrix aged at 450 °C; and discontinuous δ-Ni2Si precipitates occurred in the matrix aged at 500 °C and above. Atom probe results revealed that Ni and Si formed clusters with a size of 1–2 nm, and Al tended to segregate around these clusters as the SSS was aged at 450 °C. The ultimate tensile strength of the studied alloy was 1080.2 ± 20.4 MPa for the sample aged at 450 °C for 1 h, and the electrical conductivity was 25.4% IACS. Sketch maps of the crystal orientation relationships between the matrix and precipitates were also established.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Effect of Ag addition on the microstructure and mechanical properties of Cu-Cr alloy10.1016/j.msea.2018.04.077 ↗
2. Promising CuNiCrSi alloy for first wall ITER applications10.1016/S0022-3115(96)00040-2 ↗
3. Correlations between microstructures and properties of Cu-Ni-Si-Cr alloy10.1016/j.msea.2018.06.075 ↗
4. Hot working behavior of a super high strength Cu-Ni-Si alloy10.1016/j.matdes.2013.05.001 ↗
5. Effect of aging time on the corrosion behavior of a Cu-Ni-Si alloy in 3.5 wt% NaCl solution10.5006/1884 ↗
6. High-temperature deformation behavior of Cu-6.0Ni-1.0Si-0.5Al-0.15Mg-0.1Cr alloy10.1007/s10853-012-6511-2 ↗
7. The evolution of microstructure in Cu-8.0Ni-1.8Si-0.15Mg alloy during aging10.1016/j.msea.2010.07.023 ↗
8. Suppressing spinodal decomposition by adding Co into Cu-Ni-Si alloy10.1016/j.jallcom.2015.11.103 ↗
9. Evaluation of nanoscaled precipitates in a Cu-Ni-Si-Cr alloy during aging10.1016/j.jallcom.2014.06.089 ↗
10. Effects of Cr and Zr additions on microstructure and properties of Cu-Ni-Si alloys10.1016/j.msea.2016.07.021 ↗
11. Effect of V addition on hardness and electrical conductivity in Cu-Ni-Si alloys10.1007/s12540-013-4002-x ↗
12. Effects of small addition of Ti on strength and microstructure of a Cu-Ni-Si alloy10.1007/s11661-015-2870-z ↗
13. The transformation behavior of Cu-8.0Ni-1.8Si-0.6Sn-0.15Mg alloy during isothermal heat treatment10.1016/j.matchar.2011.06.008 ↗
14. Effect of aluminum on microstructure and property of Cu-Ni-Si alloys10.1016/j.msea.2013.02.024 ↗
15. A new ultrahigh strength Cu-Ni-Si alloys10.1016/j.intermet.2013.05.013 ↗
16. Spinodal decomposition, ordering transformation, and discontinuous precipitation in a Cu-15Ni-8Sn alloy10.1016/S1359-6454(98)00095-0 ↗
17. Phase transformation behavior of Cu–10Ni-3Al-0.8Si alloy10.1016/j.matchemphys.2016.02.033 ↗
18. Discontinuous precipitates in age-hardening CuNiSi alloys10.1016/j.matchar.2016.03.017 ↗
19. Microstructures and textures of a Cu-Ni-Si alloy processed by high-pressure torsion10.1016/j.jallcom.2013.05.051 ↗
20. Microstructure and solidification behavior of Cu-Ni-Si alloys10.1016/j.matchar.2008.07.008 ↗
21. Electrical conductor alloys
22. Increasing strength and conductivity of Cu alloy through abnormal plastic deformation of an intermetallic compound10.1038/srep30907 ↗
23. Precipitate structure in a Cu-Ni-Si alloy10.1007/BF00356596 ↗
24. Strengthening of Cu–Ni–Si alloy using high-pressure torsion and aging10.1016/j.matchar.2014.01.006 ↗
25. The crystallographic and morphological evolution of the strengthening precipitates in Cu-Ni-Si alloys10.1016/j.actamat.2012.10.031 ↗
26. Okamoto · Trans. Inset. Met. · 1939 · 336
27. Atomic scale investigation of Cr precipitation in copper10.1016/j.actamat.2012.01.038 ↗
28. Stress relaxation in bending of copper beryllium alloy strip10.1520/JTE10608J ↗
29. Stress relaxation behavior in bending of high strength copper alloys in the Cu-Ni-Sn system10.1016/S0921-5093(97)00462-0 ↗
30. Huang · 2005
31. He · 1982
32. Effect of plastic deformation on the proof strength and electrical conductivity of copper-magnesium supersaturated solid-solution alloys10.2320/matertrans.M2014220 ↗
33. Grain boudary reaction in a Cu-Ni-Mn alloy10.2320/jinstmet1952.46.3_301 ↗
34. Preparation and characterization of CuFe alloy ribbons10.1016/S1875-5372(16)60028-0 ↗
35. The structure and associated properties of an age hardening copper alloy
36. The use of Gibbs free energy-composition diagrams in coherent solids10.1016/0364-5916(89)90020-5 ↗
37. Cohesion in alloys-fundamentals of a semi-empirical model10.1016/0378-4363(80)90054-6 ↗
38. de Boer · 1988
39. Toman · Acta Crystallogr. · 1952 · 5 · 32910.1107/S0365110X52001003 ↗
40. Pilstroem · Acta Chem. Scand. · 1961 · 15 · 89310.3891/acta.chem.scand.15-0893 ↗
41. Connétable · Phys. Rev. B · 2009 · 79
42. Further studies on the Nickel-Aluminium system. 1. β-NiAl and δ-Ni2Al3 phase fields10.1107/S0021889872009203 ↗
43. Thermodynamic properties of Al, Ni, NiAl, and Ni3Al from first principles calculations10.1016/j.actamat.2004.02.014 ↗
44. Wolverton · Phys. Rev. Lett. · 2001 · 86 · 551810.1103/PhysRevLett.86.5518 ↗
45. Effect of coherency on coarsening of second-phase precipitates in Cu-base alloys10.1007/s10853-007-2373-4 ↗
46. Porter · 1981 · 263–78 · 142
47. Teplitskiy · Fiz. Met. Metalloved. · 1975 · 40 · 1240
48. Precipitation in Cu-Ni-Si-Zn alloy for lead frame10.1016/S0167-577X(02)01212-0 ↗
49. Structural evolution during mechanical milling and subsequent annealing of Cu-Ni-Al-Co-Cr-Fe-Ti alloys10.1016/j.matchemphys.2009.07.067 ↗
50. Effects of silicon and thermos-mechanical process on microstructure and properties of Cu-10Ni-3Al-0.8Si alloy10.1016/j.matdes.2014.04.053 ↗
51. Phase transformations behavior in a Cu-8.0Ni-1.8Si alloy10.1016/j.jallcom.2010.12.115 ↗
52. Identification of orthorhombic phase in a high strength cupronickel10.1016/1359-6462(95)00490-4 ↗
53. Precipitation hardening and recrystallization in Cu-4% to 7% Ni-3% Al alloys10.1007/BF01124816 ↗
54. Miscibility gap of B2 phase in NiAl to Cu3Al section of the Cu-Al-Ni system10.1016/j.intermet.2004.10.005 ↗
55. Material properties of high strength beryllium-free copper alloys10.1016/j.msea.2006.01.068 ↗
56. Mechanical properties of Cu–Cr system alloys with and without Zr and Ag10.1007/s10853-007-2159-8 ↗
57. Aging behavior and precipitates analysis of the Cu-Cr-Zr-Ce alloy10.1016/j.msea.2015.10.046 ↗
58. Microstructure and properties of a hot rolled-quenched Cu-Cr-Zr-Mg-Si alloy10.1007/s11665-011-0084-0 ↗
59. Evaluation of high strength, high conductivity CuNiBe alloys for fusion energy applications10.1016/j.jnucmat.2013.09.007 ↗
60. A novel Cu-Ni-Zn-Al alloy with high strength through precipitation hardening10.1016/j.msea.2010.04.089 ↗
61. Microstructure and property of Cu–2.7Ti-0.15Mg-0.1Ce-0.1Zr alloy treated with a combined aging process10.1016/j.msea.2015.10.062 ↗